Fsc code Generator

brstlk · 08-02-2018, 04:46 PM

How to sync maps FSC for NBT EVO =?

shawnsheridan · 08-02-2018, 05:20 PM

Quote:

Originally Posted by brstlk

How to sync maps FSC for NBT EVO =?

What is meaning of "sync maps FSC"?

brstlk · 08-02-2018, 05:23 PM

Quote:

Originally Posted by shawnsheridan

What is meaning of "sync maps FSC"?

fsc code for nbt evo How do I get it

F30 3.20 I ed 2015 in my car navigation is off

shawnsheridan · 08-02-2018, 05:42 PM

Quote:

Originally Posted by brstlk

fsc code for nbt evo How do I get it

F30 3.20 I ed 2015 in my car navigation is off

PM sent.

BadSeed · 08-04-2018, 09:05 AM

Just curious as to what everyone's procedure is that always shows "Connection via VIN"? vs being grayed out.

I tried this same exact procedure on an 2013 F10 M5 & after 3 tries, it was still grayed out.

1. Connect ENET cable to OBD port
2. Connect ENET to laptop Ethernet port
3. Start vehicle (DO NOT step on the brakes, engine does not have to be on)
4. Wait until Ethernet has yellow exclamation ! Open command prompt & type ipconfig
5. Ensure you have 169.254.xxx.xxx IP address for Ethernet

- 1st try the door was left unlocked (everything off) & has been sitting for an hour while the key was at least 100 ft away
- 2nd try I locked the door and waited 2 minutes, key 3 ft away
- 3rd try I locked the door and waited 5 minutes, key 3 ft away

Was in a hurry so I didn't try locking the doors for a longer period of time before trying again (sleep mode)
Is that 15 minutes or 30 minutes to enter sleep mode?

My initial testing was on a 2015 M6 GC

Thanks

pcp1234 · 08-11-2018, 06:33 PM

Can I learn too how to get fsc for nbo evo please?

shawnsheridan · 08-11-2018, 06:48 PM

Quote:

Originally Posted by pcp1234

Can I learn too how to get fsc for nbo evo please?

PM sent.

Lykke · 08-12-2018, 12:37 PM

Can anyone help with the short code or Loockup file for Europe NEXT 2018-2. I have tried 0xa8 0x32 without success. Thank you in advance.

shawnsheridan · 08-12-2018, 12:46 PM

Quote:

Originally Posted by Lykke

Can anyone help with the short code or Loockup file for Europe NEXT 2018-2. I have tried 0xa8 0x32 without success. Thank you in advance.

Europe is A9, not A8, so 0xA9 0x32.

vmiro · 08-18-2018, 07:45 AM

Hi, what parameters should I use to generate FSC code for Road Map Europe Premium 2018-2 ?

Thanks

shawnsheridan · 08-18-2018, 08:50 AM

Quote:

Originally Posted by vmiro

Hi, what parameters should I use to generate FSC code for Road Map Europe Premium 2018-2 ?

Thanks

0x28 0x32

RoopD · 08-19-2018, 04:24 AM

@shawnsheridan

Can I learn too how to get fsc for nbo evo please

Thnx RoopD

shawnsheridan · 08-19-2018, 08:32 AM

Quote:

Originally Posted by RoopD

@shawnsheridan

Can I learn too how to get fsc for nbo evo please

Thnx RoopD

PM sent.

vmiro · 08-20-2018, 01:32 AM

Quote:

Originally Posted by shawnsheridan

0x28 0x32

Great, thanks

22marco77 · 08-21-2018, 01:22 PM

Quote:

Originally Posted by shawnsheridan

PM sent.

Could you send me this information too?
Thanks for the help!

shawnsheridan · 08-21-2018, 01:31 PM

Quote:

Originally Posted by 22marco77

Could you send me this information too?
Thanks for the help!

PM sent.

6ixSpd · 08-24-2018, 04:23 PM

Does anyone have the instructions for updating to North America Next 2018-2 on a NBT?

shawnsheridan · 08-24-2018, 04:24 PM

Quote:

Originally Posted by 6ixSpd

Does anyone have the instructions for updating to North America Next 2018-2 on a NBT?

See Post #5.

And latest is North America NEXT 2019-1.

6ixSpd · 08-24-2018, 05:05 PM

Quote:

Originally Posted by shawnsheridan

See Post #5.

And latest is North America NEXT 2019-1.

Got it. Thanks.

So if I am doing it the old CMD Prompt way, 0xA8 is for NBT North America 2018-2, right?

As for the maps, what should the root directory of the USB look like?

shawnsheridan · 08-24-2018, 05:26 PM

Quote:

Originally Posted by 6ixSpd

Got it. Thanks.

So if I am doing it the old CMD Prompt way, 0xA8 is for NBT North America 2018-2, right?

As for the maps, what should the root directory of the USB look like?

0xA8 - North America NEXT; 0x32 - 2018-2. Root has 4 folders named 1, 2, 3, and 4, and the 3 files.

6ixSpd · 08-24-2018, 05:31 PM

Quote:

Originally Posted by shawnsheridan

Quote:

Originally Posted by 6ixSpd

Got it. Thanks.

So if I am doing it the old CMD Prompt way, 0xA8 is for NBT North America 2018-2, right?

As for the maps, what should the root directory of the USB look like?

0xA8 - North America NEXT; 0x32 - 2018-2. Root has 4 folders named 1, 2, 3, and 4, and the 3 files.

You da man!

micstar · 08-29-2018, 02:14 PM

When i use the SW ID reader (DE) v.1.2.1 it gives me this:

Starting...F-serie...
Ediabas version: 7.3.0
Ignition: = OKAY
------------------------------------
Trying...
Reading CAS...
CAS: VIN - J56XXXX
Setting addresse: = OKAY
Reading CIC...
CIC: VIN - J56XXXX
------------------------------------

Total bytes: 0
------------------------------------

And a 0 byte file is no good. What goes wrong?

EDIT:
I follow the complete guide for installing the patched EDIABAS, configured using the konfigurator, copied files to Ecu, searched via ZGW and now has the problem in the ID SW reader

08-02-2018, 04:46 PM	#1849
brstlk New Member 3 Rep 6 Posts Drives: F30 Join Date: Aug 2018 Location: Turkey iTrader: (0)	How to sync maps FSC for NBT EVO =?
	Appreciate 1 FlorinQCK-2.50 Quote

08-04-2018, 09:05 AM	#1853
BadSeed Second Lieutenant 171 Rep 270 Posts Drives: ///M6 GC Join Date: May 2015 Location: OC \| CA iTrader: (0) Garage List 2015 BMW M6 [0.00] 2010 BMW M5 [10.00]	Just curious as to what everyone's procedure is that always shows "Connection via VIN"? vs being grayed out. I tried this same exact procedure on an 2013 F10 M5 & after 3 tries, it was still grayed out. 1. Connect ENET cable to OBD port 2. Connect ENET to laptop Ethernet port 3. Start vehicle (DO NOT step on the brakes, engine does not have to be on) 4. Wait until Ethernet has yellow exclamation ! Open command prompt & type ipconfig 5. Ensure you have 169.254.xxx.xxx IP address for Ethernet - 1st try the door was left unlocked (everything off) & has been sitting for an hour while the key was at least 100 ft away - 2nd try I locked the door and waited 2 minutes, key 3 ft away - 3rd try I locked the door and waited 5 minutes, key 3 ft away Was in a hurry so I didn't try locking the doors for a longer period of time before trying again (sleep mode) Is that 15 minutes or 30 minutes to enter sleep mode? My initial testing was on a 2015 M6 GC Thanks
	Appreciate 1 FlorinQCK-2.50 Quote

08-11-2018, 06:33 PM	#1854
pcp1234 Private 29 Rep 87 Posts Drives: G03 Join Date: Jul 2018 Location: Leeds iTrader: (0)	Can I learn too how to get fsc for nbo evo please?
	Appreciate 1 FlorinQCK-2.50 Quote

08-12-2018, 12:37 PM	#1856
Lykke New Member 5 Rep 7 Posts Drives: I3 BEV & I3 REX Join Date: Sep 2015 Location: Denmark iTrader: (0)	Can anyone help with the short code or Loockup file for Europe NEXT 2018-2. I have tried 0xa8 0x32 without success. Thank you in advance.
	Appreciate 1 FlorinQCK-2.50 Quote

08-18-2018, 07:45 AM	#1858
vmiro Enlisted Member 16 Rep 36 Posts Drives: BMW 318d E91 Join Date: Oct 2009 Location: Bijeljina, BiH iTrader: (0)	Hi, what parameters should I use to generate FSC code for Road Map Europe Premium 2018-2 ? Thanks
	Appreciate 1 FlorinQCK-2.50 Quote

08-19-2018, 04:24 AM	#1860
RoopD Private 21 Rep 85 Posts Drives: F30 Alpine Weiss Join Date: Apr 2018 Location: Netherlands iTrader: (0)	@shawnsheridan Can I learn too how to get fsc for nbo evo please Thnx RoopD
	Appreciate 1 FlorinQCK-2.50 Quote

08-24-2018, 04:23 PM	#1865
6ixSpd Save the manuals! 6078 Rep 6,770 Posts Drives: '16 M3, '23 718 Spyder Join Date: Feb 2016 Location: 416 iTrader: (4)	Does anyone have the instructions for updating to North America Next 2018-2 on a NBT? __________________ '16 M3 \| '23 718 Spyder Past: E92 M3, F87 M2, E39 M5, etc
	Appreciate 1 FlorinQCK-2.50 Quote

08-29-2018, 02:14 PM	#1870
micstar New Member 9 Rep 22 Posts Drives: F30 BMW 320d Join Date: Aug 2018 Location: DK iTrader: (0)	When i use the SW ID reader (DE) v.1.2.1 it gives me this: Starting...F-serie... Ediabas version: 7.3.0 Ignition: = OKAY ------------------------------------ Trying... Reading CAS... CAS: VIN - J56XXXX Setting addresse: = OKAY Reading CIC... CIC: VIN - J56XXXX ------------------------------------ Total bytes: 0 ------------------------------------ And a 0 byte file is no good. What goes wrong? EDIT: I follow the complete guide for installing the patched EDIABAS, configured using the konfigurator, copied files to Ecu, searched via ZGW and now has the problem in the ID SW reader Last edited by micstar; 08-29-2018 at 02:18 PM.. Reason: more info
	Appreciate 1 FlorinQCK-2.50 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search