Would Style 329 8J ET30 with 245/45/18 fit?

arthurzzz · 10-08-2021, 06:08 PM

Anyone run these specs? I have my 320i Xdrive slightly dropped (15mm). Wondering if not too much meat

if I buy those

Logicoeur · 10-13-2021, 09:45 PM

Yes it will fit. There are plenty of posts here of larger setups fitting. Your drop is basically stock.

I am dropped 1" all around, xdrive, 18x9 et32 and 255/40/18. No scraping lock to lock.

Pussiwillow · 01-17-2022, 12:15 PM

Quote:

Originally Posted by Logicoeur

Yes it will fit. There are plenty of posts here of larger setups fitting. Your drop is basically stock.

I am dropped 1" all around, xdrive, 18x9 et32 and 255/40/18. No scraping lock to lock.

I'm about to pull trigger on 18x9 +35
You're a little more aggressive offset so this gives me hope on 255 front, similar drop, do you have any fitment pictures, I was going to *try* for a 265 rear as I imagine no way a 265 is fitting on the front but may stay 255/40 squared

Logicoeur · 01-17-2022, 12:40 PM

Quote:

Originally Posted by Pussiwillow

Quote:

Originally Posted by Logicoeur

Yes it will fit. There are plenty of posts here of larger setups fitting. Your drop is basically stock.

I am dropped 1" all around, xdrive, 18x9 et32 and 255/40/18. No scraping lock to lock.

I'm about to pull trigger on 18x9 +35
You're a little more aggressive offset so this gives me hope on 255 front, similar drop, do you have any fitment pictures, I was going to *try* for a 265 rear as I imagine no way a 265 is fitting on the front but may stay 255/40 squared

Photos before the drop and stock camber running sumitomo htziii. With the drop there is definitely more clearance fender side, and I am running ECS in the same sizing. No rubbing before or after, lock to lock.

10-08-2021, 06:08 PM	#1
arthurzzz Registered 0 Rep 1 Posts Drives: BMW 320i Xdrive Join Date: Oct 2021 Location: Moscow, Russia iTrader: (0)	Would Style 329 8J ET30 with 245/45/18 fit? Anyone run these specs? I have my 320i Xdrive slightly dropped (15mm). Wondering if not too much meat if I buy those
	Appreciate 0 Tweet Quote

10-13-2021, 09:45 PM	#2
Logicoeur Lieutenant Colonel 991 Rep 1,934 Posts Drives: F30 335i xDrive Join Date: Feb 2018 Location: Boston iTrader: (0)	Yes it will fit. There are plenty of posts here of larger setups fitting. Your drop is basically stock. I am dropped 1" all around, xdrive, 18x9 et32 and 255/40/18. No scraping lock to lock. __________________ F30 335iX \| Remus Axleback \| Fabspeed Catted DP \| VRSF Comp IC \| 18X9 ET35 19lb MT1 \| 255/40/18 ECS \| Ohlins RT Millway Street \| Millway Control Arm Bushings \| Turner Endlinks \| TMH 75mm 14x1.5 Studs \| BMW MPerf LSD \| XDelete \| Pipercross Filter \| MHD Stg2 93
	Appreciate 0 Quote