bootmod3 N20-PWG-L stage1 93 v4.3 is FAST!!!

benny888 · 05-23-2020, 10:33 AM

i have their OTS map but hv little problem with first release (V1 or V2 i forgot) the timing is little bit strange as i posted before https://f30.bimmerpost.com/forums/sh....php?t=1504519

but then they fixed it on V3 or V4 map, no more timing/knocking/warning issue or whatsoever.

i flashed their latest version 4.3 recently, i can tell it is a strong map and holy fast

, i feel like my car is upgraded, more traction control light flashing on same road same condition

i recommend everyone with N20-PWG-L upgrade their map to 4.3 asap !!!!

but what i am actually concern is how they can do that? will this map hurt the engine?? so i did some datalogs and see if anyone can help me take a look at those

https://www.bootmod3.net/log?id=5ec9...0b4373874edf8e
https://www.bootmod3.net/log?id=5ec9...0b4373874edf88

thanks all

pierreye · 05-23-2020, 08:39 PM

Check your pre throttle pressure. Yours highest reading around 25.4 psi. Mine previously hit 31 psi and PTF give me another tune and my pre throttle now max out around 24 psi. V4.3 does feel more brutal during acceleration.

benny888 · 05-23-2020, 11:44 PM

Quote:

Originally Posted by pierreye

Check your pre throttle pressure. Yours highest reading around 25.4 psi. Mine previously hit 31 psi and PTF give me another tune and my pre throttle now max out around 24 psi. V4.3 does feel more brutal during acceleration.

anything else beside the pre throttle pressure? or they all look good

thanks

DadzBmer_N2o · 05-25-2020, 09:30 PM

Hey how about mine, does this look okay..

mike@x-ph.com · 05-26-2020, 01:08 PM

DadzBmer_N2o · 05-26-2020, 04:48 PM

Quote:

Originally Posted by mike@x-ph.com

Mike, is that for me lol..

mike@x-ph.com · 05-26-2020, 08:08 PM

Quote:

Originally Posted by DadzBmer_N2o

Mike, is that for me lol..

That was for OP, you need to post a full datalog to check. Better yet, send it to PTF

benny888 · 06-01-2020, 06:09 AM

Quote:

Originally Posted by pierreye

Check your pre throttle pressure. Yours highest reading around 25.4 psi. Mine previously hit 31 psi and PTF give me another tune and my pre throttle now max out around 24 psi. V4.3 does feel more brutal during acceleration.

they just send me new map and which is perfect

https://www.bootmod3.net/log?id=5ed3...729b6c712903c0
https://www.bootmod3.net/log?id=5ed3...90c66237c1d07d

MacklinUSOB · 06-03-2020, 08:42 AM

I have been on 4.3 for a while and you're totally right, the car feels much faster.

On the older versions I occasionally had some strange hesitation when rolling into the throttle sharply but I haven't been able to get that to happen since flashing 4.3. It feels like the 4.3 release comes with more reliability and power, which is a home run. Enjoy.

05-23-2020, 10:33 AM	#1
benny888 New Member 4 Rep 24 Posts Drives: 2012 f30 328i Join Date: Jun 2018 Location: Hong Kong iTrader: (0)	bootmod3 N20-PWG-L stage1 93 v4.3 is FAST!!! i have their OTS map but hv little problem with first release (V1 or V2 i forgot) the timing is little bit strange as i posted before https://f30.bimmerpost.com/forums/sh....php?t=1504519 but then they fixed it on V3 or V4 map, no more timing/knocking/warning issue or whatsoever. i flashed their latest version 4.3 recently, i can tell it is a strong map and holy fast, i feel like my car is upgraded, more traction control light flashing on same road same condition i recommend everyone with N20-PWG-L upgrade their map to 4.3 asap !!!! but what i am actually concern is how they can do that? will this map hurt the engine?? so i did some datalogs and see if anyone can help me take a look at those https://www.bootmod3.net/log?id=5ec9...0b4373874edf8e https://www.bootmod3.net/log?id=5ec9...0b4373874edf88 thanks all
	Appreciate 0 Tweet Quote

05-23-2020, 08:39 PM	#2
pierreye Lieutenant 212 Rep 500 Posts Drives: F10 & G01 Join Date: Jun 2018 Location: Malaysia iTrader: (0)	Check your pre throttle pressure. Yours highest reading around 25.4 psi. Mine previously hit 31 psi and PTF give me another tune and my pre throttle now max out around 24 psi. V4.3 does feel more brutal during acceleration.
	Appreciate 1 benny8884.00 Quote

05-25-2020, 09:30 PM	#4
DadzBmer_N2o First Lieutenant 93 Rep 338 Posts Drives: F30 320ix Join Date: Jan 2020 Location: Frederick, MD iTrader: (0)	Hey how about mine, does this look okay.. Attached Images __________________ 2013 320ix N20 8AT\|BM3 stg1\|Muff Res Delete\|HPB-LED-Amber-DRL's IG: DadzBmer_N2o
	Appreciate 0 Quote

05-26-2020, 01:08 PM	#5
mike@x-ph.com BimmerPost Supporting Vendor 24174 Rep 190,750 Posts Drives: 07-335/12-328/18-M4/21-M4CP Join Date: Sep 2013 Location: Las Vegas iTrader: (23)	__________________ Check out our current sale by clicking on this link! https://x-ph.com/sale/ Phone number 702-494-9435
	Appreciate 1 benny8884.00 Quote

06-03-2020, 08:42 AM	#9
MacklinUSOB Captain 518 Rep 891 Posts Drives: f30 328i 6MT Sport Join Date: Jan 2017 Location: Connecticut iTrader: (0)	I have been on 4.3 for a while and you're totally right, the car feels much faster. On the older versions I occasionally had some strange hesitation when rolling into the throttle sharply but I haven't been able to get that to happen since flashing 4.3. It feels like the 4.3 release comes with more reliability and power, which is a home run. Enjoy. __________________ 328i RWD \| MW on CRed Slick Top \| 6MT \| BM3 \| MPE \| GPlus FMIC \| CSF Radiator \| Millway Street Camber Plates & Monoballs \| KW V2 6k/18k Swift Springs \| F80 LCA/TS \| SPL Bump Steer Kit \| APEX SM-10 \| R-S4 \| DS2500 \| RBF600 \| SS Lines \| Past: E36 328is & E38 740i
	Appreciate 2 benny8884.00 Quote