02-11-2020, 08:00 PM | #1 |
New Member
2
Rep 20
Posts
Drives: F30/N55
Join Date: Jul 2019
Location: Peoria, AZ
|
Horn not working after M Sport steering wheel retrofit
I replaced the base steering wheel and airbag in my 2014 335 with an M Sport wheel and airbag. Now the horn doesn't work from the steering wheel. It does work when I lock the car with the car running so it's not a bad horn. I bought the airbag from Europe and I'm wondering if I need to change a pin location for US or code it? Any suggestions?
|
02-12-2020, 01:20 PM | #2 |
Enlisted Member
5
Rep 34
Posts |
I'm guessing you need the M-sport steering wheel wiring harness. I went through this when I swapped in my m-sport steering wheel, horn didn't work until I had the correct harness.
https://www.ecstuning.com/b-genuine-...s/32307848335/ |
Appreciate
1
OR GE1.50 |
02-18-2020, 09:11 PM | #3 |
New Member
2
Rep 20
Posts
Drives: F30/N55
Join Date: Jul 2019
Location: Peoria, AZ
|
UPDATE** The new wiring harness did the trick. Thank you luckysnafu!
|
Appreciate
0
|
02-22-2020, 04:30 PM | #4 | |
Brigadier General
3041
Rep 3,010
Posts
Drives: 2019 M2 Competition
Join Date: Jan 2017
Location: Maple Valley WA
|
Quote:
__________________
Check out my BMW DIY Channel on YouTube! E, F and G series projects from Active Autowerke, Bimmertech, Kies Motorsports, AvinUSA, Karbonius Composites and more!
** YouTube BMW DIY Guy ** 'Nimona' G87 M2 Build Thread 'Lillith' F87 M2 Competition Build Thread |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|