Carbon Fiber side fins: A few fins more...

RadRod22 · 01-11-2018, 06:48 AM

I’d also be interested in a set for an F36 if you planned on making more.

Kevin_Trxn · 01-18-2018, 10:54 AM

Also Interested, Please send PM if you plan on making more!

Kevin_Trxn · 01-18-2018, 11:05 AM

Quote:

Originally Posted by Gr-Racing

Selling my set for M sport f30, i never got around to install .
Send pm

Messaged

philgraham7 · 06-29-2018, 02:11 PM

Interested in a set for my f32 if you get around to making more

lfepro.g · 06-29-2018, 06:58 PM

Quote:

Originally Posted by philgraham7

Interested in a set for my f32 if you get around to making more

Likewise!

spindiesel · 07-05-2018, 04:20 PM

I'd like a set for f30 m sport.

4DOOR_E90 · 07-07-2018, 09:59 AM

I'd like a set for the 435 grand coupe of your still making them.

vvroom · 07-31-2018, 06:40 PM

Its been a while since I've been on the forums, so I apologize for not responding back to some of you. I'm willing to make another batch (10-14 sets) if they're enough people interested. On the last batch I had made I had some people back out, so I only want to make the exact amount and for the right car.
There's 3 sizes for the fins f30 msport/non msport/f32,36. Before I made the post I wanted to make sure I could still get the carbon fiber panels since it's been a while since I made these. It's going to be around 2-3 weeks until I get everything set up to start making them. Also, I would require the payment in full before I cut all the fins out to make sure I'm not left with any extras. I hope that makes sense. (example:last time I cut some out for an F30 msport and then they never paid so when someone with an non sport or 4 series asked I want able to sell it to them.) As far as the bolts go I could get 3 different titanium colors: BLACK, TITANIUM, RAINBOW. The price of the carbon fiber went up since I last bought some, so the price is going to be $180 shipped (titanium,black) and $185 shipped for the rainbow bolts. If after reading all this you're still interested put your name on the list. Thanks guys.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.

Munchi435i · 07-31-2018, 09:49 PM

Quote:

Originally Posted by vvroom

Its been a while since I've been on the forums, so I apologize for not responding back to some of you. I'm willing to make another batch (10-14 sets) if they're enough people interested. On the last batch I had made I had some people back out, so I only want to make the exact amount and for the right car.
There's 3 sizes for the fins f30 msport/non msport/f32,36. Before I made the post I wanted to make sure I could still get the carbon fiber panels since it's been a while since I made these. It's going to be around 2-3 weeks until I get everything set up to start making them. Also, I would require the payment in full before I cut all the fins out to make sure I'm not left with any extras. I hope that makes sense. (example:last time I cut some out for an F30 msport and then they never paid so when someone with an non sport or 4 series asked I want able to sell it to them.) As far as the bolts go I could get 3 different titanium colors: BLACK, TITANIUM, RAINBOW. The price of the carbon fiber went up since I last bought some, so the price is going to be $180 shipped (titanium,black) and $185 shipped for the rainbow bolts. If after reading all this you're still interested put your name on the list. Thanks guys.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.

Would be interested but need to see some pictures of the finished product and how they look on the car installed please.

nothingspecial · 08-02-2018, 10:32 AM

Also in for pictures. Highly interested.

vvroom · 08-02-2018, 11:22 AM

Quote:

Originally Posted by Munchi435i

Would be interested but need to see some pictures of the finished product and how they look on the car installed please.

Quote:

Originally Posted by nothingspecial

Also in for pictures. Highly interested.

Most of the pictures I have are on the thread. You're looking specifically for 4 series right? If so, post #106,134,176 show the fins installed. Hope that helps. I'll look through my phone and computer for additional photos as well.

nothingspecial · 08-04-2018, 01:18 PM

I see. Are you going to be doing side skirt extensions any time soon by chance?

Matty353 · 08-18-2018, 01:52 PM

Side skirt extensions look brilliant can I make a order on them ??

EDWYER · 09-28-2018, 08:58 PM

Add me to the list. Pm sent.

EDWYER · 10-12-2018, 10:53 AM

OP, any update?

cardone73@hotmail.com · 01-27-2019, 08:35 PM

Quote:

Originally Posted by vvroom

Its been a while since I've been on the forums, so I apologize for not responding back to some of you. I'm willing to make another batch (10-14 sets) if they're enough people interested. On the last batch I had made I had some people back out, so I only want to make the exact amount and for the right car.
There's 3 sizes for the fins f30 msport/non msport/f32,36. Before I made the post I wanted to make sure I could still get the carbon fiber panels since it's been a while since I made these. It's going to be around 2-3 weeks until I get everything set up to start making them. Also, I would require the payment in full before I cut all the fins out to make sure I'm not left with any extras. I hope that makes sense. (example:last time I cut some out for an F30 msport and then they never paid so when someone with an non sport or 4 series asked I want able to sell it to them.) As far as the bolts go I could get 3 different titanium colors: BLACK, TITANIUM, RAINBOW. The price of the carbon fiber went up since I last bought some, so the price is going to be $180 shipped (titanium,black) and $185 shipped for the rainbow bolts. If after reading all this you're still interested put your name on the list. Thanks guys.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.

I have a 2013 f30 328 would love these carbon rears with rainbow bolts are you still making them?

EDWYER · 01-27-2019, 08:58 PM

Quote:

Originally Posted by cardone73@hotmail.com

are you still making them?

I am in as well but OP never replied.

vvroom · 04-21-2019, 02:49 PM

Quote:

Originally Posted by ProjectBoost

OP, any update?

Quote:

Originally Posted by cardone73@hotmail.com

I have a 2013 f30 328 would love these carbon rears with rainbow bolts are you still making them?

Updated on first page

EDWYER · 04-21-2019, 02:57 PM

Quote:

Originally Posted by vvroom

Updated on first page

Thanks. I ended up getting a set from another member.

alexng72 · 05-18-2019, 12:56 AM

Quote:

Originally Posted by vvroom

Quote:

Originally Posted by ProjectBoost

OP, any update?

Quote:

Originally Posted by cardone73@hotmail.com

I have a 2013 f30 328 would love these carbon rears with rainbow bolts are you still making them?

Updated on first page

Let me know when they are available. Thanks!

fortythirtyfive · 07-26-2021, 04:11 PM

Decided to have a go at making a beefier version of these myself.

Opted for double sided 2mm sheet carbon for the fins - really wish the 5mm sheets weren't quite as expensive as I'd much prefer those.. the 2mm sheets tend to become a bit invisible at certain angles.

I might look into 3d printing and then carbon skinning the fins so that thicker versions can be achievable

01-11-2018, 06:48 AM	#199
RadRod22 Enlisted Member 3 Rep 31 Posts Drives: F36 Join Date: Aug 2017 Location: Torrance, CA iTrader: (0)	I’d also be interested in a set for an F36 if you planned on making more.
	Appreciate 0 Quote

01-18-2018, 10:54 AM	#200
Kevin_Trxn Second Lieutenant 604 Rep 295 Posts Drives: '17 340i Join Date: May 2017 Location: San Diego iTrader: (0)	Also Interested, Please send PM if you plan on making more!
	Appreciate 0 Quote

06-29-2018, 02:11 PM	#202
philgraham7 Private 9 Rep 89 Posts Drives: 2015 435xi Join Date: Oct 2017 Location: Buffalo, NY iTrader: (1)	Interested in a set for my f32 if you get around to making more
	Appreciate 0 Quote

07-05-2018, 04:20 PM	#204
spindiesel Second Lieutenant 318 Rep 281 Posts Drives: 2024 M3 Comp X drive Join Date: Apr 2011 Location: syracuse iTrader: (2)	I'd like a set for f30 m sport.
	Appreciate 0 Quote

07-07-2018, 09:59 AM	#205
4DOOR_E90 Private First Class 97 Rep 159 Posts Drives: M3 Join Date: Jan 2017 Location: NY iTrader: (0)	I'd like a set for the 435 grand coupe of your still making them.
	Appreciate 0 Quote

07-31-2018, 06:40 PM	#206
vvroom Private First Class 137 Rep 179 Posts Drives: F36 435i Join Date: May 2015 Location: Los Angeles iTrader: (4)	Its been a while since I've been on the forums, so I apologize for not responding back to some of you. I'm willing to make another batch (10-14 sets) if they're enough people interested. On the last batch I had made I had some people back out, so I only want to make the exact amount and for the right car. There's 3 sizes for the fins f30 msport/non msport/f32,36. Before I made the post I wanted to make sure I could still get the carbon fiber panels since it's been a while since I made these. It's going to be around 2-3 weeks until I get everything set up to start making them. Also, I would require the payment in full before I cut all the fins out to make sure I'm not left with any extras. I hope that makes sense. (example:last time I cut some out for an F30 msport and then they never paid so when someone with an non sport or 4 series asked I want able to sell it to them.) As far as the bolts go I could get 3 different titanium colors: BLACK, TITANIUM, RAINBOW. The price of the carbon fiber went up since I last bought some, so the price is going to be $180 shipped (titanium,black) and $185 shipped for the rainbow bolts. If after reading all this you're still interested put your name on the list. Thanks guys. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12.
	Appreciate 0 Quote

08-02-2018, 10:32 AM	#208
nothingspecial Second Lieutenant 77 Rep 227 Posts Drives: 2018 X3 M340i Join Date: Feb 2018 Location: Las Vegas iTrader: (1)	Also in for pictures. Highly interested.
	Appreciate 0 Quote

08-04-2018, 01:18 PM	#210
nothingspecial Second Lieutenant 77 Rep 227 Posts Drives: 2018 X3 M340i Join Date: Feb 2018 Location: Las Vegas iTrader: (1)	I see. Are you going to be doing side skirt extensions any time soon by chance?
	Appreciate 0 Quote

08-18-2018, 01:52 PM	#211
Matty353 Registered 0 Rep 1 Posts Drives: Btw 335i f30 Join Date: Aug 2018 Location: Belfast iTrader: (0)	Side skirt extensions look brilliant can I make a order on them ??
	Appreciate 0 Quote

09-28-2018, 08:58 PM	#212
EDWYER Yoda of mods 1673 Rep 3,005 Posts Drives: X5 RWD Join Date: Feb 2018 Location: NC iTrader: (40) Garage List 2015 X5 RWD [0.00] 2016 BMW M2 [10.00]	Add me to the list. Pm sent. __________________ Current: 2020 Explorer ST (Agate Black Metallic), F15 SGM RWD F87 AW (retired) F30 SBM 316rwhp/440rwtq (retired) Follow me on Twitter: https://twitter.com/EdwyerCLT YT: https://www.youtube.com/@DWYERGARAGE/videos Last edited by EDWYER; 09-28-2018 at 09:08 PM..
	Appreciate 0 Quote

10-12-2018, 10:53 AM	#213
EDWYER Yoda of mods 1673 Rep 3,005 Posts Drives: X5 RWD Join Date: Feb 2018 Location: NC iTrader: (40) Garage List 2015 X5 RWD [0.00] 2016 BMW M2 [10.00]	OP, any update? __________________ Current: 2020 Explorer ST (Agate Black Metallic), F15 SGM RWD F87 AW (retired) F30 SBM 316rwhp/440rwtq (retired) Follow me on Twitter: https://twitter.com/EdwyerCLT YT: https://www.youtube.com/@DWYERGARAGE/videos
	Appreciate 0 Quote

07-26-2021, 04:11 PM	#219
fortythirtyfive Major 640 Rep 1,381 Posts Drives: 435i MS Join Date: Sep 2016 Location: North iTrader: (0)	Decided to have a go at making a beefier version of these myself. Opted for double sided 2mm sheet carbon for the fins - really wish the 5mm sheets weren't quite as expensive as I'd much prefer those.. the 2mm sheets tend to become a bit invisible at certain angles. I might look into 3d printing and then carbon skinning the fins so that thicker versions can be achievable __________________ 2015 435i - 401whp Scorpion catless dp, VRSF 6.5" HD FMIC, MST V2 inlet, NGK 97506, MHD Stage 2+ 102, xHP Stage 3, M Performance Exhaust (modified for valved straight thru)
	Appreciate 1 Pussiwillow521.00 Quote