06-10-2023, 12:39 PM | #1 |
New Member
0
Rep 11
Posts |
bmw f30 eps coding help.
Hi, i just bought used eps rack, but when i read ecu in esys, eps isnt shiwing up. when i read vcm, eps does shows up, but when i click read coding data, i get this error
Transaktions-Report: Aktion: Codierdaten lesen CAFD_00000C77_000_003_000 Fehler: CPS read from ECU "ECUId:EPS_0x30" failed! [C070] negative response error: code: TIMEOUT P2/T2 occurred description: P2 timeout on Service RDBI_CPS has error in result: [Severity=2051][ErrorCode=58640][ErrorCodeDescription=resource not available][VendorCode=2142][VendorCodeDescription=P2 timeout occured]; LinkName: EPS_30_ETHERNET severity: ERROR [2130765072] |
06-10-2023, 10:27 PM | #3 |
New Member
0
Rep 11
Posts |
Thanks for the help!
The plug with 3 thin cables was cut , and I reattached the 3 wires , yiu tbink this could be the problem? If so would I need a new wire harness and mine can’t be repaired? Thanks again ! |
Appreciate
0
|
06-11-2023, 04:04 AM | #4 |
Private First Class
38
Rep 139
Posts |
Looking at the connector at the bottom of the picture, the terminals look corroded. My suggestion would be to have a new wiring harness as a starting point. One could fear that the module itself are fried as well.
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|