[shawnsheridan]

Originally Posted by matteis

Hi shawn,

would you mind send me it as well?

Tks in advance

PM sent.

[deecox187]

Hello Schawn can you send me EDIABAS to clear my faut code ?

[shawnsheridan]

Originally Posted by deecox187

Hello Schawn can you send me EDIABAS to clear my faut code ?

PM sent.

[pokerface]

hello Shawn, could you send me the link to Tool32? I have the OBD cable and need figure out what errors the car is throwing.

thanks

[shawnsheridan]

Originally Posted by pokerface

hello Shawn, could you send me the link to Tool32? I have the OBD cable and need figure out what errors the car is throwing.

thanks

PM sent,

If you want to clear error codes, then Tool32 is good. If you want to interpret error codes to anything meaningful, it won't help you.

[pokerface]

Originally Posted by shawnsheridan

PM sent,

If you want to clear error codes, then Tool32 is good. If you want to interpret error codes to anything meaningful, it won't help you.

Thanks for the link. Searching online it seems that error code translations have been provided on another site

Could you also forward Esys link?

[shawnsheridan]

Originally Posted by pokerface

Thanks for the link. Searching online it seems that error code translations have been provided on another site

Could you also forward Esys link?

PM sent.

[Aqle82]

Originally Posted by Triplebmotorsport

Ah right, wishful thinking on my part sorry. Thank you very much for all your help thus far, it's really appreciated.

So now I should use the original FA file that I saved before doing any coding yes? And read the instructions on how to VO code ����

Hi all - new to the forums and coding. I've read through the sequence of steps and was able to do some coding.

However, having similar issue here with chassis and drivetrain error at startup. Car seems to run fine. I saved a version of my FA before I started coding and will check if any ECU's do not have a CAFD.

Shawn, can you PM me Tool32/EDIABAS to try clearing out the code?

Thanks

[stu14t]

Shawn,

what is the current version of EDIABAS ? I have 7.3.0

I ran VC and got this:

Summary:

Installation : CHANGED

Version differences : 25
**2** Files NOT found : 18
Time shifts ignored : 63

[Aqle82]

Originally Posted by Aqle82

Hi all - new to the forums and coding. I've read through the sequence of steps and was able to do some coding.

However, having similar issue here with chassis and drivetrain error at startup. Car seems to run fine. I saved a version of my FA before I started coding and will check if any ECU's do not have a CAFD.

Shawn, can you PM me Tool32/EDIABAS to try clearing out the code?

Thanks

Figured out the issue with the help of archived postings by Shawn - my DME ECU was missing CAFD. Reset and reloaded it and cleared error codes using the 'external applications - transmitter' function. Thanks Shawn!

Can you still send me EDIABAS and the latest esys/psdzdata files and guides? I will do more research/reading before making more changes.

[shawnsheridan]

Originally Posted by stu14t

Shawn,

what is the current version of EDIABAS ? I have 7.3.0

I ran VC and got this:

Summary:

Installation : CHANGED

Version differences : 25
**2** Files NOT found : 18
Time shifts ignored : 63

Same 7.3.0.

[shawnsheridan]

Originally Posted by Aqle82

Figured out the issue with the help of archived postings by Shawn - my DME ECU was missing CAFD. Reset and reloaded it and cleared error codes using the 'external applications - transmitter' function. Thanks Shawn!

Can you still send me EDIABAS and the latest esys/psdzdata files and guides? I will do more research/reading before making more changes.

PM sent.

[speedlimits.be]

Hello Schawn can you send me the latest EDIABAS tool ?

Tank you so much !

Speedlimits

[shawnsheridan]

Originally Posted by speedlimits.be

Hello Schawn can you send me the latest EDIABAS tool ?

Tank you so much !

Speedlimits

PM sent.

[speedlimits.be]

Originally Posted by shawnsheridan

PM sent.

Thanks

[tomsab0]

Perhaps somebody can help me: I have a Problem with tool32. I cannot load any prg... I have already tried with switched off firewall and also with established connection of esys; nothing works...

[Charly_HD]

Hey Shawn,

could you pls send me a link to Ediabas and Tool32?
Was not included in my E-Sys folders anymore

Thanks for your patience with all the newbies (me including) here

Greetings

[shawnsheridan]

Originally Posted by Charly_HD

Hey Shawn,

could you pls send me a link to Ediabas and Tool32?
Was not included in my E-Sys folders anymore

Thanks for your patience with all the newbies (me including) here

Greetings

EDIABAS is not included with E-Sys because it has nothing to do with E-Sys and is not used by E-Sys.

You cannot send or receive PM's yet. Send me one when you can.

[elmerzasty]

Can E-Sys be used to bleed the ABS/DSC? I mean to activate the service procedure to cycle the ABS/DSC in order to bleed it.

[shawnsheridan]

Originally Posted by elmerzasty

Can E-Sys be used to bleed the ABS/DSC? I mean to activate the service procedure to cycle the ABS/DSC in order to bleed it.

No.

[elmerzasty]

Originally Posted by shawnsheridan

No.

Thanks for the info. Do you by any chance know what software will accomplish this?

[shawnsheridan]

Originally Posted by elmerzasty

Thanks for the info. Do you by any chance know what software will accomplish this?

ITSA/D (Rheingold) and possibly INPA.