[thebadboy]

Originally Posted by shawnsheridan

Only if you have NBT Head Unit.

shit, lol, my brother has the NBT. or does it go for coding the video from the usb



you reply to all. hihi

[shawnsheridan]

Originally Posted by thebadboy

shit, lol, my brother has the NBT. or does it go for coding the video from the usb

you reply to all. hihi

I do not understand what you write. Your brother can Code Video over USB if he has NBT.

[thebadboy]

yes, my brother has NBT,

how to enable usb video, ca is or?

HI-NBT CAFD ==>?

[shawnsheridan]

Originally Posted by thebadboy

yes, my brother has NBT,

how to enable usb video, ca is or?

HI-NBT CAFD ==>?

In NBT, code the following:

API_USB_VIDEO = both
ENT_CODEC_OGG = aktiv
ENT_CODEC_VCD = aktiv
ENT_CODEC_XVID = aktiv
ENT_MC_VIDEO_SUPPORT = aktiv
ENT_MC_WLAN_STREAM_DMP = aktiv
ENT_MC_WLAN_STREAM_DMP_COVERART = aktiv
ENT_MC_WLAN_STREAM_DMP_VIDEO = aktiv

[thebadboy]

Originally Posted by shawnsheridan

In NBT, code the following:

API_USB_VIDEO = both
ENT_CODEC_OGG = aktiv
ENT_CODEC_VCD = aktiv
ENT_CODEC_XVID = aktiv
ENT_MC_VIDEO_SUPPORT = aktiv
ENT_MC_WLAN_STREAM_DMP = aktiv
ENT_MC_WLAN_STREAM_DMP_COVERART = aktiv
ENT_MC_WLAN_STREAM_DMP_VIDEO = aktiv

I can only say, thank you chef

[digitallust]

Originally Posted by Puri1

Hey can you please let us know the exact steps to get the fog lamps for cornering active like you did ? Thanks man..

Can anyone help me with doing the same with mine... would like to activate cornering lights aswell, Cheers, Matt

[zibawal]

can some one help me code LCI on M3 E93?

[shawnsheridan]

Originally Posted by zibawal

can some one help me code LCI on M3 E93?

What is it you need? Software or guidance?

[zibawal]

Originally Posted by shawnsheridan

What is it you need? Software or guidance?

Both man

[shawnsheridan]

Originally Posted by zibawal

Both man

I can help you with the tools. PM sent.

I don't do any Exx Coding though, so I wont be of any use to you for Guidance.

[thebadboy]

-how coding>> Fog lights come on at unlock with welcome lights


-Also, is it possible to increase the sensibilté sensor wipers, because it goes too slowly



thank you

[baseinfinity]

Going in for a mid cycle oil change tomorrow, not sure if they're going to update my car or not. Getting first post out of the way so that I can receive PMs in case I need to get a token for 3.22.5.

Anyone know the odds that they'll flash it? I'm @ F020-12-11-502 / 48.1 right now.

[shawnsheridan]

Originally Posted by baseinfinity

Going in for a mid cycle oil change tomorrow, not sure if they're going to update my car or not. Getting first post out of the way so that I can receive PMs in case I need to get a token for 3.22.5.

Anyone know the odds that they'll flash it? I'm @ F020-12-11-502 / 48.1 right now.

For an oil change only, it won't be programmed.

If while it is there though, there are also applicable Service Bulletins that they decide to apply to your car, and one of those SIB's calls for programming the car with an ISTA/P Level higher than your car currently has on it, then it will be programmed too.

[shawnsheridan]

Originally Posted by thebadboy

-how coding>> Fog lights come on at unlock with welcome lights

-Also, is it possible to increase the sensibilté sensor wipers, because it goes too slowly

thank you

For F10, Fogs lights on with Welcome Lights is:

FRM => WL_FUNKTION_NSW = soft_on or hard_on.

Maybe F30 has the same or similar code in FEM_BODY.

[TheDukeYYC]

Looking to program mine (remove chimes, auto lock of doors) - Where can I get a proper cable and the software?

Also - Can this cable DISABLE the tire pressure monitoring? I want to run winter tires on separate rims without buying TPMS sending units...

[TheDukeYYC]

Originally Posted by shawnsheridan

HU_CIC => RDC_SAFETY = aktiv.

Requires Option 2VB.

If I deactivate this option (once I get my cable and software!), will this allow me to run my winter tires and rims without tire pressure senders in the winter rims, and not throw an error code? F30 - no NBT.

[thebadboy]

Originally Posted by shawnsheridan

For F10, Fogs lights on with Welcome Lights is:

FRM => WL_FUNKTION_NSW = soft_on or hard_on.

Maybe F30 has the same or similar code in FEM_BODY.

I'll look for the fog lights, thank you


an idea for the sensitivity of the sensor wiper

[shawnsheridan]

Originally Posted by TheDukeYYC

If I deactivate this option (once I get my cable and software!), will this allow me to run my winter tires and rims without tire pressure senders in the winter rims, and not throw an error code? F30 - no NBT.

I doubt it. We had an F10 where we completely removed all TPMS Coding (2VB, ICM, etc.), and could not kill TPMS. In the end, the Fuse had to be removed.

[shawnsheridan]

Originally Posted by thebadboy

I'll look for the fog lights, thank you

an idea for the sensitivity of the sensor wiper

I have no idea, otherwise I would have made a suggestion for it too.

[Frogman]

Originally Posted by TheDukeYYC

Looking to program mine (remove chimes, auto lock of doors) - Where can I get a proper cable and the software?

Also - Can this cable DISABLE the tire pressure monitoring? I want to run winter tires on separate rims without buying TPMS sending units...

The auto-locking of the doors can be changed in iDrive.

Settings -> Locks.

[thebadboy]

thank you all,

I managed to activate bmw live and internet.

By cons I activate ConnectedDrive but it will not, I do not know why

[shawnsheridan]

Originally Posted by thebadboy

thank you all,

I managed to activate bmw live and internet.

By cons I activate ConnectedDrive but it will not, I do not know why

Do you have a 9C FSC Enabling Code Imported and Activated in Head Unit for 6NR BMW Apps?