[Martin99]

hi.
i want to deactivate adaptive headlight becouse i change my front lamps to non adaptive.
i tried to remove 524 from fa and code fem but when i tryied to code fem there are showing 2 faults:
Abort!
Asynchrone programming failed! [C049]
task extension configuration missing in container - maybe the template is too old [1906]

im using a e-sys 3.25.3 installed 3 years ago
Do i need some newer PZD ? ive got 20.03.540
thanks for help

[shawnsheridan]

Originally Posted by MatrixRev

Hi Shawn,

Can u share a link to psdzdata 4.46.1x.

Thanks

Originally Posted by alg222

BMW F34 GT
I step (current): F020-23-07-530

What version of psdz/esys should I be using?
I have psdz 4.45.10 and it only shows me CAF options up to F020-21-XXXX

Thanks!!

Originally Posted by Martin99

hi.
i want to deactivate adaptive headlight becouse i change my front lamps to non adaptive.
i tried to remove 524 from fa and code fem but when i tryied to code fem there are showing 2 faults:
Abort!
Asynchrone programming failed! [C049]
task extension configuration missing in container - maybe the template is too old [1906]

im using a e-sys 3.25.3 installed 3 years ago
Do i need some newer PZD ? ive got 20.03.540
thanks for help

PM's sent.

[costy.colceag]

Hello
Do you guys know an e-Sys psdzdata full torrent?
i got something from Mega but is not working it says CAFD file missing

thanks

[shawnsheridan]

Originally Posted by costy.colceag

Hello
Do you guys know an e-Sys psdzdata full torrent?
i got something from Mega but is not working it says CAFD file missing

thanks

PM sent.

[Modeup]

Hi Shawn ! Been messing with my new f30 bmw , if I could get the torrent for newest safe esys and the compatible psdzdata to start learning coding for my bmw. Thanks , great topic + great Shawn here! Cheers from Bulgaria !

[shawnsheridan]

Originally Posted by Modeup

Hi Shawn ! Been messing with my new f30 bmw , if I could get the torrent for newest safe esys and the compatible psdzdata to start learning coding for my bmw. Thanks , great topic + great Shawn here! Cheers from Bulgaria !

PM sent.

[KaraM320]

Hi ShawnSheridan,

I still see you going on strong, thanx for all the effort man.

Some mechanic has pulled a number on my ac compressor clutch. About two years ago I had to renew my timing chain and what I think they did was, they replaced my magnetic ac compressor with a regular one that is a bit shorter, so it messed up my belt that runs over it a few times. Local garage told me that he had to renew the belt, because it was sliced. Normally it is not very visible, but when I made a long trip I checked the engine bay regularly to see if everything was okay. And there it was, the belt went over the pulley. On my holiday location I got it set back again on the pulley, but it went over it again. But my ac worked just fine and the belt was not going to brake any time soon, so when I got back home I had it replaced with an original. But now my ac doesn't work because the clutch is not engaging, so only hot air. I think the bad mechanic has changed the compressor and coded the magnetic clutch off.

I read somewhere that it can be coded to get the ac clutch engaged in Esys. Now I need the program again, since I have a new laptop and the old Esys is not working anymore, I need a new working Esys. Can you help me out.

[shawnsheridan]

Originally Posted by KaraM320

Hi ShawnSheridan,

I still see you going on strong, thanx for all the effort man.

Some mechanic has pulled a number on my ac compressor clutch. About two years ago I had to renew my timing chain and what I think they did was, they replaced my magnetic ac compressor with a regular one that is a bit shorter, so it messed up my belt that runs over it a few times. Local garage told me that he had to renew the belt, because it was sliced. Normally it is not very visible, but when I made a long trip I checked the engine bay regularly to see if everything was okay. And there it was, the belt went over the pulley. On my holiday location I got it set back again on the pulley, but it went over it again. But my ac worked just fine and the belt was not going to brake any time soon, so when I got back home I had it replaced with an original. But now my ac doesn't work because the clutch is not engaging, so only hot air. I think the bad mechanic has changed the compressor and coded the magnetic clutch off.

I read somewhere that it can be coded to get the ac clutch engaged in Esys. Now I need the program again, since I have a new laptop and the old Esys is not working anymore, I need a new working Esys. Can you help me out.

PM sent.