03-25-2020, 01:42 PM | #1 |
Major
477
Rep 1,467
Posts |
N55 oil cooler line gaskets
I cant figure out if the oil cooler lines are supposed to have gaskets on them. I cant find the schematic for these lines on realoem. Does anyone have part numbers or know if they even have gaskets? See picture below for the 2 lines I am referring to.
__________________
2014 EBII 435ix - Stage 2+ Dragy: 0-60 3.61; 60-130 10.18
2020 MG M340ix - Dragy: 0-60 3.48 2018 LBB X4M40i - Stock Dragy: 0-60 4.85 |
03-25-2020, 02:15 PM | #2 |
Captain
287
Rep 864
Posts |
(2) Oil Cooler Line O-Rings
It is not necessary to replace the two green o-rings common to the lines - however; when I replaced mine on the N54 one of the lines leaked and I ended up replacing both after I ordered the parts via on-line. Real OEM Shows they are part #:
https://www.realoem.com/bmw/enUS/par...&q=11537590575 I am certain there are prior post (I believe I even post about this way back) Look under the Cooling-System turbocharger schematic |
Appreciate
0
|
03-25-2020, 04:07 PM | #3 |
Lieutenant Colonel
472
Rep 1,560
Posts |
From FCP Eur. I think these are what you are looking for.
https://www.fcpeuro.com/BMW-parts/43...&b=9&d=3584&v= |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|