[Missouri_f30]

what pistons are you planning on running? ive been planning to rebuild mine mostly because my timing chain failed and car wont crank😩

[Kel918]

Originally Posted by Missouri_f30

what pistons are you planning on running? ive been planning to rebuild mine mostly because my timing chain failed and car wont crank😩

I went with Carrillo Cp pistons, I listed everything

[Kel918]

I got the dinan fuel correction kit, and I'm thinking of making similar copies for a way lower price. Would anybody be interested ??

[sqwinny]

Curious to see how this works out for you. I went bpm4 ekp upgrade and a hellcat stage 2.5 fuel pump upgrade. Both were plug and play.

My build is taking a delay, found a water leak in my master bathroom and hello now bathroom instead of built motor 😑. At least the misses will be happy for awhile.

[Kel918]

Originally Posted by sqwinny

Curious to see how this works out for you. I went bpm4 ekp upgrade and a hellcat stage 2.5 fuel pump upgrade. Both were plug and play.

My build is taking a delay, found a water leak in my master bathroom and hello now bathroom instead of built motor 😑. At least the misses will be happy for awhile.

thanks for the info !! I went with the walbro 450lph. I was also thinking of the bpmk4 ekp because I read that aftermarket pumps can burn out the factory fuel pump controller. I also dropped off that part from dinan to a machine shop to have a similar one made.

[Kel918]

Also going to drop the motor off this week coming up, so I can have a turbo manifold made for a garrett g25-660 , it will be plug and play with a bracket for the factory Electronic wastegate (EWG) . I plan to start selling these manifolds so that everyone has an option for a bigger turbo. I'm also waiting on this rotrex supercharger so I can build the bracket and have the machine shop mass produce it too.

[navardi]

Originally Posted by Kel918

Also going to drop the motor off this week coming up, so I can have a turbo manifold made for a garrett g25-660 , it will be plug and play with a bracket for the factory Electronic wastegate (EWG) . I plan to start selling these manifolds so that everyone has an option for a bigger turbo. I'm also waiting on this rotrex supercharger so I can build the bracket and have the machine shop mass produce it too.

Looking forward to the setup

[Kel918]

Originally Posted by navardi

Looking forward to the setup

Thanks !!, unfortunately we had a ridiculous snow storm here and will have to wait until next Wednesday now

[Kel918]

I know it's been a while but here are some pics of the garrett g25-660 that came in. I plan on making turbo kits for 3 stages. These pics are from the shop to who's going to be making the prototype turbo manifolds + for stage 2 I'm trying to see if we can fit the the g25 into the stock turbine for plug and play