[_baz]

Custom made for me by Rimscarnated / Tekoa Forged last year.

These are forged, 2 piece split wheels
The barrel and lip is one piece and the faces are bolted on.
Based on the 666M
Ferric grey centres
Polished lips
Hidden hardware (easier to clean and look less busy imho)
Fronts are 19x9 ET22
Rears are 19x10 ET35
5x120
Tyres are Accelera Phi
7mm tread +
215/35 front
225/40 rear

These specs were calculated so the wheels would fit perfectly on an F30 / F31 with some room to adjust with spacers, and have clearance for M sport calipers.

To achieve the fitment pictured on my 330e I used 5mm spacer up front and a 12mm spacer at the rear for that super flush look. Without the spacers the wheels and tyres will tuck nicely within the arches.

Obviously I was on air suspension, but these wheels would work with a static / spring set up also.

Do not have TPMS
(As they were just show wheels I didn’t feel the need)

The wheels were on the car for about three shows and a handful of photoshoots only.
Always had daily wheels to run in bad weather and through the winter.

Looking for £2700 Ono

No swaps or PX as the car is now sold.

Collection from Nuneaton Warwickshire preferred.

Any more questions or pics just ask.

[_baz]

Price drop for anyone on here.

£2550

They owe me over £3k but I know people don’t really have spare cash for fancy wheels with the economy as it is right now.

[_baz]

On eBay

666M Forged Splits


£2500 for anyone through here. Found some more wheels I want and really need these gone now.

[_baz]

Provisionally Sold
pending collection at the weekend.

[_baz]

Sold sold sold