OFFICIAL Slammed/Stanced (F30/F32) Thread

OEM+Alpine · 10-11-2020, 09:32 PM

Quote:

Originally Posted by Alpine_F30

Quote:

Originally Posted by Kefka

More pics?
I have the same specs for rears
19x9.5 et33 planning to mount them into 265/35 tires...but not sure how it will look in F32 n55 car.

Should look good, I may add a little spacer (~5mm), especially after I get rid of these bulky runflats, wish I went with a 10", but was worried +25 could be a problem.

What are your wheel ans tire specs? I assume the fronts are 8.5". Also is your camber in spec? Are your fenders rolled?

philip_pino · 10-14-2020, 12:53 AM

ST XA coilovers w/ ground control plates. Waiting on megan rear camber arms to go lower and tuck tire. Will get wheels rebuilt sometime in the future as I'm a big fan of stepped lips

M3EW · 10-19-2020, 07:23 PM

Anyone here running this fitment on their f30 sedan? I'm lowered on BC coils. Wondering how well this fits. I've seen the fronts clear pretty well, but I'm worried about the rear. Most 19x10 setups I seen were et40 to et45

19x9.5 et23 front
19x10 et34 rear

265/30/19
275/30/19

jeremyuhh · 10-20-2020, 03:50 AM

Cut springs

Alpine-F80 · 10-25-2020, 07:21 AM

Quote:

Originally Posted by BoostedCoupe

What are your wheel ans tire specs? I assume the fronts are 8.5". Also is your camber in spec? Are your fenders rolled?

I'm running -2 up front, -1.5 in rear, mostly all natural from lowering the car and dialed in as a "performance alignment" at a tuner shop.

j2nicee · 11-10-2020, 04:12 PM

Hey guys, new to the F3X platform and the vehicle I purchased came with the 361m style wheels, they are 20x8 et36 and 20x8.5 et47, I know these are not aggressive in the slightest but I like the style and was wondering what the widest tire I could run would be? Im on KW coils and want to be as flush as possible and don't really care to do any fender mods. Thanks for the help in advance!

aps · 11-12-2020, 02:29 PM

Quote:

Originally Posted by j2nicee

Hey guys, new to the F3X platform and the vehicle I purchased came with the 361m style wheels, they are 20x8 et36 and 20x8.5 et47, I know these are not aggressive in the slightest but I like the style and was wondering what the widest tire I could run would be? Im on KW coils and want to be as flush as possible and don't really care to do any fender mods. Thanks for the help in advance!

On an 8.5" wheel the widest tire that really makes sense is a 255. If you want to be flush, you are going to need spacers. Like thick spacers. Those wheels are going to sit pretty far in.

J555 · 11-12-2020, 03:36 PM

Correct, maximum width is 245 front and 255 rear. For flush fitment, you need to add spacers - 12 mm front and 15-18 mm rear.

j2nicee · 11-12-2020, 04:18 PM

Quote:

Originally Posted by J555

Correct, maximum width is 245 front and 255 rear. For flush fitment, you need to add spacers - 12 mm front and 15-18 mm rear.

245/35 and 255/30?

TheFanatic · 11-13-2020, 09:18 AM

Quote:

Originally Posted by j2nicee

245/35 and 255/30?

I run 255/35 square +33 offset.

Johnny250 · 11-17-2020, 06:24 PM

j2nicee · 11-22-2020, 03:01 PM

Decided to ditch the stocks and build custom wheels instead. Plan on doing the following:

19x9.5 et30 with a 245/35/19
19x10.5 et40 with a 275/30/19

How does that sound for a meaty flush fitment? Not looking to roll or pull fenders, already lowered on KW.

kern417 · 11-23-2020, 08:05 AM

Quote:

Originally Posted by j2nicee

Decided to ditch the stocks and build custom wheels instead. Plan on doing the following:

19x9.5 et30 with a 245/35/19
19x10.5 et40 with a 275/30/19

How does that sound for a meaty flush fitment? Not looking to roll or pull fenders, already lowered on KW.

I had the same offsets/tire sizes, just narrower wheels. It will sit really well once lowered. You'll need camber plates up front to prevent rub depending on how low you go.

j2nicee · 11-23-2020, 08:25 AM

Quote:

Originally Posted by kern417

I had the same offsets/tire sizes, just narrower wheels. It will sit really well once lowered. You'll need camber plates up front to prevent rub depending on how low you go.

Im thinking about going with a 9/10 set up instead just to be safe.

Waltabeast · 11-28-2020, 11:48 PM

New BC forged wheels.
19x9.5 +33
19x10.5 +38

Lowered on KW SC maxed out.

not.ramos · 12-03-2020, 10:37 PM

Here are my setups from 2020 alone.

BBS's for sale if anyone is interested! Perfect spec for F3x's (https://f30.bimmerpost.com/forums/sh....php?t=1777492)

not.ramos · 12-03-2020, 10:43 PM

Quote:

Originally Posted by F30Hayden

Tried to look everywhere I can and could only find 2 people running this wide in front online. Does anyone know what offset or experience to clear the strut? Looking to get aggressive flush fitment static and want the concavity that the 10" wide offers. Any help would be much appreciated!

19x10 +15 with a 225/35/19. I would only run this up front if you ran a good set of stiff coils with camber plates, you would need to run max camber in order to avoid clearance issues.

not.ramos · 12-03-2020, 10:51 PM

Quote:

Originally Posted by SLVR_F30

Anyone here running this fitment on their f30 sedan? I'm lowered on BC coils. Wondering how well this fits. I've seen the fronts clear pretty well, but I'm worried about the rear. Most 19x10 setups I seen were et40 to et45

19x9.5 et23 front
19x10 et34 rear

265/30/19
275/30/19

You won't be able to run that tire up front. I would downsize to:

19x9 +30 245/35

19x10 +35 265/35

This is probably a more a practical setup (I highly recommend getting coilovers with camber plates and messing with the camber to avoid messing up your fenders, F3x's have the weakest fenders I have dealt with)

CrimsonXV · 12-04-2020, 02:04 PM

KendrickOak Could you post a couple of pictures of your car not aired out, like at driving height. I'm planning to do a similar super deep concave setup but I'll be static on coils with not as an aggressive drop (probably gonna be showing at least 2 fingers width of tire sidewall). So I wanna see how that'll look.

Also if you could post your complete specs (sizes, offsets, tire sizes, camber, fender mods). I've found pieces of your setup throughout this thread but it'll be helpful for me and others to see it all posted in one place.

Please and thank you, your setup looks so sick!!

KendrickOak · 12-04-2020, 02:18 PM

Quote:

Originally Posted by CrimsonXV

KendrickOak Could you post a couple of pictures of your car not aired out, like at driving height. I'm planning to do a similar super deep concave setup but I'll be static on coils with not as an aggressive drop (probably gonna be showing at least 2 fingers width of tire sidewall). So I wanna see how that'll look.

Also if you could post your complete specs (sizes, offsets, tire sizes, camber, fender mods). I've found pieces of your setup throughout this thread but it'll be helpful for me and others to see it all posted in one place.

Please and thank you, your setup looks so sick!!

Quote:

Originally Posted by CrimsonXV

KendrickOak Could you post a couple of pictures of your car not aired out, like at driving height. I'm planning to do a similar super deep concave setup but I'll be static on coils with not as an aggressive drop (probably gonna be showing at least 2 fingers width of tire sidewall). So I wanna see how that'll look.

Also if you could post your complete specs (sizes, offsets, tire sizes, camber, fender mods). I've found pieces of your setup throughout this thread but it'll be helpful for me and others to see it all posted in one place.

Please and thank you, your setup looks so sick!!

Will do bro, I'll get you a pic of my drive height but it's still super low

J555 · 12-05-2020, 05:58 AM

Spotted this in local media...

Canadared · 12-10-2020, 05:28 AM

I plan on getting wheels rebuilt, 19x9.5 +30, 19x10.5 +40 with some camber. Rub yay or nay?

10-14-2020, 12:53 AM	#1784
philip_pino New Member 9 Rep 17 Posts Drives: e46 m3, f30 328i Join Date: Jul 2020 Location: San Diego iTrader: (1)	ST XA coilovers w/ ground control plates. Waiting on megan rear camber arms to go lower and tuck tire. Will get wheels rebuilt sometime in the future as I'm a big fan of stepped lips Attached Images
	Appreciate 2 theEZV178.00 Stlthnmrdrd156.50 Quote

10-19-2020, 07:23 PM	#1785
M3EW Lieutenant 221 Rep 528 Posts Drives: F80 M3 Join Date: Aug 2017 Location: California iTrader: (3)	Anyone here running this fitment on their f30 sedan? I'm lowered on BC coils. Wondering how well this fits. I've seen the fronts clear pretty well, but I'm worried about the rear. Most 19x10 setups I seen were et40 to et45 19x9.5 et23 front 19x10 et34 rear 265/30/19 275/30/19 __________________ @cheungkyf80
	Appreciate 0 Quote

10-20-2020, 03:50 AM	#1786
jeremyuhh Captain 465 Rep 837 Posts Drives: 2015 M3 Join Date: Feb 2016 Location: Canyon Country, CA iTrader: (12)	Cut springs Attached Images
	Appreciate 10 kern4174445.00 aps335.50 philip_pino9.00 claytonap178.50 Alpine-F80200.50 Pussiwillow521.00 not.ramos209.50 Silverlining_m21730.00 BMW BRAD202.50 WordOnRoad313.00 Quote

11-10-2020, 04:12 PM	#1788
j2nicee Second Lieutenant 55 Rep 235 Posts Drives: 2009 E92 Join Date: Jan 2015 Location: NC iTrader: (1)	Hey guys, new to the F3X platform and the vehicle I purchased came with the 361m style wheels, they are 20x8 et36 and 20x8.5 et47, I know these are not aggressive in the slightest but I like the style and was wondering what the widest tire I could run would be? Im on KW coils and want to be as flush as possible and don't really care to do any fender mods. Thanks for the help in advance!
	Appreciate 0 Quote

11-12-2020, 03:36 PM	#1790
J555 Captain 569 Rep 611 Posts Drives: F31 LCI 340iX Join Date: Mar 2020 Location: Europe iTrader: (0)	Correct, maximum width is 245 front and 255 rear. For flush fitment, you need to add spacers - 12 mm front and 15-18 mm rear.
	Appreciate 1 j2nicee55.00 Quote

11-17-2020, 06:24 PM	#1793
Johnny250 Colonel 1043 Rep 2,152 Posts Drives: 328d Wagon Join Date: Apr 2012 Location: Los Angeles iTrader: (38)	__________________ EBII F80 M3 Build Here EBII F31 328d Build Here
	Appreciate 12 kern4174445.00 Stlthnmrdrd156.50 Bt130915.00 itsrichierich186.50 philip_pino9.00 claytonap178.50 F30_SixSpeed1170.50 not.ramos209.50 Alpine-F80200.50 homanmaster95.00 BMW BRAD202.50 obzen188.00 Quote

11-22-2020, 03:01 PM	#1794
j2nicee Second Lieutenant 55 Rep 235 Posts Drives: 2009 E92 Join Date: Jan 2015 Location: NC iTrader: (1)	Decided to ditch the stocks and build custom wheels instead. Plan on doing the following: 19x9.5 et30 with a 245/35/19 19x10.5 et40 with a 275/30/19 How does that sound for a meaty flush fitment? Not looking to roll or pull fenders, already lowered on KW. Last edited by j2nicee; 11-22-2020 at 03:20 PM..
	Appreciate 0 Quote

11-28-2020, 11:48 PM	#1797
Waltabeast Private First Class 72 Rep 145 Posts Drives: 2016 435i M sport Join Date: Aug 2018 Location: Fontana, California iTrader: (0)	New BC forged wheels. 19x9.5 +33 19x10.5 +38 Lowered on KW SC maxed out. Attached Images
	Appreciate 0 Quote

12-03-2020, 10:37 PM	#1798
not.ramos Enthusiast 210 Rep 367 Posts Drives: 6MT M2C Join Date: Feb 2017 Location: East Bay Area, California iTrader: (0)	Here are my setups from 2020 alone. BBS's for sale if anyone is interested! Perfect spec for F3x's (https://f30.bimmerpost.com/forums/sh....php?t=1777492) Attached Images __________________ IG: brandon_rramos ULTRA MOTORSPORTS
	Appreciate 4 kern4174445.00 BMW BRAD202.50 WordOnRoad313.00 Tru Vic339.50 Quote

12-04-2020, 02:04 PM	#1801
CrimsonXV Private First Class 27 Rep 122 Posts Drives: 435i 6mt, 325Ci 5mt, 87' K100 Join Date: Mar 2010 Location: Kansas City iTrader: (0)	KendrickOak Could you post a couple of pictures of your car not aired out, like at driving height. I'm planning to do a similar super deep concave setup but I'll be static on coils with not as an aggressive drop (probably gonna be showing at least 2 fingers width of tire sidewall). So I wanna see how that'll look. Also if you could post your complete specs (sizes, offsets, tire sizes, camber, fender mods). I've found pieces of your setup throughout this thread but it'll be helpful for me and others to see it all posted in one place. Please and thank you, your setup looks so sick!!
	Appreciate 0 Quote

12-05-2020, 05:58 AM	#1803
J555 Captain 569 Rep 611 Posts Drives: F31 LCI 340iX Join Date: Mar 2020 Location: Europe iTrader: (0)	Spotted this in local media... Attached Images
	Appreciate 6 Alpine-F80200.50 Stlthnmrdrd156.50 saga boy299.50 Fitment Industries0.00 BMW BRAD202.50 Tru Vic339.50 Quote

12-10-2020, 05:28 AM	#1804
Canadared Private 54 Rep 59 Posts Drives: 2012 BMW 335i F30 Join Date: Sep 2019 Location: London iTrader: (0)	I plan on getting wheels rebuilt, 19x9.5 +30, 19x10.5 +40 with some camber. Rub yay or nay? Last edited by Canadared; 12-13-2020 at 12:11 PM..
	Appreciate 0 Quote