[dmanb2b]

Originally Posted by Info@mad-us.com

Tire pressure is low gotta update your dme.

[SRB440IGC]

Originally Posted by oem.plus_440gc

You can either send your DME codes to PTF support email or you can use the MHD app and it will show you right there if you are able to flash or if you are locked.

Kern417 on youtube has the video showing it.

Also don't make the same mistake I did and order the Enet cable with adapter before reading that it ONLY WORKS WITH IOS. Good stuff.

[MTWO]

Originally Posted by dmanb2b

Can we stop confusing DMEs produced after June 2020, with the older DMEs? If you have a DME made before June 2020 and it has been locked by the dealer, a $200 bench unlock is all that's needed. Newer DME's, yes outside of the FEMTO/Russia option, choices if any are very limited....for the time being

If you send your DME to PTF they bench unlock free

[MTWO]

Originally Posted by oem.plus_440gc

You can either send your DME codes to PTF support email or you can use the MHD app and it will show you right there if you are able to flash or if you are locked.

Kern417 on youtube has the video showing it.

PTF just pushed an update to and it tells you if you need bench unlock or obd ok or if you need femto

[dmanb2b]

Originally Posted by MTWO

If you send your DME to PTF they bench unlock free

Even better