[88tuning.id]

Originally Posted by Ibo24

Could you please send me that to, how to configure tfd32. Might come in handy when I would flash my KOMBI, FEM_GW.

can you please PM me this one shawnsheridan

Thank You

T

and to the one above who's having a problem updating the HU_NBT, try update the NBT with your firewall OFF.
happened to me back then, turns out that my firewall blocking the connection.

Hope thiss help

T

[shawnsheridan]

Originally Posted by 88tuning.id

can you please PM me this one shawnsheridan

Thank You...

PM sent.

[gleb068]

can you please PM me this one shawnsheridan

[shawnsheridan]

Originally Posted by gleb068

can you please PM me this one shawnsheridan

PM sent.

[art03]

Originally Posted by shawnsheridan

PM sent.

please send me PM, how to configure tfd32. I would flash my KOMBI with enet

[shawnsheridan]

Originally Posted by art03

please send me PM, how to configure tfd32. I would flash my KOMBI with enet

You cannot Send or Receive PM's yet. Send me one when you can.

[butala]

Shawnsheridan, please sent to me guide for flash ECUs and how to config tfd64 (I run Win7 64bit) to flash all ECUs.

Thanks you.

[shawnsheridan]

Originally Posted by butala

Shawnsheridan, please sent to me guide for flash ECUs and how to config tfd64 (I run Win7 64bit) to flash all ECUs.

Thanks you.

PM sent.

[Cidaro]

I have a problem with HU_NBT--63

when I want to code blue one I see this error:
"Abort!
<ECU "HU_NBT--63" of selected CAF not found. But it should have been added before. >"

the red one HU_NBT2--63 I can not code and also when I click on "Detect CAF for SWE" there is an error:
"Actual SVT has to contain at least one BTLD. [G093]"

see picture:
[IMG] https://ibb.co/3ygwDkr [/IMG]
https://ibb.co/3ygwDkr

Could you please tell me what should I do step by step?

It happend when I changed in FA 853 to 8A1 and click on the ECU "code". It was a bad idea because after that there was a lot of errors. I fixed everything but I can not restore the red CAFD from the picture

[shawnsheridan]

Originally Posted by Cidaro

I have a problem with HU_NBT--63

when I want to code blue one I see this error:
"Abort!
<ECU "HU_NBT--63" of selected CAF not found. But it should have been added before. >"

the red one HU_NBT2--63 I can not code and also when I click on "Detect CAF for SWE" there is an error:
"Actual SVT has to contain at least one BTLD. [G093]"

see picture:

https://ibb.co/3ygwDkr

Could you please tell me what should I do step by step?

It happend when I changed in FA 853 to 8A1 and click on the ECU "code". It was a bad idea because after that there was a lot of errors. I fixed everything but I can not restore the red CAFD from the picture

There is no picture.

[Cidaro]

the picture is here at the link:
https://ibb.co/3ygwDkr

[shawnsheridan]

Originally Posted by Cidaro

the picture is here at the link:
https://ibb.co/3ygwDkr

FA shows you have NBT (in Blue), but you modified FA in way that it expects NBT2 (Red). Fix FA to match car hardware.

[Cidaro]

I have a backup of FA, so should I load a backup and after that click code at ECU's?

[shawnsheridan]

Originally Posted by Cidaro

I have a backup of FA, so should I load a backup and after that click code at ECU's?

Maybe. No idea what it is your are trying to do. If backup is original unmodified FA, and you code with it, you will get factory codings, which may be what you already have.

If you code all ECU as you suggest, the motor better not be running. You cannot code DME / DDE with motor running.

[Cidaro]

I've just done that (load FA from backup -> ECUs "code") and everything came back to the factory like language, sidemarkers etc. but NBT2 is still in red like it was before :/ What else can I do?

[shawnsheridan]

Originally Posted by Cidaro

I've just done that (load FA from backup -> ECUs "code") and everything came back to the factory like language, sidemarkers etc. but NBT2 is still in red like it was before :/ What else can I do?

NBT was in Blue. NBT2 was in Red. You do not have 2 head units in car. You do not have NBT2. Reset SVT and then Read ECU. Nothing should be in Red.

[Cidaro]

It's still in red :/ (Reset SVT --> Read ECU --> Calculate = HU_NBT2 in red)
picture/link:
https://ibb.co/pZmW1mJ

Maybe something is wrong with my first FA file which I saved in "Coding" Form.


Now when I click on:
VCM --> Master --> Write SVT --- I get an error:

"The following ECUs have a wrong bus ID: [BaseVariant=HU_NBT, DiagAddress=63].
Do you want to write the SVT anyway? [C235]"

picture/link with error:
https://ibb.co/hMTy7tK

[shawnsheridan]

Originally Posted by Cidaro

It's still in red :/ (Reset SVT --> Read ECU --> Calculate = HU_NBT2 in red)
picture/link:
https://ibb.co/pZmW1mJ

Maybe something is wrong with my first FA file which I saved in "Coding" Form.


Now when I click on:
VCM --> Master --> Write SVT --- I get an error:

"The following ECUs have a wrong bus ID: [BaseVariant=HU_NBT, DiagAddress=63].
Do you want to write the SVT anyway? [C235]"

picture/link with error:
https://ibb.co/hMTy7tK

You dont have NBT2, you have NBT. NBT2 shouldn't even be showing if you Read (ECU), not Read (SVT).

[Cidaro]

If I click "Read ECU" then nothing is in red.

After that when I want to change for example radio frequency from us to eu

HU_CIC / 3002 AUDIO_TUNER_TRAFFIC / RADIO_COUNTRY = ece (changed from US) / Werte=00
ANZEIGE_FREQ = nicht_aktiv / Werte=00
FM_DEEMPHASIS=50us (changed from 75)

then "code" NBT everything seems to be loaded correctly with no errors but there is no effect... when I go again to FDL then evertything are not changed to EU. I can repeat that a few times with no effect.

When I click "Read ECU" --> "Calculate" again I see NBT2 in red

What am I doing wrong? Before the issue with changing FA --> "ECUs" --> "code" (result = a lot of errors) everything was fine and the radio was converted US to EU without any problems.

[shawnsheridan]

Originally Posted by Cidaro

If I click "Read ECU" then nothing is in red.

After that when I want to change for example radio frequency from us to eu

HU_CIC / 3002 AUDIO_TUNER_TRAFFIC / RADIO_COUNTRY = ece (changed from US) / Werte=00
ANZEIGE_FREQ = nicht_aktiv / Werte=00
FM_DEEMPHASIS=50us (changed from 75)

then "code" NBT everything seems to be loaded correctly with no errors but there is no effect... when I go again to FDL then evertything are not changed to EU. I can repeat that a few times with no effect.

When I click "Read ECU" --> "Calculate" again I see NBT2 in red

What am I doing wrong? Before the issue with changing FA --> "ECUs" --> "code" (result = a lot of errors) everything was fine and the radio was converted US to EU without any problems.

You need to use "CODE FDL", NOT "CODE".

[Cidaro]

Yesterday I didn't check it because it was 1:20AM so I was going home, but today I checked it and as always you have rigth
Thank you for your support!!!

[shawnsheridan]

Originally Posted by Cidaro

Yesterday I didn't check it because it was 1:20AM so I was going home, but today I checked it and as always you have rigth
Thank you for your support!!!