[cesarortiz23]

Hello you guys

Can you code the rear fog lights to work with the bimmercode app

And if you can what's the steps

I already modded the switch etc.

But now just need to code the car

[ooshnoo]

Contact the author of BimmerCode and ask him.

[paimon.soror]

https://www.normalexception.net/BMW-...rear-foglight/

shameless plug but all the data you need is there

[cesarortiz23]

Originally Posted by paimon.soror

https://www.normalexception.net/BMW-...rear-foglight/

shameless plug but all the data you need is there

so I looked it up on bimmercode app
And it seems to be there

But idk what exactly you change


The values on the picture is what is showing already on the bimmercode app

That's is what I see on my app

On the default setting

L output off
R output off


Or what exactly am I suppose to change them to

[paimon.soror]

ah sorry ill have to fix that formatting for mobile.

ECU	        Module  Option	                        Default	        New Value
FEM_BODY	3060	NSL_Verbaut	                nicht_verbaut	Verbaut
REM	        3063	Mapping_Nebelschlussl_L_output	off	        nsl_l
REM	        3063	Mapping_Nebelschlussl_R_output	off	        nsl_l

[cesarortiz23]

Originally Posted by paimon.soror

ah sorry ill have to fix that formatting for mobile.

Perfect

Now it worked lol


Thanks dude

[cesarortiz23]

Originally Posted by paimon.soror

ah sorry ill have to fix that formatting for mobile.

ECU	        Module  Option	                        Default	        New Value
FEM_BODY	3060	NSL_Verbaut	                nicht_verbaut	Verbaut
REM	        3063	Mapping_Nebelschlussl_L_output	off	        nsl_l
REM	        3063	Mapping_Nebelschlussl_R_output	off	        nsl_l

Hey boss one last thing maybe you can help me out with this


I am installing led reverse lights tomorrow I obviously need to code that they are now going to be leds

But if the bulbs flicker what can I code or what do I need to code to not have it flicker on bimmercode app


Thanks for the help in advance

[paimon.soror]

sorry bud, that one i dont have the answer for

There is a coding thread floating around here, i dont have the link handy, but def ask in there.

[oranga]

I installed LED bulbs everywhere and used Bimmercode to update coding. The bulb options should be available on the main page of the Rear Electronic Module. Just toggle the warm + cold checks to off, and the lamp types to LED.

[cesarortiz23]

Originally Posted by oranga

I installed LED bulbs everywhere and used Bimmercode to update coding. The bulb options should be available on the main page of the Rear Electronic Module. Just toggle the warm + cold checks to off, and the lamp types to LED.

Thanks

[cesarortiz23]

video in motion question


Do I have to code something to watch videos through usb


Right now I can only watch dvds


can I watch music videos from a usb


I have the cic headunit ...

[Sunny_TK]

i believe that dvd's is your only option that will work. I tried coding this as

[B530e]

Originally Posted by paimon.soror

ah sorry ill have to fix that formatting for mobile.

ECU	        Module  Option	                        Default	        New Value
FEM_BODY	3060	NSL_Verbaut	                nicht_verbaut	Verbaut
REM	        3063	Mapping_Nebelschlussl_L_output	off	        nsl_l
REM	        3063	Mapping_Nebelschlussl_R_output	off	        nsl_l

Good Evening, I tried to code my rear fogs with the information above and was unsuccessful. I was able to mod the button and activate the indicator light however that's all that worked. Any idea why?

I drive a 2018 430i Gran Coupe

[KlEaR]

Instead of starting a new thread, I just coded my m4 and did the button modification and i have the rear fog light indicator on the dash when the button is activated, but the rear fogs do not turn on in the tail light. Anyone have suggestions? 2018 M4
The coding is correct, went over it a few times to verify. TIA

[cjn]

Originally Posted by KlEaR

Instead of starting a new thread, I just coded my m4 and did the button modification and i have the rear fog light indicator on the dash when the button is activated, but the rear fogs do not turn on in the tail light. Anyone have suggestions? 2018 M4
The coding is correct, went over it a few times to verify. TIA

Another setting to check is
REM / 3063
MAPPING_NEBELSCHLUSSL_L_FUNCTION
MAPPING_NEBELSCHLUSSL_R_FUNCTION
These should both be set to 0E (fog light), which is the default value
Also, silly question, is there actually a working bulb installed on each side?
Your rear lights are LED but I think they still use the H21W halogen bulb for the fogs. Check there's not just an empty socket.

[1QuikWS6]

Originally Posted by KlEaR

Instead of starting a new thread, I just coded my m4 and did the button modification and i have the rear fog light indicator on the dash when the button is activated, but the rear fogs do not turn on in the tail light. Anyone have suggestions? 2018 M4
The coding is correct, went over it a few times to verify. TIA

You should have asked this or did a b4 buying or doing any of the work regarding rear fogs

Rear fogs do not work on the LCI tails

Been there done same as you early on. Wasted $$ on a new OEM headlight switch sold it on the forum to recoup

[cjn]

Originally Posted by 1QuikWS6

You should have asked this or did a b4 buying or doing any of the work regarding rear fogs

Rear fogs do not work on the LCI tails

Been there done same as you early on. Wasted $$ on a new OEM headlight switch sold it on the forum to recoup

I had mistakenly assumed that the 2018 F82 would have the same setup as the 2018 F30. Not so, the F30 still has the H21W for the fog light, while the F82 is all-LED. Since this applies to the Euro models as well as the US, and the former must have a fog light available somehow, it may well be that the US F82 can be coded for this function.

[1QuikWS6]

In my case I have 2015 F32 - retrofitted to the US LCI tails (same as F82 US LCI tails) and the professional well known coder from this forum that I was working with to do remote coding stated there is no way to code these specific tails for rear fogs...

[B530e]

Originally Posted by 1QuikWS6

In my case I have 2015 F32 - retrofitted to the US LCI tails (same as F82 US LCI tails) and the professional well known coder from this forum that I was working with to do remote coding stated there is no way to code these specific tails for rear fogs...

I was able to figure it out. The rear fog lights use the same lights as the Rear Brakeforce Lights which are the turn signals. I noticed BMW moved the Brakeforce lights in LCI models when I read the manual. I’ll post pics later

[rlmesq]

Originally Posted by 1QuikWS6

Rear fogs do not work on the LCI tails

Too bad you sold the switch. Rear fogs DO work on LCI taillights, but the coding for 4 series is different from the 3 series.

https://f30.bimmerpost.com/forums/sh....php?t=1410454

Edit: I noticed that yours are retrofitted to a pre-LCI car. That may be different.

[thakk]

Hi Guys,

Necroing an old thread, but I jsut got my Euroswitch and tried setting up my rear fogs.

My left one works fine, but my right one activated my reverse light and not the fog light.
I'm not sure if it is a coding issue and I cannot read german, so don't know what I should be looking at in expert mode of bimmercode on android.

Here are a couple of pictures.

[thakk]

So to reply to my own post, I restored the REM module setting and then reapplied the coding for the rear fogs. It worked this time without issue.

Thank you for the code. It worked well.