[SpannerBracket]

Hi All,

I've got a 2013 330d without the Enhanced Bluetooth Audio option.

My first attempt at coding to add this has failed.

I've got E-SYS 3.28.1 (although started with 3.27.1).
E-SYS Launcher Pro 2.8.2
psdzdata 63.3.003

The car's I-Step is F020-13-07-506.

I'm trying to change the FA paramater 6NH to 6NL (as I have BMW Assist, although I've tried 6NK too).

When I code HU_NBT, the iDrive reboots, but there is an error during encoding and the Bluetooth Audio feature isn't enabled.

This is the log:

Caf's suchen
Tal wird generiert
Abarbeitung wird gestartet

TAL execution started.
ExecutionID=2019/09/15-16:55:30.541
[] prepareTALExecution started
[] prepareTALExecution finished
[] prepareVehicleForCoding started
[] prepareVehicleForCoding finished
[HU_NBT - 63] prepareECUforCoding started
[HU_NBT - 63] There was an error during TAL execution, please check the log files.
[HU_NBT - 63] - [Exception - UNKNOWN] Errors during NCD generation for CAF cafd_00000ded-003_004_010: 
DataGroup ., Function .: More than one condition parameter is active: [., .]
[HU_NBT - 63] finalizeECUCoding started
[HU_NBT - 63] finalizeECUCoding finished
[] finalizeVehicleCoding started
[] finalizeVehicleCoding finished
[] finalizeTALExecution started
[] finalizeTALExecution finished
TAL execution finished
TAL-Execution finished with status: "FinishedWithError". [C207]
TAL execution finished. Duration: "23s". [C206]
Abarbeitung beendet

Anyone else experienced anything similar? Any advice?

Thanks,
SpannerBracket

[SpannerBracket]

Sorry - found the issue.

Code should be 6NS when used with BMW Assist, not 6NL!

Hope this is of some help, as some posts here seem to state 6NL!

Thanks,
SpannerBracket