F30POST
F30POST
2012-2015 BMW 3-Series and 4-Series Forum
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read
BMW 3-Series and 4-Series Forum (F30 / F32) | F30POST > Technical Forums > F30 DIYs and Coding Discussions > ECU flash failed on a couple modules. next step?
proTUNING Freaks
Post Reply
 
Thread Tools Search this Thread
      04-03-2020, 02:25 PM   #89
lheo
Registered
0
Rep
4
Posts

Drives: bmw F30
Join Date: Apr 2020
Location: Paris

iTrader: (0)

Hello,
thank you for giving me the icom and enet tfd64 configuration.
Appreciate 0
      04-03-2020, 02:27 PM   #90
lheo
Registered
0
Rep
4
Posts

Drives: bmw F30
Join Date: Apr 2020
Location: Paris

iTrader: (0)

Smile Flash NBT

Hello,
thank you for giving me the icom and enet tfd64 configuration.
Appreciate 0
      04-05-2020, 08:35 AM   #91
lheo
Registered
0
Rep
4
Posts

Drives: bmw F30
Join Date: Apr 2020
Location: Paris

iTrader: (0)

Flash NBT

No one to inform me?
Appreciate 0
      04-05-2020, 08:37 AM   #92
lheo
Registered
0
Rep
4
Posts

Drives: bmw F30
Join Date: Apr 2020
Location: Paris

iTrader: (0)

No one to inform me?
Appreciate 0
      10-31-2020, 09:22 PM   #93
mandomedic122
Private First Class
United_States
41
Rep
133
Posts

Drives: BMW 2019 X5M G05, Mini 2016 S
Join Date: Oct 2014
Location: El Paso, Texas

iTrader: (0)

TFD64 Configuration

Can you please send me tfd64 configuration.

Thanks in advace
Appreciate 0
      10-31-2020, 11:34 PM   #94
shawnsheridan
General
shawnsheridan's Avatar
United_States
10340
Rep
40,310
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by mandomedic122 View Post
Can you please send me tfd64 configuration.

Thanks in advace
1) Laptop should not be connected to any Network (Wired or Wireless).

2) Launch TFTP server

http://tftpd32.jounin.net/

IP Pool Start = 169.254.199.98
Size of Pool = 3
Def Router = 169.254.199.99
Mask = 255.255.0.0

3) Connect ENET Cable from PC to Car

4) PC and Car should be assigned 169.254.xxx.xxx IP Address from TFTP server.

5) Make Connection to Car with E-Sys Connect via VIN.
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Appreciate 1
      11-01-2020, 06:37 AM   #95
Shane11
Registered
0
Rep
1
Posts

Drives: BMW F10
Join Date: Nov 2020
Location: Malaysia

iTrader: (0)

shawnsheridan Hello!! I have a F10 (2012) which is originally the Japanese spec. It has a FM frequency of 75-90MHz only. I heard that the frequency can be changed with some minor coding. Changing the radio country from japan to australia would do the trick, I assume. I need your help on how to solve this issue. Could you please send me a link to E-Sys, Launcher, PSdZdata and instructions of installation? And my computer runs on Windows 10 - 64bit. Thank you in advance
Appreciate 0
      11-01-2020, 11:01 AM   #96
shawnsheridan
General
shawnsheridan's Avatar
United_States
10340
Rep
40,310
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by Shane11 View Post
shawnsheridan Hello!! I have a F10 (2012) which is originally the Japanese spec. It has a FM frequency of 75-90MHz only. I heard that the frequency can be changed with some minor coding. Changing the radio country from japan to australia would do the trick, I assume. I need your help on how to solve this issue. Could you please send me a link to E-Sys, Launcher, PSdZdata and instructions of installation? And my computer runs on Windows 10 - 64bit. Thank you in advance
I replied to your same PM.
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Appreciate 0
      11-01-2020, 02:24 PM   #97
H3685
New Member
3
Rep
14
Posts

Drives: BMW
Join Date: Jun 2015
Location: Monaco

iTrader: (0)

Today did a retrofit on a F20 LCI from halogen to LED headlights (non adaptive)

Added 5A2 to the VO and VO coded some modules.
FLE 43 and 44 had no cafd.
Tried to inject different types cafd files but no succes.
I thought the istep on the modules is older as the shipment istep (F020-18-03-530).


Tried to flash the FLE modules it highlights HWEL in both FLE's. (See pic)
When I push "HW-IDs from SVTactual" the HWEL is not black but completely gone.
I bought 2 new FLE modules but there not from BMW itself, there from XENUS.
Ok it's not OEM but had some work done in the past with the same brand and that worked fine so I gave it another try.
I'm trying different istep shipment dates to see if any of them make the HWEL version black but there are alot of options...

When selecting istep shipm F020-16-03-505 and older I get this code when calculating:
Code:
Generating target SVT with strategy complete flash and integration level "F020-19-07-562" (target) and "F020-16-03-501" (shipment) failed. [C324]
KIS error: Die Werksverbauung enthält an der Diagnoseadresse 0x60 mehrere 100%-BNTN [0200000CE4FFFFFF, 0100000A52033D02, 0800000E50074001, 0800000E52074000, 0800000E51074000, 0200000140FFFFFF, 0800000E4F07400A, 0600000E4E073F00, 010000088B023F02]. [1283]
Anything I'm overlooking or that I can try?

The blue "UNKN_FFFFFFFF_255_255_255" has something to do with it?

PS: for flashing I'm using esys directly. No launcher involved.
Attached Images
  

Last edited by H3685; 11-01-2020 at 02:30 PM..
Appreciate 0
      11-01-2020, 03:19 PM   #98
shawnsheridan
General
shawnsheridan's Avatar
United_States
10340
Rep
40,310
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by H3685 View Post
Today did a retrofit on a F20 LCI from halogen to LED headlights (non adaptive)

Added 5A2 to the VO and VO coded some modules.
FLE 43 and 44 had no cafd.
Tried to inject different types cafd files but no succes.
I thought the istep on the modules is older as the shipment istep (F020-18-03-530).


Tried to flash the FLE modules it highlights HWEL in both FLE's. (See pic)
When I push "HW-IDs from SVTactual" the HWEL is not black but completely gone.
I bought 2 new FLE modules but there not from BMW itself, there from XENUS.
Ok it's not OEM but had some work done in the past with the same brand and that worked fine so I gave it another try.
I'm trying different istep shipment dates to see if any of them make the HWEL version black but there are alot of options...

When selecting istep shipm F020-16-03-505 and older I get this code when calculating:
Code:
Generating target SVT with strategy complete flash and integration level "F020-19-07-562" (target) and "F020-16-03-501" (shipment) failed. [C324]
KIS error: Die Werksverbauung enthält an der Diagnoseadresse 0x60 mehrere 100%-BNTN [0200000CE4FFFFFF, 0100000A52033D02, 0800000E50074001, 0800000E52074000, 0800000E51074000, 0200000140FFFFFF, 0800000E4F07400A, 0600000E4E073F00, 010000088B023F02]. [1283]
Anything I'm overlooking or that I can try?

The blue "UNKN_FFFFFFFF_255_255_255" has something to do with it?

PS: for flashing I'm using esys directly. No launcher involved.
HWEL must be Black. So, redo flash, but this time after you calculate SVT Target (SVT_soll), check the box that says "HW-IDs from SVTactual" and then Save it. If HWEL is Black only, no Red / Blue HWEL, then you can proceed to flash it.
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Appreciate 0
      11-01-2020, 03:22 PM   #99
H3685
New Member
3
Rep
14
Posts

Drives: BMW
Join Date: Jun 2015
Location: Monaco

iTrader: (0)

Quote:
Originally Posted by shawnsheridan View Post
HWEL must be Black. So, redo flash, but this time after you calculate SVT Target (SVT_soll), check the box that says "HW-IDs from SVTactual" and then Save it. If HWEL is Black only, no Red / Blue HWEL, then you can proceed to flash it.
That's the problem.
When I click HW-IDs from SVTactual there is no HWEL at all...
It disappears as shown in the second picture.
Maybe I'm doing something wrong?
Appreciate 0
      11-01-2020, 03:23 PM   #100
shawnsheridan
General
shawnsheridan's Avatar
United_States
10340
Rep
40,310
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by H3685 View Post
That's the problem.
When I click HW-IDs from SVTactual there is no HWEL at all...
It disappears as shown in the second picture.
Maybe I'm doing something wrong?
No idea. I never ever see HWEL disappear before.
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Appreciate 0
      11-01-2020, 03:24 PM   #101
H3685
New Member
3
Rep
14
Posts

Drives: BMW
Join Date: Jun 2015
Location: Monaco

iTrader: (0)

Quote:
Originally Posted by shawnsheridan View Post
No idea. I never ever see HWEL disappear before.
Me neither 😂
Appreciate 0
      11-02-2020, 04:34 AM   #102
H3685
New Member
3
Rep
14
Posts

Drives: BMW
Join Date: Jun 2015
Location: Monaco

iTrader: (0)

Another strange thing I have had in some retrofit i did.
When adding some vo codes and writing it to the car it works fine, when I try to vo code some modules there is no change in the module.
I click the module itself to vo code and not the underlying cafd.

Also with my current retrofit led headlights
Installed front and rear height sensors, connected them to the icm.
VO coded vcm but nothing changed in the module...
When trying to calibrate the sensors with ista d it says there are no height sensors for my model configuration...

I had same issues with lci rear tail lights on f30.
Needes to fdl code all the lines.
For my current car I can't find out what the fdl codes are as the cad ncd tool doesn't work with the new cafd files...

Am I missing something?
Appreciate 0
      11-04-2020, 03:10 PM   #103
H3685
New Member
3
Rep
14
Posts

Drives: BMW
Join Date: Jun 2015
Location: Monaco

iTrader: (0)

Quote:
Originally Posted by shawnsheridan View Post
HWEL must be Black. So, redo flash, but this time after you calculate SVT Target (SVT_soll), check the box that says "HW-IDs from SVTactual" and then Save it. If HWEL is Black only, no Red / Blue HWEL, then you can proceed to flash it.
Bought 2 new FLE2 modules from BMW original.
Installing, inject cafd and everything works perfect.
Difference between the two modules is the hardware version that's mentioned on the part.

the working BMW part says: HWEL: 2B8F 03.01.00
The not working Xenus part says: HWEL: 2FE0 03.01.00


Everything working but got a fault for my ride height sensors.
It says the wrong light switch is installed (I installed one without manual adjustment).
For one or another reason the ICM settings are not changed when I VO code it after adding 5A2 to the option list.
Anyone any idea what is happening?

CAFD NCD tool is not working for the files unfortunately...
Any help would be apreciated
Appreciate 0
      11-04-2020, 03:25 PM   #104
shawnsheridan
General
shawnsheridan's Avatar
United_States
10340
Rep
40,310
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by H3685 View Post
Bought 2 new FLE2 modules from BMW original.
Installing, inject cafd and everything works perfect.
Difference between the two modules is the hardware version that's mentioned on the part.

the working BMW part says: HWEL: 2B8F 03.01.00
The not working Xenus part says: HWEL: 2FE0 03.01.00


Everything working but got a fault for my ride height sensors.
It says the wrong light switch is installed (I installed one without manual adjustment).
For one or another reason the ICM settings are not changed when I VO code it after adding 5A2 to the option list.
Anyone any idea what is happening?

CAFD NCD tool is not working for the files unfortunately...
Any help would be apreciated
Sorry, but I have no idea.
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Appreciate 0
      11-08-2020, 01:15 AM   #105
H3685
New Member
3
Rep
14
Posts

Drives: BMW
Join Date: Jun 2015
Location: Monaco

iTrader: (0)

Quote:
Originally Posted by H3685 View Post
Bought 2 new FLE2 modules from BMW original.
Installing, inject cafd and everything works perfect.
Difference between the two modules is the hardware version that's mentioned on the part.

the working BMW part says: HWEL: 2B8F 03.01.00
The not working Xenus part says: HWEL: 2FE0 03.01.00


Everything working but got a fault for my ride height sensors.
It says the wrong light switch is installed (I installed one without manual adjustment).
For one or another reason the ICM settings are not changed when I VO code it after adding 5A2 to the option list.
Anyone any idea what is happening?

CAFD NCD tool is not working for the files unfortunately...
Any help would be apreciated
To answer my own question.
Eventually this problem is solved.
It was indeed due to a lack in coding.
For one or anothe reason the VO coding from the FEM_BODY module was not complete for the automatic ride height sensors.
With the help of custom retrofit garage we added 552 adpative led headlights and vo coded the car.
That way the fault about the ride height sensors was gone but came some faults for adaptive led.
Compared the 2 files and removed the AHL stuff from it.

Problem solved.
Very strange why this is happening but at the at the car works flawless.
Appreciate 0
      01-31-2021, 11:24 AM   #106
Emre_18
Registered
0
Rep
1
Posts

Drives: F34
Join Date: Jan 2021
Location: Nederland

iTrader: (0)

I have problem. I have replaced steering box from g30. Then I tried to flash eps module. Now I no longer see the whole module fa. Probably hardware removed during flashing but not restored. Help me pleas
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 05:16 AM.




f30post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST