[J555]

Guys, is there any coding to enable showing speed over 260 km/h (160 mph) on instrument display (6WA) and/or on HUD?

I guess it should be possible, but can't find anything...

[Dang3r]

This must be a local thing or a restriction within the system, I got the drivers pack installed and it shows beyond 280km/h

[J555]

Originally Posted by Dang3r

This must be a local thing or a restriction within the system, I got the drivers pack installed and it shows beyond 280km/h

Do you you mean your M4? Asking because it is different - the standard cars have speedometer to 260 only and the displays are showing no higher than 260, too...

[Dang3r]

No, my F32 before was also limited to 250km/h before and maximum displayed speed was 254km/h. This is equal to the normal M4 with maximum speed of 250km/h without the drivers package. Speedo may go to 330 onto the scale but thats it.
When you are be able to manage to delete the limiter and enable the DP into your car (when available) you have to code also the new limits to the system. I know a guy who owns the brand new Z4 and his speedscale is ending at 330km/h, but this was coded by the guys which had powered up the whole car.

[J555]

Originally Posted by Dang3r

I know a guy who owns the brand new Z4 and his speedscale is ending at 330km/h, but this was coded by the guys which had powered up the whole car.

Thanks, I already removed the limiter and looking exactly for this - only the coding to show the speed over 260 km/h (I was able to hit and show 260 km/h even before the limiter removal, but then the limiter kicked in).

[Dang3r]

Another problem you would encounter at the scales, when they are ending at 260 you have to put an advanced scale wrap above it to cover the new speed area. When the HUD shows the new limits, the speedo should also.

[J555]

Originally Posted by Dang3r

Another problem you would encounter at the scales, when they are ending at 260 you have to put an advanced scale wrap above it to cover the new speed area. When the HUD shows the new limits, the speedo should also.

I don't plan to touch the speedometer. I have seen various cars that hit the end of physical instrument, but the digitals continue further. I expect this should be possible here, too...

[F20_M135i]

I'm reviving this topic, because I too am looking for a way (if it exists) to code the digital speed between our two dials (F series) so that it finally exceeds 264 km/h