[Works]

When can we expect to get official support for the hybrid -e models? Apparently beta for these has been ongoing for months, what's the holdup?

[siiiilky]

Anyone know if this log looks ok?

http://www.bootmod3.net/log?id=5d63fa7eae729b6759791e9b

[jcdub]

Originally Posted by Works

When can we expect to get official support for the hybrid -e models? Apparently beta for these has been ongoing for months, what's the holdup?

+1
Although Hybris a member on here is running a bootmod3 map on his 330e

[hybris]

Originally Posted by jcdub

+1
Although Hybris a member on here is running a bootmod3 map on his 330e

Yep, but it's a beta map from the closed beta period.

[Dominic 88]

Still waiting OTS maps for 330e. For now l just get stage 1 93. Hope they will release OTS maps for b48 e hybrid shortly.

[Works]

Originally Posted by Dominic 88

Still waiting OTS maps for 330e. For now l just get stage 1 93. Hope they will release OTS maps for b48 e hybrid shortly.

Perhaps we could get an official word on where we are with the *30e models?

[MilanF30]

Originally Posted by siiiilky

Anyone know if this log looks ok?

http://www.bootmod3.net/log?id=5d63fa7eae729b6759791e9b

Is this B46/B48 engine? Boost is holding up excellent past 5k rpm... Only strange thing is that throttle angle is taking forever to reach 100%

[archon-x]

http://www.bootmod3.net/log?id=5d73a...eVI_9QXTccqCyg

Can anyone give an expert view on this data log and advise if it's fine?

Running OTS Stage 2 91 oct AGG

ER Catless DP installed.

[Works]

Originally Posted by archon-x

http://www.bootmod3.net/log?id=5d73a...eVI_9QXTccqCyg

Can anyone give an expert view on this data log and advise if it's fine?

Running OTS Stage 2 91 oct AGG

ER Catless DP installed.

Not an absolute expert on this, but your timing ramp seems to have quite a lot of deviation in it. Do you have a chance sometime in the future to try a higher quality fuel?

[siiiilky]

Originally Posted by MilanF30

Is this B46/B48 engine? Boost is holding up excellent past 5k rpm... Only strange thing is that throttle angle is taking forever to reach 100%

B48

[archon-x]

Originally Posted by Works

Not an absolute expert on this, but your timing ramp seems to have quite a lot of deviation in it. Do you have a chance sometime in the future to try a higher quality fuel?

No chance to get Higher grade fuel here, unfortunately.

Sought advise from PTF and was told to run the ACN map, it's looking much much much better now, with less power though.

http://www.bootmod3.net/log?id=5d793...LvA8iCVXvUnxeY

[archon-x]

Originally Posted by MilanF30

Is this B46/B48 engine? Boost is holding up excellent past 5k rpm... Only strange thing is that throttle angle is taking forever to reach 100%

Perhaps due to traction control?

[MilanF30]

I doubt that, if it was traction control, you'd have 100% throttle, and than TC would close it back to less than 100% until you get a grip, than it will go back to 100%

[proTUNING Freaks]

UPDATE:
https://f30.bimmerpost.com/forums/sh....php?t=1663520

[proTUNING Freaks]

UPDATE, Startup roar added for B48/B58:
https://f30.bimmerpost.com/forums/sh....php?t=1665377

[proTUNING Freaks]

UPDATE: Map configuration screen descriptions for all settings and values available.

This should help those using the screen for the first time get a sense of what the values are if or when they may not be clear. I realize some of you will enjoy these being added right in the screen even though all of them are documented in the actively maintained bootmod3 User Manual.

[samnikkhah]

Hey everyone, right now i have a stage 1 with a resonator and muffler delete. I have a vrsf dp and bms intake on the way. I want to go to stage 2, will I be fine if i do not push the car too hard, to not get an upgrade intercooler or charge pipe.

Thanks in advance.

[chowser51]

do you have the B48/B46 engine? I believe all you need is the dp to go to stage 2.
The B48 has an air to water intercooler and there haven't been reports of charge pipe issues. I'm just waiting to get a catted downpipe (emissions testing in my area) to go to stage 2, everything else is stock except for my bms intake and occ.

[Alvin1001]

Does bm3 works with the 2019 July istep?

B48 320i

[jcdub]

Originally Posted by chowser51

do you have the B48/B46 engine? I believe all you need is the dp to go to stage 2.
The B48 has an air to water intercooler and there haven't been reports of charge pipe issues. I'm just waiting to get a catted downpipe (emissions testing in my area) to go to stage 2, everything else is stock except for my bms intake and occ.

What dp are you going with? I'm running stage 1 and I'd like a catted do that won't create errors

[chowser51]

Originally Posted by jcdub

What dp are you going with? I'm running stage 1 and I'd like a catted do that won't create errors

I'm looking at the catted Evolution Raceworks ones.
Armytrix has a decatted one with cat simulator but I don't know if that will pass a visual inspection in my area.

[Luverse]

Originally Posted by Alvin1001

Does bm3 works with the 2019 July istep?

B48 320i

i'm on Feb 2020 istep, and BM3 works perfectly on my 330i