[favourhisashi]

Hello Shawn
Can you send me the latest version of psdzdata, thanks.

[shawnsheridan]

Originally Posted by favourhisashi

Hello Shawn
Can you send me the latest version of psdzdata, thanks.

PM sent.

[WhiteBoyChrome]

Originally Posted by shawnsheridan

With E-SYs, Inject CAFD into Amp ECU and VO Code it.

Hey Shawn, I got around to injecting the cafd into the ampt ecu and reset faults in ista+. Turned green and everything in the MOST loop is green now but still no audio from speakers. Not entirely sure where to go next with the issue. I did notice when checking cafd there were alot of them to pick from and maybe I picked the wrong one, idk. Heading back out to the garage tomorrow and hopefully tackling the problem. Also, idk if it means anything as I can't find anything on the internet to describe having both lights lit up solid in the amp(solid red and yellow light).

Thanks, Brandon

[shawnsheridan]

Originally Posted by WhiteBoyChrome

Hey Shawn, I got around to injecting the cafd into the ampt ecu and reset faults in ista+. Turned green and everything in the MOST loop is green now but still no audio from speakers. Not entirely sure where to go next with the issue. I did notice when checking cafd there were alot of them to pick from and maybe I picked the wrong one, idk. Heading back out to the garage tomorrow and hopefully tackling the problem. Also, idk if it means anything as I can't find anything on the internet to describe having both lights lit up solid in the amp(solid red and yellow light).

Thanks, Brandon

Is Donor amp an identical replacement for the factory fitted amp?

[WhiteBoyChrome]

Originally Posted by shawnsheridan

Is Donor amp an identical replacement for the factory fitted amp?

Yes they're identical down to the model number (BE B104). Only 2 things I can think of is. It might of came out of a 5/7 series while my cars a 3 series. And the amps manufacturer Date is 4 months later

Brandon

[shawnsheridan]

Originally Posted by WhiteBoyChrome

Yes they're identical down to the model number (BE B104). Only 2 things I can think of is. It might of came out of a 5/7 series while my cars a 3 series. And the amps manufacturer Date is 4 months later

Brandon

No idea. Check these FDL Codes and make sure they are correct for your setup:

AMPLIFIER_VARIANT
AUDIO_SYSTEM

[WhiteBoyChrome]

Originally Posted by shawnsheridan

No idea. Check these FDL Codes and make sure they are correct for your setup:

AMPLIFIER_VARIANT
AUDIO_SYSTEM

i'm in the fdl codes but not finding either of those. would this be under ampt or hu_cic

[WhiteBoyChrome]

Originally Posted by WhiteBoyChrome

i'm in the fdl codes but not finding either of those. would this be under ampt or hu_cic

audio system cic is set to top hifi and audio sys var is set to sa_audio_system1

[WhiteBoyChrome]

Checked my car with bimmerlink and amplifier has 0 errors, but headunit is showing 2 errors. Think my next steps going to be buying bimmerlink and finding out what those errors are. Hopefully lead me to my no audio issue. As I stated before, this car was a mechanic special so I have no idea what issues it had prior to owning it =/. Appreciate your help Shawn

[shawnsheridan]

Originally Posted by WhiteBoyChrome

Checked my car with bimmerlink and amplifier has 0 errors, but headunit is showing 2 errors. Think my next steps going to be buying bimmerlink and finding out what those errors are. Hopefully lead me to my no audio issue. As I stated before, this car was a mechanic special so I have no idea what issues it had prior to owning it =/. Appreciate your help Shawn

[WhiteBoyChrome]

Originally Posted by shawnsheridan

Afternoon Shawn! So I just got back from the local import shop and what they've found was the front electronic module is throwing 250ish faults with their scanner(they tried to clear the faults but were unsuccessful)and suggest starting there. I asked if it's possible for me to order and program this myself and they suggested not to and go to the nearest bmw dealership. Well that's 3 hours away in Minneapolis =/. So my question is. IS this something I could possibly do myself with esys or would you also suggest taking it to a dealership?

I'm planning on getting down there and checking all the wiring/fuses etc just to be safe prior to making a decision of course. They say these are notorious for getting wet due to their location.

Thank you, Brandon

[shawnsheridan]

Originally Posted by WhiteBoyChrome

Afternoon Shawn! So I just got back from the local import shop and what they've found was the front electronic module is throwing 250ish faults with their scanner(they tried to clear the faults but were unsuccessful)and suggest starting there. I asked if it's possible for me to order and program this myself and they suggested not to and go to the nearest bmw dealership. Well that's 3 hours away in Minneapolis =/. So my question is. IS this something I could possibly do myself with esys or would you also suggest taking it to a dealership?

I'm planning on getting down there and checking all the wiring/fuses etc just to be safe prior to making a decision of course. They say these are notorious for getting wet due to their location.

Thank you, Brandon

You can program (flash) FEM with E-Sys and PSdZData Full. PM sent.

[WhiteBoyChrome]

Originally Posted by shawnsheridan

You can program (flash) FEM with E-Sys and PSdZData Full. PM sent.

Thank you Shawn! I just wanted to take the time to tell you thank you so much for all you do for everyone here, and on other bmw websites. Your comments on alot of other people's posts have helped me figure out alot with my newly acquired f30

[shawnsheridan]

Originally Posted by WhiteBoyChrome

Thank you Shawn! I just wanted to take the time to tell you thank you so much for all you do for everyone here, and on other bmw websites. Your comments on alot of other people's posts have helped me figure out alot with my newly acquired f30

[St.Elmo]

Wow, this thread opened a complete new world. Thanks for sharing everybody!

[00punisher]

Hi Shawn,

I have a 2015 F36 420d. Which is currently the right combination of E-sys version and psdzdata lite?

I coded some things some years ago and I would like to retake the coding ;-) But what I have installed does not work.

Should I uninstall what I have first?

Thanks!

[shawnsheridan]

Originally Posted by 00punisher

Hi Shawn,

I have a 2015 F36 420d. Which is currently the right combination of E-sys version and psdzdata lite?

I coded some things some years ago and I would like to retake the coding ;-) But what I have installed does not work.

Should I uninstall what I have first?

Thanks!

I'd uninstall and start over. PM sent.

[00punisher]

Originally Posted by shawnsheridan

I'd uninstall and start over. PM sent.

Thanks!!!

[Simbo]

Thinking about getting into coding my vehicle. I’m in the UK and have a 2016 F30 320i. I’ve just ordered an enet cable…..what else do I need? Just esys and data files? Would someone be kind enough to point me in the right direction. Thanks.

[shawnsheridan]

Originally Posted by Simbo

Thinking about getting into coding my vehicle. I’m in the UK and have a 2016 F30 320i. I’ve just ordered an enet cable…..what else do I need? Just esys and data files? Would someone be kind enough to point me in the right direction. Thanks.

PM sent.

[GDLF.]

Hey Shawn!
Could you provide the lastest version & stuff please? Would appreciate !
Thanks man!

[shawnsheridan]

Originally Posted by GDLF.

Hey Shawn!
Could you provide the lastest version & stuff please? Would appreciate !
Thanks man!

PM sent.