[plusrd]

Hello friends

I have BMW f30 320d I use idrive cic of f20 can I flash it to be f30 because it's work good in my f30 but I miss some features so that's why i want flash it
I see f20 car in idrive screen not f30 car

[plusrd]

Any help

[atzebmw]

If the F20 car in the screen is the only problem you don‘t need to flash.
For that small problem you only have to code the headunit.

[plusrd]

Because camera not working only rear and many other features like time , date , can you help me , how to code it , thanks

[plusrd]

Any help

[plusrd]

Hello

[atzebmw]

Did you ever use E-Sys?

[plusrd]

hello my friend
i used ista+ i see folowing , how can i encoding , thanks
ista+ :
Fault description : The fault is entered if a control unit has already been encoded and is installed from another vehicle. After the ignition is turned on, the control unit compares the vehicle identification number (coding test stamp) with the vehicle identification number sent on the data bus. The fault is stored if an irregularity is established during this check.

Action in service Encode control unit and start up.


Re-encode head unit :
DIAGECODE: D6510_HU000000_90_211

[atzebmw]

For re-encoding the headunit you need E-Sys.
But i'm not sure if this will work because the headunit seems to have still saved the VIN of the donor car.

[plusrd]

I need flashing guide for cic , i have all tools and data

[plusrd]

Flashing done by esys , my idrive now working very good

[Sari]

Can you post the process how you did that and what Esys and Psdzdata version you used

Please and thank you