[nl dutchy jay]

Hey guys!

After my F31 got broken into, and the entire nav stolen, I finally have it back. I immediately started coding it back to the options I previously had.

Unfortunately, I ran into a problem: somehow, I cannot (re)code my "SET" button on my steeringwheel to operate as a limiter.

I use ESYS and this is the problem I run into. The following lines I need to code:

KOMBI 3003 SLD_ENABLE
ICM 3000 SLD_Funktion aktiv
ICM 3000 C_Umschaltung_ACC_DCC zugelassen
ICM 3000 LDM_SET_Taste nur_SET__O

However, my vehicle only shows me the KOMBI and the C_Umschaltung_ACC_DCC zugelassen option. The other two options aren't even in the list to code. Needless to say, with coding those two, the button still acts as a cruise control button, and not as the LIMIT button.

Does anyone have a feint idea what can cause this? Or how I can solve this?

Thank you in advance!

[atzebmw]

This happens when you only search for exactly this value.
If you enter "SLD_FUNKTION" in the search above, you will find the value that is actually called C_SLD_FUNKTION.
I didn't find the last value either.
It works without it.

[nl dutchy jay]

Legend, I will try it tonight! Thank you so much for your help!

[nl dutchy jay]

Thank you again man, that totally worked! You saved me a trip to the local coder again!

It is the 2nd time you've greatly helped me. Is there any way I can buy you a beer or something? You got any donationlinks running?

[atzebmw]

No problem.
No donation necessary.
I am happy if I could help.