[RoopD]

Shawn

Can you PM me also. I am interested


Gr
Roopd

[shawnsheridan]

Originally Posted by RoopD

Shawn

Can you PM me also. I am interested


Gr
Roopd

PM sent.

[horhegxg]

Hi Shawn,

Can you pm me also.

Thanks in advance!

[shawnsheridan]

Originally Posted by horhegxg

Hi Shawn,

Can you pm me also.

Thanks in advance!

PM sent.

[hapyluna]

Originally Posted by shawnsheridan

PM sent.

Hello Shawn.


Could you please send me PM this info as well?
Thanks for your help

[shawnsheridan]

Originally Posted by hapyluna

Hello Shawn.

Could you please send me PM this info as well?
Thanks for your help

PM sent.

[killit]

Originally Posted by shawnsheridan

Yes, and yes. PM sent.

Hey Brotha... Can you pm me when you have a second! Just picked up a 14 328i and nav hasn't ever been updated!

Thanks!

[shawnsheridan]

Originally Posted by killit

Hey Brotha... Can you pm me when you have a second! Just picked up a 14 328i and nav hasn't ever been updated!

Thanks!

PM sent.

[pcp1234]

hi guys. is it possible to generate fsc code without connecting to a car with a cable? appreciate your help

[shawnsheridan]

Originally Posted by pcp1234

hi guys. is it possible to generate fsc code without connecting to a car with a cable? appreciate your help

You either pull file from Car Head Unit or from BMW Server, but the latter requires dealer access.

[andrew.webber]

Hi There Guys,

I though that I was being clever and used SWID_FscShort="0028002F" in lookup.xml to generate a FSC code for CIC Premium Western Europe 2018-2 and the generated code does not work!

Could someone (ie Shawn) maybe please give me the correct short code to use?

Many Thanks

Andrew

[pcp1234]

Originally Posted by shawnsheridan

You either pull file from Car Head Unit or from BMW Server, but the latter requires dealer access.

Hi Shawnsheridian

could you please elaborate on option nr 1 ?

[shawnsheridan]

Originally Posted by andrew.webber

Hi There Guys,

I though that I was being clever and used SWID_FscShort="0028002F" in lookup.xml to generate a FSC code for CIC Premium Western Europe 2018-2 and the generated code does not work!

Could someone (ie Shawn) maybe please give me the correct short code to use?

Many Thanks

Andrew

0x28 0x32

[andrew.webber]

Originally Posted by shawnsheridan

0x28 0x32

Great thanks Shawn - much appreciated.

Andrew

[shawnsheridan]

Originally Posted by pcp1234

Hi Shawnsheridian

could you please elaborate on option nr 1 ?

See Post # 5.

[pcp1234]

thank you. struggling to get it working. could i have a clue for road map europe next 2018-2 please?

[shawnsheridan]

Originally Posted by pcp1234

thank you. struggling to get it working. could i have a clue for road map europe next 2018-2 please?

Pull DE File from NBT, feed DE File to FSC Gen using parameters 0xA9 0x32.

[pcp1234]

appreciate your help so far. got my dads car to update his maps and he has ROAD MAP EUROPE PREMIUM 2010. I see that there are currently 2018-1 version, however split is West and East. Do I update it to both versions (West and East) or just one?

[shawnsheridan]

Originally Posted by pcp1234

appreciate your help so far. got my dads car to update his maps and he has ROAD MAP EUROPE PREMIUM 2010. I see that there are currently 2018-1 version, however split is West and East. Do I update it to both versions (West and East) or just one?

You can only load one or the other. U.K. is West.

[Iangiulu]

Hi guys, I read in the previous page that the FSC code to update Route Map on HU_EntryNav must be bought from dealer because ASAP access is needed. Something changed or this is the only way to get an activation code for this map? Thank you.

[shawnsheridan]

Originally Posted by Iangiulu

Hi guys, I read in the previous page that the FSC code to update Route Map on HU_EntryNav must be bought from dealer because ASAP access is needed. Something changed or this is the only way to get an activation code for this map? Thank you.

There is no public FSC Generator for ROUTE Map Update, so you cannot do it yourself. But you do not need to pay Dealer. PM sent.

[BadSeed]

Just wanted to thank all those who posted instructions & what worked for them Most difficult part for me was getting the VIN to show up in E-Sys. Below are the order of steps I think worked for me.

Prerequisite: disable all firewalls, Antivirus & WiFi. Set Ethernet to DHCP (not static)
1. Connect ENET cable to OBD port
2. Connect ENET to laptop Ethernet port
3. Start vehicle (DO NOT step on the brakes, engine does not have to be on)
4. Wait until Ethernet has yellow exclamation ! Open command prompt & type ipconfig
5. Ensure you have 169.254.xxx.xxx IP address for Ethernet
6. Launch E-Sys Launcher (NOT E-Sys)
7. Select Connect

8. Select appropriate Target (based on I-Level)

Note: Don’t use _DIRECT

9. Select Connection via VIN
10. Select Connect
11. Click Expert Mode
12. Select FSC Extended

13. Diagnostic Address (hex) = 0x63
14. Click Identify

15. Application Number (hex/dec) – 0xDE
16. Upgrade Index (hex/dec) – 0x1

17. Scroll down & select StoreFSC
18. Select Add to the batch button (>>)

19. Select Read
20. Select Save
21. Use the following naming format when saving FSC file. XXXXXXX_000DE001.fsc
Note: XXXXXXX is the last 7 of your VIN

>>> Generating FSC code for map updates <<<

1. Copy NBT.EXE + XXXXXXX_000DE001.fsc to C:\EC-APPS folder
2. Open command prompt & go to C:\EC-APPS folder
Type: NBT XXXXXXX_000DE001.fsc 0xa8 0x32 XXXXXXX > code.txt

Ex: C:\EC-APPS> NBT XXXXXXX_000DE001.fsc 0xa8 0x32 XXXXXXX > code.txt


This will create a file called code.txt with the map FSC code inside


I used the FSC file as is, did not have to use BASE64 or decode the file.

Out of laziness, decided to use a batch file that I used to generate FSC for my CIC

Ex: batch file. Note: replace XXXXXXX w/ the last 7 of your VIN
ECHO OFF
CLS
IF NOT EXIST NBT.exe ECHO File NBT.exe NOT FOUND!
IF NOT EXIST XXXXXXX_000DE001.fsc ECHO XXXXXXX_000DE001.fsc does NOT EXIST!
c:\EC-APPS\NBT XXXXXXX_000DE001.fsc 0xa8 0x32 XXXXXXX > code.txt
IF %ERRORLEVEL% EQU 0 ECHO File code.txt was created successfully!
PAUSE

Place & run batch file in C:\EC-Apps where NBT.exe & your FSC file is located.

NBT.exe I have is dated 7/1/2015 (77KB). Seems to be newer than what I found in the ZIP files posted by others.

Uploaded all the files I use here if anyone wants it: https://drive.google.com/drive/folde...Nl?usp=sharing

>>> Determine Region & Map sequence code <<<
Note: requires HxD application: https://mh-nexus.de/en/hxd/

Region & Map sequence code - located in the 1st folder of the map files
File path = 1\INFO_MAP_NANT_#####\Info_Map.imp

North America NEXT: