10-07-2020, 07:20 PM | #1 |
Lieutenant Colonel
993
Rep 1,934
Posts |
Anyone ever come across one of the Brembos with a missing bushing in the mount hole?
Just got my set from powder coating (neon yellow ). I guess I never noticed before dropping them off but the mount was off (circled in red). I took photos of the parts before drop off so I can confirm it wasn't lost. Seems that it came this way from my source Also attached and unpainted set that clearly shows the "bushing". I've contacted Zeckheusen to see if he can work his wizardry, but wanted to check here as well to cover my bases. If it's not something I can source I may try to punch it out from my current set on the car? (If that's even possible) It was definitely pressed in, though. All else fails I'll have to find another caliper and have that one painted to match
__________________
F30 335iX | Remus Axleback | Fabspeed Catted DP | VRSF Comp IC | 18X9 ET35 19lb MT1 | 255/40/18 ECS | Ohlins RT Millway Street | Millway Control Arm Bushings | Turner Endlinks | TMH 75mm 14x1.5 Studs | BMW MPerf LSD | XDelete | Pipercross Filter | MHD Stg2 93
|
10-08-2020, 09:22 PM | #2 |
Lieutenant Colonel
993
Rep 1,934
Posts |
Bump
__________________
F30 335iX | Remus Axleback | Fabspeed Catted DP | VRSF Comp IC | 18X9 ET35 19lb MT1 | 255/40/18 ECS | Ohlins RT Millway Street | Millway Control Arm Bushings | Turner Endlinks | TMH 75mm 14x1.5 Studs | BMW MPerf LSD | XDelete | Pipercross Filter | MHD Stg2 93
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|