03-25-2021, 10:39 AM | #1 |
Private
29
Rep 79
Posts |
Brought some 89's back to life
Sanded Primed/painted/cleared Ceramic coated Wrapped in 275/35r 245/40f Considering adding a lil negative camber to eliminate the little bit of rubbin as I'm on close stock alignment spec All in all rides a little better than my last setup as far as the rub goes though
__________________
15? 328xi Stage2
VRSF |
03-25-2021, 10:47 AM | #2 |
Lieutenant
338
Rep 417
Posts |
I see that you had to flare the fenders quite a bit to fit that smaller offset.
Rear and front tires seems like they would rub... (no more than 1 extra passenger) This is what I miss from my 5 series: my beautiful dip dish M parallels.
__________________
'16 M4 bone stock
'13 335ix Msport BM3 stage1 - MAD FMI - FTP CP - Bilstein B4 (SOLD) '85 635csi M30 turbo race car (SOLD) |
Appreciate
1
F3032828.50 |
03-25-2021, 11:25 AM | #3 | |
Private
29
Rep 79
Posts |
Quote:
Honestly if I would have went with a gravel bashing 30 series tire I wouldn't rub at all haha You could probably still squeeze in the mpars!
__________________
15? 328xi Stage2
VRSF |
|
Appreciate
0
|
03-25-2021, 12:49 PM | #4 |
Lieutenant
338
Rep 417
Posts |
I have some E34 M5 turbines rims with R comp tires on them, they are very light rims... I wonder....
__________________
'16 M4 bone stock
'13 335ix Msport BM3 stage1 - MAD FMI - FTP CP - Bilstein B4 (SOLD) '85 635csi M30 turbo race car (SOLD) |
Appreciate
0
|
03-25-2021, 03:50 PM | #5 |
Private
29
Rep 79
Posts |
If the center bore is the same.... DO IT
__________________
15? 328xi Stage2
VRSF |
Appreciate
0
|
03-30-2021, 01:29 PM | #6 |
Lieutenant
338
Rep 417
Posts |
Yeah... they stick out quite a lot. My car is not lowered but I don't want to chance it. I will get a set of 17" and put my R comp on that.
__________________
'16 M4 bone stock
'13 335ix Msport BM3 stage1 - MAD FMI - FTP CP - Bilstein B4 (SOLD) '85 635csi M30 turbo race car (SOLD) |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|