09-19-2020, 08:36 PM | #1 |
Private First Class
35
Rep 172
Posts |
Wheel speed sensor
Hi,
I have the chassis stabilization , abs, cel warning lights, which is typical of my wheel speed sensor. Bought the following part number 34526884423, and after changing the sensors, - the error didn’t go away. In fact, I got the airbag malfunction error as well now - the steering became heavy (Was normal before I replace) - Automatic trunk does not work (can still open by force) - retractable spoiler deployed and couldn’t get it down I bought my own parts and the workshop installed for me. They suspect I got the wrong part. Has anyone faced similar experience, and managed to get it resolved? What would be the next troubleshoot to do? Thanks! |
09-19-2020, 09:07 PM | #2 |
Lieutenant General
8170
Rep 15,966
Posts |
The error won't go away because you changed the sensor. You have to clear it with an OBD diagnostic and repair tool. You might not have had to replace it. I got the entire set of warnings associated with ABS sensor failure. I used my Foxwell NT510 to diagnose the problem, clear the codes, and then function test the sensors. They were all fine. Two years later the problem never returned.
|
Appreciate
1
angelforce7.50 |
12-10-2023, 10:11 AM | #6 |
Registered
0
Rep 1
Posts |
Hey buddy! I am hoping you are still on these forums
But i having the literally exact issue you did with swapping wheel sensor And the steering wheel getting heavy with air bag light and i cannot find A single thing online about it and was wondering how you got it fixed? THANK YOU IN ADVANCE! |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|