[mightycrown]

Hi
Has any one reset short circuit of Fem module with tool32. Would be Nice to know how this is done

[mightycrown]

No one? damn dealer want char 200 US for this job.

[HFW003]

What do you mean by "short circuit"?

[mightycrown]

I mean that the FEM will count no. Of short circuites have been occurred . If. It exceeds 50 times, FEM will shut it down.

[Yaasir007]

has someone figured that out how to do it on FEM?

[Billfitz]

What are you doing to cause 50 short circuits? How you you know you've had short circuits? What are you using for a diagnostic tool?

[Weebyx]

Originally Posted by Yaasir007

has someone figured that out how to do it on FEM?

At one point I stumpled on this guy who is doing it on E90 FRM, maybe you can use it to do it on F30 FEM also ?

[Claudio]

Hi,

did you solve the issue?

Maybe i can help you id it needed it

Originally Posted by Weebyx

At one point I stumpled on this guy who is doing it on E90 FRM, maybe you can use it to do it on F30 FEM also ?

[biomed27]

Originally Posted by Claudio

Hi,

did you solve the issue?

Maybe i can help you id it needed it

I could use some help

[Ibo24]

You need Toolset32 for this, you got that?

[Billfitz]

Most ODB diagnostic tools with code clearing ability will do it, but first you've got to identify and fix the fault, otherwise it will just keep happening.

[xpro]

Originally Posted by Billfitz

Most ODB diagnostic tools with code clearing ability will do it, but first you've got to identify and fix the fault, otherwise it will just keep happening.

They wont.

Bmw's have a fault counter. If the same fault happens say 100x, ( a faulty bulb, or some other DTC for example) the ecu disables the circuit and the fault becomes permanent.

Only Genuine BMW tool like tool32 can reset the fault.

[Billfitz]

I had a multiple short fault, I cleared it with my Foxwell 510.

[Ajdly00]

Originally Posted by Billfitz

I had a multiple short fault, I cleared it with my Foxwell 510.

Is this the one? I’ve never used one before, is it pretty straightforward?

FOXWELL NT510 Elite Full Systems Scanner for BMW Automotive Obd2 Code Reader Bidirectional Diagnostic Scan Tool with SRS EPB SAS TPS Active Test Oil Reset Battery Registration https://www.amazon.com/dp/B019QCG5RE..._NyyiFbKNFTZTE

[Billfitz]

That's what I have. That price is high, do some searching. It's $129 here: https://www.foxwellmall.com/wholesal...8aArYhEALw_wcB

[akf30]

Any luck? I recently downloaded tool32, going to try to do this on my f30 and reset short circuit for angel eyes, as I repaired the damaged wires.

[Enabled]

Tool32
FEM_20

Reset Job: steuern_reset_kurzschlussabschaltung
argument: Choose the bulb number from the table labeled TAB_AUSGANG_LEUCHTEN (found in the table information window)





To find the number of short circuit counts run job: status_kurzschlusscounter_abs without any arguments. That will also tell you the name of the light (to look up in the TAB_AUSGANG_LEUCHTEN table above)


-Enabled

[Chris1999]

Hi, Tabellen info tab is not showing on Tool32. Is there any other way to find the name of lamp? Thanks

[Ibo24]

Put in: 0XFF
Should reset everything.

[Jdswifty]

For anyone else looking at resetting this like I have been
Bimmerlink connected with an enet cable allows you reset the too many short circuit faults.

Just done this with my f31 330d

[JuniorTech]

try using Dr.Gini for resetting short circuit counter in FEM module