[TomFord514]

Hello, was wondering if anyone would have any information on this. I have a 2018
Bmw 330i xdrive and currently run 20” staggered set up 405m mags. With our road conditions I keep blowing tires with pot holes and need a higher profile. I’m looking to downsize to 18” and was wondering if 245/45/18 will fit. I found replica mags that are 18” 8.5 width and offset of 25. Not too familiar with these things so any help would be greatly appreciated!

[alohasurftoad]

245/45/18=26.7" diameter. It will fit within the fenderwell, however at full lock the tire will rub the fenderwell liner due to poke from low offset.

[TomFord514]

Thank you for your reply and input!
Would you recommend any of these sizes that would work best without any issues? Still keeping the same 8.5 width mag with the 25 offset.

225/45/18
235/45/18

[TomFord514]

Update: The offset is 40 on the mags not 25. He made a mistake! Not sure if that helps!