[thebigb]

Code: p10e2
Issue: VVL-Sensors Supply Voltage Circuit

Before going to a shop. Has anyone had any experience with the issues listed above?


Heres a video of how it sounds: https://youtube.com/shorts/ZNmihlq_T...GHQbNaYXHcFyJQ

[EuroTechny631]

Hey man,

So basically let’s start here,

According to the code, it’s your Valvetronic servomotors position sensors. “Open circuit or line disconnection”

1. Check wiring harness at the valvetronic servomotor
2. Check for visible breaks in wires coming from DME or along engine harness leading to servomotor.

There are aime “programming updates” that could contribute or fix your issue, but it’s more likely your valvetronic motor has failed internally.

It’s not a super complex job, but it’s crucial to make sure the adaptions procedure is followed after the servomotor is replaced so the VVT system can function properly.

Feel free to ask any questions if you need more info.