03-23-2024, 10:53 AM | #1 |
Registered
0
Rep 1
Posts |
Is my DME fried?
2013 bmw 328i xdrive N20 Changed my oil filter housing and oil cooler gaskets yesterday and mixed up 2 of the cam lock plugs on the DME wouldn't fire up, figured it out it starts now but I get chassis stabilisation error and 12 codes that will not clear with ista I will attach a photo of the codes. I checked all the fuses in the trunk and under the hood on the passenger side and help is greatly appreciated thanks.
|
03-26-2024, 12:23 AM | #3 |
Lieutenant Colonel
553
Rep 1,582
Posts |
Some serious codes require time (prolonged driving. start/stop, etc) to reset. There is a way to accelerate the process by following a multi-step driving procedure. You should check, if the error codes have that status. Check, make sure you are not in "transport mode".
__________________
Help each other: if you manage to fix your issue (especially with help from this forum), don't be a d*ck and disappear. Follow-up by posting the solution so you can help others.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|