BMW F30 3 Series Coding DIY - Code Auto Start Stop, DVD, Folding Mirrors, Etc.

vicfalc09 · 08-05-2019, 06:55 PM

Hi Shawn

Could i have the latest esys latest version, launcher and psdzdata please?

Thank you!

DBnR · 08-06-2019, 06:08 AM

Hi. New user here, also asking for eSys, launcher and PSdZData, thank you

shawnsheridan · 08-06-2019, 06:43 AM

Quote:

Originally Posted by unclez

Hi Shawn,

would also like to ask for esys latest version, launcher and psdzdata please

EDIT: I just realized that I need to wait for my account to be able to use PM, if you do not mind I will write you once I am full active.

Quote:

Originally Posted by Skiwil

Hi Shawn

Could i have the latest esys latest version, launcher and psdzdata please

Quote:

Originally Posted by vicfalc09

Hi Shawn

Could i have the latest esys latest version, launcher and psdzdata please?

Thank you!

Quote:

Originally Posted by DBnR

Hi. New user here, also asking for eSys, launcher and PSdZData, thank you

PM's sent.

torobravo33 · 08-06-2019, 09:31 AM

Can anyone tell me why I cannot turn off the sidemarkers on my 2018 340ix? I connected bimmercode and the sidemarkers were set to "off" by default. However, they are definitely not off. I even went into expert mode, and the output was already set to off for both sidemarkers.

If I play with the sidemarker settings (not expert mode), I can get the amber eyebrows to stay on, which actually looks kind of cool, but they flicker a little bit. However, I cannot figure out how to turn off the little amber sidemarkers on the side of the headlight.

Any help would be immensely appreciated.

thornfrog · 08-06-2019, 10:01 AM

So I retrofitted the adaptive headlight a couple years back and I'm planning to undo this. I used ESYS 3.27.1 and psdzlite v3.58 when I did VO coding and FEM_BODY coding.
My question is do I need to use exactly the same versions to undo the coding I had done? or Can I just use the latest one? Does it have anything to do with i-step thing?
Sorry if it's noob question. It's been a while since I coded.
Thanks in advance!

shawnsheridan · 08-06-2019, 11:29 AM

Quote:

Originally Posted by thornfrog

So I retrofitted the adaptive headlight a couple years back and I'm planning to undo this. I used ESYS 3.27.1 and psdzlite v3.58 when I did VO coding and FEM_BODY coding.
My question is do I need to use exactly the same versions to undo the coding I had done? or Can I just use the latest one? Does it have anything to do with i-step thing?
Sorry if it's noob question. It's been a while since I coded.
Thanks in advance!

Should be able to use latest versions.

fred128 · 08-06-2019, 06:12 PM

Hello Shawn,
New to coding on the F-30 LCI 2016. Could I get a link for the software please?
Legend.
Thanks

shawnsheridan · 08-06-2019, 06:24 PM

Quote:

Originally Posted by fred128

Hello Shawn,
New to coding on the F-30 LCI 2016. Could I get a link for the software please?
Legend.
Thanks

PM sent.

m3shelly · 08-07-2019, 09:58 PM

Ok. I had to start a completely new account here at the BimmerForum.

I had an account, but I was an idiot, and used an ALT-code in my username, and I can't use alt-codes on my new mobile phone.

My old username was m³shelly.

I'm using up posts, so I can send, and receive PMs with my new username.

m3shelly · 08-07-2019, 09:59 PM

I'm not exactly how many posts I need to add before I can send/receive PMs, but I think it's 8?, maybe 10?

m3shelly · 08-07-2019, 10:01 PM

My story is this... I had a version of the coding software that I 'bought' from a download site, that had NCSExpert, Ediabas, and INPALoad. That was >5 years ago, since I had just bought an e90 335ix (2011), and I was successful at changing a bunch of options on that car.

m3shelly · 08-07-2019, 10:03 PM

That software package came with ESYS, and what I thought was everything to code the F-Series cars. I put bought in parentheses, because I didn't pay anything but a few bucks for the convenience. The USB to OBD-II cable was more expensive.

m3shelly · 08-07-2019, 10:04 PM

Then, last week I purchased a new(er) car... a 2016 340ix. So, I pulled out the old downloaded, .zip files, and unzipped the F-series files. Well, it didn't work for the newer car. That was 2012 or 2013, so it didn't surprise me.

m3shelly · 08-07-2019, 10:06 PM

So, I went back online again to search for a newer version of Esys, with a token generator that would work on my newer car. I was finally successful. I talked to the car and changed one KOMBI parameter, to add the digital speedo on the BC options in the middle of the speedo (which wasn't a huge deal for me, since my car has HUD anyway).

m3shelly · 08-07-2019, 10:07 PM

I did notice that some of the CAFD files, under a few of the modules, gave me errors when trying to read them. I am assuming that's because the version of Esys I found last night was still slightly too old for my car (I'm not really sure though).

m3shelly · 08-07-2019, 10:09 PM

Then, I went back in tonight to try and code some more changes, and the damn .EST token file failed to work!! So, first, let me apologize for posting a bunch of posts on this thread, to give me access to the PM system.

Second, can I please ask for a PMed link to a newer version of Esys, and a token generator?

m3shelly · 08-07-2019, 10:16 PM

Also, if you know anyone interested, I'm selling a 2000 M5 (e39) right now. It's in nearly perfect condition, black on black. (I was never successful at coding anything on that car, but I didn't try too much, since there isn't much to be changed on the e39s.

m3shelly · 08-07-2019, 10:23 PM

Quote:

Originally Posted by shawnsheridan

PM sent.

So, if I could please, please ask for links to the newest versions? I would much appreciate it.

Also, if anyone here needs .zipped copies of the e9x software, I have that. I would have to upload to my DropBox account though, since I don't have a website to host the data files.

I will say, after my first experience using ESYS, it is much, much easier to use than NCSExpert and INPAload. BMW is definitely simplifying the software, and anyone with an F-series car is so lucky to be using a simpler software and coding method.

shawnsheridan · 08-08-2019, 07:26 AM

Quote:

Originally Posted by m3shelly

So, if I could please, please ask for links to the newest versions? I would much appreciate it.
...

PM sent.

m3shelly · 08-08-2019, 08:53 AM

Quote:

Originally Posted by shawnsheridan

PM sent.

Thanks again Shawn.

Maybe I should have waited before saying NCSExpert and INPA-Load was more difficult. As stated earlier in this thread, I was able to get E-Sys working, using E-Sys Launcher Pro with the FDL Editor working for ONE DAY! I put it down since it was getting late, and I didn't have access the next day (the PIN didn't work).

I came here to try and re-download everything, now using Launcher Premium, going through all the date-change steps for the Launcher Work-Around, and I still get the Date Incorrect or Manipulated error.

If anyone has any suggestions, it would be helpful. I have a different laptop I will try later tonight if I have time.
Thanks!
Shelly

m3shelly · 08-10-2019, 02:21 PM

Quote:

Originally Posted by m3shelly

Thanks again Shawn.

Maybe I should have waited before saying NCSExpert and INPA-Load was more difficult. As stated earlier in this thread, I was able to get E-Sys working, using E-Sys Launcher Pro with the FDL Editor working for ONE DAY! I put it down since it was getting late, and I didn't have access the next day (the PIN didn't work).

I came here to try and re-download everything, now using Launcher Premium, going through all the date-change steps for the Launcher Work-Around, and I still get the Date Incorrect or Manipulated error.

If anyone has any suggestions, it would be helpful. I have a different laptop I will try later tonight if I have time.
Thanks!
Shelly

Not sure what changed, or what was different, but I went back and relaunched everything Friday, on the laptop I had issues using the day before. And, ALL WAS WELL!!

Thanks so much for the support here! And, if you're watching, thanks to everyone who added to the database of values to change for specific functions.

I changed about 90% of the things I wanted to change, primarily removing the seat belt notifications, and legal screen disclaimers.

Thanks again!!!

shawnsheridan · 08-10-2019, 02:45 PM

Quote:

Originally Posted by m3shelly

Not sure what changed, or what was different, but I went back and relaunched everything Friday, on the laptop I had issues using the day before. And, ALL WAS WELL!!

Thanks so much for the support here! And, if you're watching, thanks to everyone who added to the database of values to change for specific functions.

I changed about 90% of the things I wanted to change, primarily removing the seat belt notifications, and legal screen disclaimers.

Thanks again!!!

08-05-2019, 06:55 PM	#14763
vicfalc09 Second Lieutenant 211 Rep 274 Posts Drives: M340i xDrive Join Date: Feb 2019 Location: New Jersey iTrader: (0)	Hi Shawn Could i have the latest esys latest version, launcher and psdzdata please? Thank you!
	Appreciate 0 Quote

08-06-2019, 06:08 AM	#14764
DBnR New Member 0 Rep 6 Posts Drives: BMW 320i Join Date: Aug 2019 Location: Home iTrader: (0)	Hi. New user here, also asking for eSys, launcher and PSdZData, thank you
	Appreciate 0 Quote

08-06-2019, 09:31 AM	#14766
torobravo33 New Member -2 Rep 13 Posts Drives: BMW 340ix Join Date: Aug 2019 Location: NYC iTrader: (0)	Can't turn off sidemarkers Can anyone tell me why I cannot turn off the sidemarkers on my 2018 340ix? I connected bimmercode and the sidemarkers were set to "off" by default. However, they are definitely not off. I even went into expert mode, and the output was already set to off for both sidemarkers. If I play with the sidemarker settings (not expert mode), I can get the amber eyebrows to stay on, which actually looks kind of cool, but they flicker a little bit. However, I cannot figure out how to turn off the little amber sidemarkers on the side of the headlight. Any help would be immensely appreciated.
	Appreciate 0 Quote

08-06-2019, 10:01 AM	#14767
thornfrog New Member 12 Rep 29 Posts Drives: '15 328i xDrive sedan Join Date: Feb 2015 Location: IL iTrader: (0)	Esys and PsDzLite versions need to match ? So I retrofitted the adaptive headlight a couple years back and I'm planning to undo this. I used ESYS 3.27.1 and psdzlite v3.58 when I did VO coding and FEM_BODY coding. My question is do I need to use exactly the same versions to undo the coding I had done? or Can I just use the latest one? Does it have anything to do with i-step thing? Sorry if it's noob question. It's been a while since I coded. Thanks in advance!
	Appreciate 0 Quote

08-06-2019, 06:12 PM	#14769
fred128 Registered 0 Rep 4 Posts Drives: 320i 2016 M-Sport Join Date: Oct 2017 Location: Poland iTrader: (0)	Hello Shawn, New to coding on the F-30 LCI 2016. Could I get a link for the software please? Legend. Thanks
	Appreciate 0 Quote

08-07-2019, 09:58 PM	#14771
m3shelly New Member 0 Rep 19 Posts Drives: 1988 M3, 2000 M5, 2017 340ix Join Date: Aug 2019 Location: Oconomowoc, WI iTrader: (0)	Jeez Ok. I had to start a completely new account here at the BimmerForum. I had an account, but I was an idiot, and used an ALT-code in my username, and I can't use alt-codes on my new mobile phone. My old username was m³shelly. I'm using up posts, so I can send, and receive PMs with my new username.
	Appreciate 0 Quote

08-07-2019, 09:59 PM	#14772
m3shelly New Member 0 Rep 19 Posts Drives: 1988 M3, 2000 M5, 2017 340ix Join Date: Aug 2019 Location: Oconomowoc, WI iTrader: (0)	I'm not exactly how many posts I need to add before I can send/receive PMs, but I think it's 8?, maybe 10?
	Appreciate 0 Quote

08-07-2019, 10:01 PM	#14773
m3shelly New Member 0 Rep 19 Posts Drives: 1988 M3, 2000 M5, 2017 340ix Join Date: Aug 2019 Location: Oconomowoc, WI iTrader: (0)	My story is this... I had a version of the coding software that I 'bought' from a download site, that had NCSExpert, Ediabas, and INPALoad. That was >5 years ago, since I had just bought an e90 335ix (2011), and I was successful at changing a bunch of options on that car.
	Appreciate 0 Quote

08-07-2019, 10:03 PM	#14774
m3shelly New Member 0 Rep 19 Posts Drives: 1988 M3, 2000 M5, 2017 340ix Join Date: Aug 2019 Location: Oconomowoc, WI iTrader: (0)	That software package came with ESYS, and what I thought was everything to code the F-Series cars. I put bought in parentheses, because I didn't pay anything but a few bucks for the convenience. The USB to OBD-II cable was more expensive.
	Appreciate 0 Quote

08-07-2019, 10:04 PM	#14775
m3shelly New Member 0 Rep 19 Posts Drives: 1988 M3, 2000 M5, 2017 340ix Join Date: Aug 2019 Location: Oconomowoc, WI iTrader: (0)	Then, last week I purchased a new(er) car... a 2016 340ix. So, I pulled out the old downloaded, .zip files, and unzipped the F-series files. Well, it didn't work for the newer car. That was 2012 or 2013, so it didn't surprise me.
	Appreciate 0 Quote

08-07-2019, 10:06 PM	#14776
m3shelly New Member 0 Rep 19 Posts Drives: 1988 M3, 2000 M5, 2017 340ix Join Date: Aug 2019 Location: Oconomowoc, WI iTrader: (0)	So, I went back online again to search for a newer version of Esys, with a token generator that would work on my newer car. I was finally successful. I talked to the car and changed one KOMBI parameter, to add the digital speedo on the BC options in the middle of the speedo (which wasn't a huge deal for me, since my car has HUD anyway).
	Appreciate 0 Quote

08-07-2019, 10:07 PM	#14777
m3shelly New Member 0 Rep 19 Posts Drives: 1988 M3, 2000 M5, 2017 340ix Join Date: Aug 2019 Location: Oconomowoc, WI iTrader: (0)	I did notice that some of the CAFD files, under a few of the modules, gave me errors when trying to read them. I am assuming that's because the version of Esys I found last night was still slightly too old for my car (I'm not really sure though).
	Appreciate 0 Quote

08-07-2019, 10:09 PM	#14778
m3shelly New Member 0 Rep 19 Posts Drives: 1988 M3, 2000 M5, 2017 340ix Join Date: Aug 2019 Location: Oconomowoc, WI iTrader: (0)	Then, I went back in tonight to try and code some more changes, and the damn .EST token file failed to work!! So, first, let me apologize for posting a bunch of posts on this thread, to give me access to the PM system. Second, can I please ask for a PMed link to a newer version of Esys, and a token generator?
	Appreciate 0 Quote

08-07-2019, 10:16 PM	#14779
m3shelly New Member 0 Rep 19 Posts Drives: 1988 M3, 2000 M5, 2017 340ix Join Date: Aug 2019 Location: Oconomowoc, WI iTrader: (0)	Also, if you know anyone interested, I'm selling a 2000 M5 (e39) right now. It's in nearly perfect condition, black on black. (I was never successful at coding anything on that car, but I didn't try too much, since there isn't much to be changed on the e39s.
	Appreciate 0 Quote