F30POST
F30POST
2012-2015 BMW 3-Series and 4-Series Forum
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read
BMW 3-Series and 4-Series Forum (F30 / F32) | F30POST > Technical Forums > B58 Turbo Engine / Drivetrain / Exhaust Modifications > B58 Log Review Thread
GetBMWParts
Post Reply
 
Thread Tools Search this Thread
      11-20-2019, 05:56 AM   #177
kern417
Cheapskate
4442
Rep
4,992
Posts

Drives: 2018 440i |2016 340i | 2010 X5
Join Date: Aug 2016
Location: Cincinnati

iTrader: (1)

Quote:
Originally Posted by neonnblack View Post
A little late to this party.. Kern, at least for MHD any bit of boost above target will get you throttle closer, and no, you shouldn't feel it at all. My car does it frequently when reviewing logs.

My most recent log. MHD stage 2, revised 91 octane map. Max requested boost 18.1. Timing advance 9.5. 12.5 AFR

https://datazap.me/u/neonnblack/log-...ta=4-5-6-20-23
Thanks for the data. I updated the original post.

It looks like you have poor timing on cylinder 1. I have some of the same problems. Have you gapped your plugs or swapped plugs?
__________________
Quote:
Originally Posted by umizoomi View Post
As long as 3-pedals are an option, I will exercise my right to suffer the handicap and indignity of slower shifts and reaction times.
Youtube/Instagram/TikTok: @kern417
Appreciate 0
      11-20-2019, 09:18 AM   #178
neonnblack
First Lieutenant
139
Rep
302
Posts

Drives: 335i 6MT/e46 330xi
Join Date: Nov 2018
Location: Reno, NV

iTrader: (0)

Quote:
Originally Posted by kern417 View Post
Quote:
Originally Posted by neonnblack View Post
A little late to this party.. Kern, at least for MHD any bit of boost above target will get you throttle closer, and no, you shouldn't feel it at all. My car does it frequently when reviewing logs.

My most recent log. MHD stage 2, revised 91 octane map. Max requested boost 18.1. Timing advance 9.5. 12.5 AFR

https://datazap.me/u/neonnblack/log-...ta=4-5-6-20-23
Thanks for the data. I updated the original post.

It looks like you have poor timing on cylinder 1. I have some of the same problems. Have you gapped your plugs or swapped plugs?
I haven't. I will at some point. MHD seems un concerned with it, as long as larger corrections aren't on adjacent cylinders.
Appreciate 1
kern4174442.00
      11-20-2019, 09:29 AM   #179
kern417
Cheapskate
4442
Rep
4,992
Posts

Drives: 2018 440i |2016 340i | 2010 X5
Join Date: Aug 2016
Location: Cincinnati

iTrader: (1)

Quote:
Originally Posted by neonnblack View Post
I haven't. I will at some point. MHD seems un concerned with it, as long as larger corrections aren't on adjacent cylinders.
Yeah, I'm curious. I think it's interesting because usually it's the cylinder that's farthest away from the throttle body getting timing pull, not the closest. I wonder if air is having difficulty navigating around that sharp turn.
__________________
Quote:
Originally Posted by umizoomi View Post
As long as 3-pedals are an option, I will exercise my right to suffer the handicap and indignity of slower shifts and reaction times.
Youtube/Instagram/TikTok: @kern417
Appreciate 0
      11-20-2019, 04:46 PM   #180
GT500R
Major
798
Rep
1,219
Posts

Drives: BMW X3M
Join Date: May 2018
Location: NE

iTrader: (0)

Quote:
Originally Posted by kern417 View Post
Thanks for the data. I updated the original post.

It looks like you have poor timing on cylinder 1. I have some of the same problems. Have you gapped your plugs or swapped plugs?
And 4?
__________________
X3M Alpine White - SOLD
Fastest Tune Only Record - Mission Performance
10.84@127.43 / +1912 DA NH Dragway |
10.6@130 Dragy / +820 DA The Streets |
NOW: Tesla Model Y Performance
Appreciate 1
kern4174442.00
      11-20-2019, 06:30 PM   #181
neonnblack
First Lieutenant
139
Rep
302
Posts

Drives: 335i 6MT/e46 330xi
Join Date: Nov 2018
Location: Reno, NV

iTrader: (0)

Also don't forget im running acn91 fuel and it's shit. could have a bit of a factor.
Appreciate 1
kern4174442.00
      11-21-2019, 02:13 AM   #182
enemigo13
Lieutenant
247
Rep
500
Posts

Drives: F32 LCI 440xi citrineblack
Join Date: Nov 2015
Location: LT

iTrader: (0)

everybody has timing corrections on 1st cylinder. you need to tune it out with a bit rising knock detection threshold, then it is ok.

Quote:
Originally Posted by kern417 View Post
Thanks for the data. I updated the original post.

It looks like you have poor timing on cylinder 1. I have some of the same problems. Have you gapped your plugs or swapped plugs?
Appreciate 2
kern4174442.00
      11-21-2019, 06:04 AM   #183
kern417
Cheapskate
4442
Rep
4,992
Posts

Drives: 2018 440i |2016 340i | 2010 X5
Join Date: Aug 2016
Location: Cincinnati

iTrader: (1)

Quote:
Originally Posted by GT500R View Post
And 4?
Yep 4 too, but it looked like it started to catch up by the time it got to redline. Whereas Cyl 1 couldn't go above 4°-5°

Quote:
Originally Posted by neonnblack View Post
Also don't forget im running acn91 fuel and it's shit. could have a bit of a factor.
Yeah, definitely could be. Does MHD have an ACN tune?

Quote:
Originally Posted by enemigo13 View Post
everybody has timing corrections on 1st cylinder. you need to tune it out with a bit rising knock detection threshold, then it is ok.
From what I see it's 50/50. Some people have clean timing across the board. I just want to know why cyl 1 tends to pull timing and I'll feel better about it.
__________________
Quote:
Originally Posted by umizoomi View Post
As long as 3-pedals are an option, I will exercise my right to suffer the handicap and indignity of slower shifts and reaction times.
Youtube/Instagram/TikTok: @kern417
Appreciate 0
      11-21-2019, 10:43 AM   #184
neonnblack
First Lieutenant
139
Rep
302
Posts

Drives: 335i 6MT/e46 330xi
Join Date: Nov 2018
Location: Reno, NV

iTrader: (0)

MHD doesn't have a labeled acn91. there most recent b58 update changed their regular 91 map to work with the fuel better though.

i.e. before the update i had to use octane booster and with the update i no longer need it.
Appreciate 1
kern4174442.00
      11-23-2019, 10:17 AM   #185
Boomsatty
New Member
Boomsatty's Avatar
6
Rep
24
Posts

Drives: 2021 M4
Join Date: Feb 2014
Location: MN

iTrader: (0)

Here's one

Take a look and see what you think. MHD stage 2 on stock DP and intake. 93oct

https://datazap.me/u/boomscatty/stag...25-26-27-28-29
https://datazap.me/u/boomscatty/mhd-...25-26-27-28-29
https://datazap.me/u/boomscatty/mhd-...25-26-27-28-29
__________________
2021 M4 6M
Sold - 2016 340I M Sport MHD, VRSF DP
Sold - F80 M3 FBO
Sold - 2016 BMW I8
Sold - 2013 535i M Sport

Last edited by Boomsatty; 11-23-2019 at 03:28 PM..
Appreciate 2
kern4174442.00
OzBMR574.50
      11-23-2019, 07:57 PM   #186
Boomsatty
New Member
Boomsatty's Avatar
6
Rep
24
Posts

Drives: 2021 M4
Join Date: Feb 2014
Location: MN

iTrader: (0)

Quote:
Originally Posted by kern417 View Post
So one of the reasons I made this thread is being shown. I'm having trouble seeing the difference between Stage 1 and Stage 2. Are there any other stage 2 logs out there? I thought it had a higher boost target. And I don't really see how it's taking advantage of a downpipe or why it's needed.
I just posted 3 Stage 2 MHD logs here.
__________________
2021 M4 6M
Sold - 2016 340I M Sport MHD, VRSF DP
Sold - F80 M3 FBO
Sold - 2016 BMW I8
Sold - 2013 535i M Sport
Appreciate 0
      11-23-2019, 08:21 PM   #187
kern417
Cheapskate
4442
Rep
4,992
Posts

Drives: 2018 440i |2016 340i | 2010 X5
Join Date: Aug 2016
Location: Cincinnati

iTrader: (1)

Quote:
Originally Posted by Boomsatty View Post
thank for posting. it looks like yours is only targetting 16.5-17psi compared to others that target 18+. But everything looks good compared to target values. I wonder why yours has a lower boost target? I don't think it would have anything to do with the downpipe. Did you run it for a while and let everything adapt?
__________________
Quote:
Originally Posted by umizoomi View Post
As long as 3-pedals are an option, I will exercise my right to suffer the handicap and indignity of slower shifts and reaction times.
Youtube/Instagram/TikTok: @kern417
Appreciate 1
      11-23-2019, 08:57 PM   #188
kern417
Cheapskate
4442
Rep
4,992
Posts

Drives: 2018 440i |2016 340i | 2010 X5
Join Date: Aug 2016
Location: Cincinnati

iTrader: (1)

So I had to get my Bootmod3 account reset, and it ended up erasing all of my old logs. Even the links in here don't work anymore. That + enjoying the datazap interface has motivated me to start backing up my logs on there. For any other BM3 users, I highly recommend it. Export the CSV, upload to datazap, and it does everything for you.

This are my stock log. Just reposting for future reference.
https://datazap.me/u/kern4179/stock-191109?log=0&data=3

Also, if you guys think it would be helpful to copy a link of a clean log under each tune, let me know.
__________________
Quote:
Originally Posted by umizoomi View Post
As long as 3-pedals are an option, I will exercise my right to suffer the handicap and indignity of slower shifts and reaction times.
Youtube/Instagram/TikTok: @kern417
Appreciate 0
      11-23-2019, 09:41 PM   #189
Boomsatty
New Member
Boomsatty's Avatar
6
Rep
24
Posts

Drives: 2021 M4
Join Date: Feb 2014
Location: MN

iTrader: (0)

Quote:
Originally Posted by kern417 View Post
thank for posting. it looks like yours is only targetting 16.5-17psi compared to others that target 18+. But everything looks good compared to target values. I wonder why yours has a lower boost target? I don't think it would have anything to do with the downpipe. Did you run it for a while and let everything adapt?
I’ve had it in the car for a couple days now but haven’t done many WOT pulls yet. How many pulls or how much time does it usually take to get in the zone?
Appreciate 0
      11-23-2019, 10:47 PM   #190
kern417
Cheapskate
4442
Rep
4,992
Posts

Drives: 2018 440i |2016 340i | 2010 X5
Join Date: Aug 2016
Location: Cincinnati

iTrader: (1)

Quote:
Originally Posted by Boomsatty View Post
I’ve had it in the car for a couple days now but haven’t done many WOT pulls yet. How many pulls or how much time does it usually take to get in the zone?
Just 2-3
__________________
Quote:
Originally Posted by umizoomi View Post
As long as 3-pedals are an option, I will exercise my right to suffer the handicap and indignity of slower shifts and reaction times.
Youtube/Instagram/TikTok: @kern417
Appreciate 1
      11-23-2019, 11:40 PM   #191
OzBMR
Captain
OzBMR's Avatar
Australia
575
Rep
585
Posts

Drives: BMW M140i
Join Date: Aug 2019
Location: Brisbane, Australia

iTrader: (0)

Quote:
Originally Posted by kern417 View Post
thank for posting. it looks like yours is only targetting 16.5-17psi compared to others that target 18+. But everything looks good compared to target values. I wonder why yours has a lower boost target? I don't think it would have anything to do with the downpipe. Did you run it for a while and let everything adapt?
Low ambient temps close to freezing likely explain the lower boost levels. Engine management is Load/Torque based. Load target looks about right for a 93 map at 180 peak tapering to 160 up top. Cold air is more dense achieving cylinder fill target at a lower boost level.

Agree, everything looks good in the logs.
__________________
Tesla Model 3 Performance 0 - 60mph 3.1s
M140i LCI Mineral Grey
Dorch Stage 2 HPFP, CG Precision DS-1, XHP, MHD Stage 2 HPFP E30 @ E42 100 - 200 6.96s
Quarter mile 10.93@127mph
Appreciate 1
kern4174442.00
      11-23-2019, 11:43 PM   #192
OzBMR
Captain
OzBMR's Avatar
Australia
575
Rep
585
Posts

Drives: BMW M140i
Join Date: Aug 2019
Location: Brisbane, Australia

iTrader: (0)

Quote:
Originally Posted by kern417 View Post
So I had to get my Bootmod3 account reset, and it ended up erasing all of my old logs. Even the links in here don't work anymore. That + enjoying the datazap interface has motivated me to start backing up my logs on there. For any other BM3 users, I highly recommend it. Export the CSV, upload to datazap, and it does everything for you.

This are my stock log. Just reposting for future reference.
https://datazap.me/u/kern4179/stock-191109?log=0&data=3

Also, if you guys think it would be helpful to copy a link of a clean log under each tune, let me know.
That sucks.

4th gear runs would be good, Load targets are typically lower in the first three gears.
__________________
Tesla Model 3 Performance 0 - 60mph 3.1s
M140i LCI Mineral Grey
Dorch Stage 2 HPFP, CG Precision DS-1, XHP, MHD Stage 2 HPFP E30 @ E42 100 - 200 6.96s
Quarter mile 10.93@127mph
Appreciate 0
      11-23-2019, 11:55 PM   #193
OzBMR
Captain
OzBMR's Avatar
Australia
575
Rep
585
Posts

Drives: BMW M140i
Join Date: Aug 2019
Location: Brisbane, Australia

iTrader: (0)

Quote:
Originally Posted by neonnblack View Post
A little late to this party.. Kern, at least for MHD any bit of boost above target will get you throttle closer, and no, you shouldn't feel it at all. My car does it frequently when reviewing logs.

My most recent log. MHD stage 2, revised 91 octane map. Max requested boost 18.1. Timing advance 9.5. 12.5 AFR

https://datazap.me/u/neonnblack/log-...ta=4-5-6-20-23
Looks good. It looks the same as the MHD Stage 2 93 octane Load target profile just lower timing due to reduced octane.
__________________
Tesla Model 3 Performance 0 - 60mph 3.1s
M140i LCI Mineral Grey
Dorch Stage 2 HPFP, CG Precision DS-1, XHP, MHD Stage 2 HPFP E30 @ E42 100 - 200 6.96s
Quarter mile 10.93@127mph
Appreciate 1
      11-24-2019, 09:18 AM   #194
Boomsatty
New Member
Boomsatty's Avatar
6
Rep
24
Posts

Drives: 2021 M4
Join Date: Feb 2014
Location: MN

iTrader: (0)

Quote:
Originally Posted by OzBMR View Post
Low ambient temps close to freezing likely explain the lower boost levels. Engine management is Load/Torque based. Load target looks about right for a 93 map at 180 peak tapering to 160 up top. Cold air is more dense achieving cylinder fill target at a lower boost level.

Agree, everything looks good in the logs.
Thanks for that! Timing and everything look good? Think I should replace/re-gap plugs?
Appreciate 0
      11-24-2019, 10:25 AM   #195
kern417
Cheapskate
4442
Rep
4,992
Posts

Drives: 2018 440i |2016 340i | 2010 X5
Join Date: Aug 2016
Location: Cincinnati

iTrader: (1)

Quote:
Originally Posted by Boomsatty View Post
Thanks for that! Timing and everything look good? Think I should replace/re-gap plugs?
It could help. Your cylinder 1 is lagging behind but a lot of people tend to have that issue. Regapping mine helped, but didn't eliminate the issue.
__________________
Quote:
Originally Posted by umizoomi View Post
As long as 3-pedals are an option, I will exercise my right to suffer the handicap and indignity of slower shifts and reaction times.
Youtube/Instagram/TikTok: @kern417
Appreciate 0
      11-24-2019, 03:03 PM   #196
Boomsatty
New Member
Boomsatty's Avatar
6
Rep
24
Posts

Drives: 2021 M4
Join Date: Feb 2014
Location: MN

iTrader: (0)

Quote:
Originally Posted by kern417 View Post
It could help. Your cylinder 1 is lagging behind but a lot of people tend to have that issue. Regapping mine helped, but didn't eliminate the issue.
Cool. What did you gap to? 22?
Appreciate 0
      11-25-2019, 06:24 AM   #197
kern417
Cheapskate
4442
Rep
4,992
Posts

Drives: 2018 440i |2016 340i | 2010 X5
Join Date: Aug 2016
Location: Cincinnati

iTrader: (1)

Quote:
Originally Posted by Boomsatty View Post
Cool. What did you gap to? 22?
Yep gapped the stock plugs to 0.022-0.024. I was good until I updated to BM3's v2.0 tune, then i started getting some knock detected. Regapping got rid of the knock, but I still have lower timing on cylinder 1. It tends to catch up by redline, but in the mid-rpm there's some pull.
__________________
Quote:
Originally Posted by umizoomi View Post
As long as 3-pedals are an option, I will exercise my right to suffer the handicap and indignity of slower shifts and reaction times.
Youtube/Instagram/TikTok: @kern417
Appreciate 1
      11-25-2019, 07:13 AM   #198
bacon_45
Private
42
Rep
94
Posts

Drives: 2018 340i BM3 FBO
Join Date: Feb 2017
Location: San Diego, CA

iTrader: (0)

http://www.bootmod3.net/log?id=5ddbc833c090c670d017873b
Hey guys, here is my e30 stage 2 log I did! its a long one for best results, thank you!
Appreciate 1
kern4174442.00
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 04:52 AM.




f30post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST