[agarst89]

Hi Shawn,

Would you please send me links to e-sys and the launcher when you get a chance?

Thanks!

[alex191]

Originally Posted by shawnsheridan

PM sent.

Hello Shawn, can you please PM me a link to the software to code my E92, I have enet cable on order, but not software. Thanks a lot.

[shawnsheridan]

Originally Posted by agarst89

Hi Shawn,

Would you please send me links to e-sys and the launcher when you get a chance?

Thanks!

PM sent.

[shawnsheridan]

Originally Posted by alex191

Hello Shawn, can you please PM me a link to the software to code my E92, I have enet cable on order, but not software. Thanks a lot.

Your a long way from home. This is F-Series Coding, not E-Series. E-Sys and ENET Cable is for F/I/G Series cars, not older E-Series. You need a K+DCAN Cable and completely different software.

[alex191]

Originally Posted by shawnsheridan

Your a long way from home. This is F-Series Coding, not E-Series. E-Sys and ENET Cable is for F/I/G Series cars, not older E-Series. You need a K+DCAN Cable and completely different software.

Ok thanks for info. I do have K+DCAN cable INPA compatible, but i read in some forum I need ISTA/P or /D in order to retrofit CCC module from another car. The problem is - I can not flash MASK/CCC module it stays in state 7.

[shawnsheridan]

Originally Posted by alex191

Ok thanks for info. I do have K+DCAN cable INPA compatible, but i read in some forum I need ISTA/P or /D in order to retrofit CCC module from another car. The problem is - I can not flash MASK/CCC module it stays in state 7.

You can't flash with DCAN Cable. You need an ICOM Interface.

[alex191]

I did flash few modules successfully with DCAN, but this MASK/CCC giving me errors. So I just use the inet cable and winkfp to flash?

[shawnsheridan]

Originally Posted by alex191

I did flash few modules successfully with DCAN, but this MASK/CCC giving me errors. So I just use the inet cable and winkfp to flash?

No. ENET Cable is for F/I/G Series, not E-Series. You need an ICOM.

[beyonce]

Hi Shawn, may I also get your software please. Thank you

[shawnsheridan]

Originally Posted by sam235i

Hi Shawn, may I also get your software please. Thank you

PM sent.

[dasurpha]

Originally Posted by shawnsheridan

Is Launcher PRO error "Loading: E-Sys Launcher PSdZ API Module Failed! Error C:\ProgramData\TokenMaster\E-Sys Launcher Pro\bin\PSdzAPI.dll: Can't find dependent libraries."?

Finally got the time to dig deeper into this.

Still getting no dialog other than "...please contact Tokenmaster…" but as I presumed this seems to be a permissions issue. I'll continue the troubleshooting and will post here if anyone is seeing similar issues.

The Open procedure for service "ESENT" in DLL "C:\Windows\system32\esentprf.dll" failed with error code Access is denied.. Performance data for this service will not be available.

The Open procedure for service "Lsa" in DLL "C:\Windows\System32\Secur32.dll" failed with error code Access is denied.. Performance data for this service will not be available.

The Open procedure for service "MSDTC" in DLL "C:\Windows\system32\msdtcuiu.DLL" failed with error code The system cannot find the file specified.. Performance data for this service will not be available.

Unable to open the Server service performance object. The first four bytes (DWORD) of the Data section contains the status code.

Unable to open the job object \BaseNamedObjects\WmiProviderSubSystemHostJob for query access. The calling process may not have permission to open this job. The first four bytes (DWORD) of the Data section contains the status code.

The Open procedure for service "WmiApRpl" in DLL "C:\Windows\system32\wbem\wmiaprpl.dll" failed with error code The device is not ready.. Performance data for this service will not be available.

[shawnsheridan]

Originally Posted by dasurpha

Finally got the time to dig deeper into this.

Still getting no dialog other than "...please contact Tokenmaster…" but as I presumed this seems to be a permissions issue. I'll continue the troubleshooting and will post here if anyone is seeing similar issues.

The Open procedure for service "ESENT" in DLL "C:\Windows\system32\esentprf.dll" failed with error code Access is denied.. Performance data for this service will not be available.

The Open procedure for service "Lsa" in DLL "C:\Windows\System32\Secur32.dll" failed with error code Access is denied.. Performance data for this service will not be available.

The Open procedure for service "MSDTC" in DLL "C:\Windows\system32\msdtcuiu.DLL" failed with error code The system cannot find the file specified.. Performance data for this service will not be available.

Unable to open the Server service performance object. The first four bytes (DWORD) of the Data section contains the status code.

Unable to open the job object \BaseNamedObjects\WmiProviderSubSystemHostJob for query access. The calling process may not have permission to open this job. The first four bytes (DWORD) of the Data section contains the status code.

The Open procedure for service "WmiApRpl" in DLL "C:\Windows\system32\wbem\wmiaprpl.dll" failed with error code The device is not ready.. Performance data for this service will not be available.

Did you try running Launcher by Right-Clicking on it and "Run as Administrator"?

[Jarda_V]

Hello,
I would like to ask for E-Sys launcher link? Is it possible to install it in VMware workstation? Thank you in advance
Jaroslav

[shawnsheridan]

Originally Posted by Jarda_V

Hello,
I would like to ask for E-Sys launcher link? Is it possible to install it in VMware workstation? Thank you in advance
Jaroslav

VM use not supported. PM sent.

[MEHDIF30]

Hello Shawn,

Would you please send me links to e-sys and the launcher with psdzdata full.

Thanks in advance

[shawnsheridan]

Originally Posted by MEHDIF30

Hello Shawn,

Would you please send me links to e-sys and the launcher with psdzdata full.

Thanks in advance

PM sent.

[phack79]

Hi Shawn!

shawnsheridan My token is will expire at april of 2020 Can you help me to extend it? I use Launcher pro

Thank you in advance!
P.

[shawnsheridan]

Originally Posted by phack79

Hi Shawn!

shawnsheridan My token is will expire at april of 2020 Can you help me to extend it? I use Launcher pro

Thank you in advance!
P.

It's not just you, it is everyone using Launcher PRO 2.8.2. and the BFU .est token. There is no extending it. Unless Token Master does something between now and then, after expiration your only choices will be Launcher PRO 3.x or E-SysX.

[adradi]

Hello Shawn!
Please could you send me a link for the e-sys, token generator, and PSdZData ?
Thanks in advance!

[shawnsheridan]

Originally Posted by adradi

Hello Shawn!
Please could you send me a link for the e-sys, token generator, and PSdZData ?
Thanks in advance!

PM sent.

[Evangoz]

Originally Posted by splteko

Everyone, welcome TokenBuster. The tool generates 50-year EST tokens as well as response codes for Esys Launcher.

The only Launcher version supported in this first release is:
E-Sys Launcher Pro v 2.8.1 build 155.

Other launcher versions use different keys and won't accept generated tokens. I plan to add support for newer launchers sometime soon. I have 2.9.15_build_333, if anyone has more recent versions please share.

Tokenbuster and launchers can be had here:

https://mega.nz/#F!7psllQCC!fukCzDV7n7op0aSoOrV19A

Hi, the link seems to be inactive? anyone have an active one?

[shawnsheridan]

Originally Posted by Evangoz

Hi, the link seems to be inactive? anyone have an active one?

You can use E-Sys Launcher PRO 2.8.2 for free, at least until April 2020 when it expires:
http://tokenmaster.blogspot.com/2019...r-pro-282.html