BMW F30 3 Series Coding DIY - Code Auto Start Stop, DVD, Folding Mirrors, Etc.

shawnsheridan · 03-03-2020, 04:49 PM

Quote:

Originally Posted by mvallido

I already have the cable and laptop. Can somebody please send me the link to the files that I will need for Windows 10 OS. Thanks so much.

PM sent.

duunoit · 03-04-2020, 09:32 AM

Can I get the software link also? Thanks!

shawnsheridan · 03-04-2020, 10:22 AM

Quote:

Originally Posted by duunoit

Can I get the software link also? Thanks!

PM sent.

320dgrey · 03-11-2020, 05:47 PM

Is it correct that cheatsheets are not made anymore and there is an alternative to these cheatsheets?

i found it in this post:
https://www.bimmerfest.com/forums/sh....php?t=1227585

how does the XML file open/read work?

Another question(maybe not in the correct topic):
i want to fold/unfold the mirrors when i shortly press my open/close button on the key. is that possible? the car has the folding mirrors option with the specific button in the mirror/window console.
i don't mean the comfort close where i have to keep the buttons pressed for a few seconds. just when i simply press the button once to open/close my car i want the mirrors to fold/unfold also.

shawnsheridan · 03-11-2020, 07:01 PM

Quote:

Originally Posted by 320dgrey

Is it correct that cheatsheets are not made anymore and there is an alternative to these cheatsheets?

i found it in this post:
https://www.bimmerfest.com/forums/sh....php?t=1227585

how does the XML file open/read work?

Another question(maybe not in the correct topic):
i want to fold/unfold the mirrors when i shortly press my open/close button on the key. is that possible? the car has the folding mirrors option with the specific button in the mirror/window console.
i don't mean the comfort close where i have to keep the buttons pressed for a few seconds. just when i simply press the button once to open/close my car i want the mirrors to fold/unfold also.

Integrated Cheat Codes: E-Sys Launcher V2.4.x:
https://www.bimmerfest.com/forums/sh...d.php?t=874588

All you can code is the delay before folding starts to 0 though, so you press and hold it for only about 1 second before they fold.

m4_short · 03-11-2020, 08:25 PM

Shawn,

I tried to PM you but I'm a new BMW owner and new to the forum so I can't PM until I make a couple posts..

This may seem like an odd request I'm looking for a UPDXXXXX.bin file that comes from one of the aftermarket USB websites (such as bimmer-tech, bmweasycoding, DVDInMotion, ebay, etc) Do you, or anyone else, have one laying around I can look at?

I know it won't work with my car as those files are locked to the VIN but I wanted to take a quick look at one.

Thanks

shawnsheridan · 03-11-2020, 09:15 PM

Quote:

Originally Posted by m4_short

Shawn,

I tried to PM you but I'm a new BMW owner and new to the forum so I can't PM until I make a couple posts..

This may seem like an odd request I'm looking for a UPDXXXXX.bin file that comes from one of the aftermarket USB websites (such as bimmer-tech, bmweasycoding, DVDInMotion, ebay, etc) Do you, or anyone else, have one laying around I can look at?

I know it won't work with my car as those files are locked to the VIN but I wanted to take a quick look at one.

Thanks

PM sent.

sliding · 03-12-2020, 12:17 AM

i have the cable and laptop. Can somebody please send me the link to the files that I will need for Windows 10 OS. Thanks so much.

shawnsheridan · 03-12-2020, 07:16 AM

Quote:

Originally Posted by sliding

i have the cable and laptop. Can somebody please send me the link to the files that I will need for Windows 10 OS. Thanks so much.

PM sent.

Teecue · 03-13-2020, 12:08 AM

Hello Shawn,

What would be the simplest way to code a HU with 6.5" display to work with a 8.8" display? I have read that there are only two lines of code that need to be changed. I have not bought any cable or OBD connector. After reading many posts in different forums , I have some idea about the different software options but need some direction from the experienced folks like you.

Here are the details:

Looking to install an MMI in 328xi (F30)
Car production date: 5/27/2015
Current HU: Entry Nav
Screen: 6.5"(NO Navigation)
Used screen bought: 8.8"

Laptop: windows 10, only USB port available or MacBook

Thanks

320dgrey · 03-13-2020, 12:43 PM

Quote:

Originally Posted by shawnsheridan

All you can code is the delay before folding starts to 0 though, so you press and hold it for only about 1 second before they fold.

Which option do i have to code for this?

shawnsheridan · 03-13-2020, 01:07 PM

Quote:

Originally Posted by 320dgrey

Which option do i have to code for this?

In FEM_BODY:

KOMFORT_SCHLIESSEN => Werte=00
KOMFORT_OEFFNEN => Werte=00

320dgrey · 03-13-2020, 06:18 PM

Quote:

Originally Posted by shawnsheridan

In FEM_BODY:

KOMFORT_SCHLIESSEN => Werte=00
KOMFORT_OEFFNEN => Werte=00

Found it! Works perfectly now

But i don't see the cheats in E-sys. The window is there but it's empty.

Again a big thank you!

shawnsheridan · 03-13-2020, 06:18 PM

Quote:

Originally Posted by 320dgrey

Found it! Works perfectly now

Again a big thank you!

Teecue · 03-14-2020, 02:10 PM

Quote:

Originally Posted by Teecue

Hello Shawn,

What would be the simplest way to code a HU with 6.5" display to work with a 8.8" display? I have read that there are only two lines of code that need to be changed. I have not bought any cable or OBD connector. After reading many posts in different forums , I have some idea about the different software options but need some direction from the experienced folks like you.

Here are the details:

Looking to install an MMI in 328xi (F30)
Car production date: 5/27/2015
Current HU: Entry Nav
Screen: 6.5"(NO Navigation)
Used screen bought: 8.8"

Laptop: windows 10, only USB port available or MacBook

Thanks

Just wanted some input on the simplest combination of cable, OBD module and software which will work with Windows 10 (no rj45 jack). Any system that will work on the MacBook?

Is there a USB cable available that connects to the OBD? If not, then would an adapter work?

I understand that you have to change two lines of code to activate the widescreen mode.

Can I do this with Bimmercode or do I need to get
Esys with the Ethernet cable?
I can read through the many forums and try to figure it out, but was hoping for some suggestions from other's experiences to start in the right direction.

///F30 · 03-14-2020, 08:22 PM

Hey Shawn may I please get the Esys download links

shawnsheridan · 03-14-2020, 08:49 PM

Quote:

Originally Posted by Teecue

Just wanted some input on the simplest combination of cable, OBD module and software which will work with Windows 10 (no rj45 jack). Any system that will work on the MacBook?

Is there a USB cable available that connects to the OBD? If not, then would an adapter work?

I understand that you have to change two lines of code to activate the widescreen mode.

Can I do this with Bimmercode or do I need to get
Esys with the Ethernet cable?
I can read through the many forums and try to figure it out, but was hoping for some suggestions from other's experiences to start in the right direction.

No idea on Bimmercode. Never used it.

You can do it with a Windows PC using E-Sys and an ENET Cable. If you have no LAN Port, you can use a USB x LAN Adapter.

shawnsheridan · 03-14-2020, 08:51 PM

Quote:

Originally Posted by ///F30

Hey Shawn may I please get the Esys download links

PM sent.

Teecue · 03-15-2020, 08:46 AM

Quote:

Originally Posted by shawnsheridan

Quote:

Originally Posted by Teecue

Just wanted some input on the simplest combination of cable, OBD module and software which will work with Windows 10 (no rj45 jack). Any system that will work on the MacBook?

Is there a USB cable available that connects to the OBD? If not, then would an adapter work?

I understand that you have to change two lines of code to activate the widescreen mode.

Can I do this with Bimmercode or do I need to get
Esys with the Ethernet cable?
I can read through the many forums and try to figure it out, but was hoping for some suggestions from other's experiences to start in the right direction.

No idea on Bimmercode. Never used it.

You can do it with a Windows PC using E-Sys and an ENET Cable. If you have no LAN Port, you can use a USB x LAN Adapter.

Thank you.
Link for E-sys please.

shawnsheridan · 03-15-2020, 10:38 AM

Quote:

Originally Posted by Teecue

Thank you.
Link for E-sys please.

PM sent.

chris9208 · 03-15-2020, 10:54 AM

Hi, would appreciate the latest E-Sys and data too. Thanks in advance

janea1207 · 03-15-2020, 11:22 AM

Hi guys! My 340i shows on dashboard (black panel) maximum speed 263km/h. Car goes to 300km/h but on dashboard stay 263. Who knows what exactly need to code for remove this limit?
Thanks!

03-04-2020, 09:32 AM	#15204
duunoit Registered 0 Rep 2 Posts Drives: 2017 330e Join Date: Feb 2020 Location: Knoxville, TN iTrader: (0)	Can I get the software link also? Thanks!
	Appreciate 0 Quote

03-11-2020, 05:47 PM	#15206
320dgrey New Member 0 Rep 24 Posts Drives: BMW 320d Join Date: Nov 2019 Location: Netherlands iTrader: (0)	Is it correct that cheatsheets are not made anymore and there is an alternative to these cheatsheets? i found it in this post: https://www.bimmerfest.com/forums/sh....php?t=1227585 how does the XML file open/read work? Another question(maybe not in the correct topic): i want to fold/unfold the mirrors when i shortly press my open/close button on the key. is that possible? the car has the folding mirrors option with the specific button in the mirror/window console. i don't mean the comfort close where i have to keep the buttons pressed for a few seconds. just when i simply press the button once to open/close my car i want the mirrors to fold/unfold also. Last edited by 320dgrey; 03-11-2020 at 05:55 PM..
	Appreciate 0 Quote

03-11-2020, 08:25 PM	#15208
m4_short Registered 0 Rep 2 Posts Drives: M4 Join Date: Mar 2020 Location: US-East iTrader: (0)	Shawn, I tried to PM you but I'm a new BMW owner and new to the forum so I can't PM until I make a couple posts.. This may seem like an odd request I'm looking for a UPDXXXXX.bin file that comes from one of the aftermarket USB websites (such as bimmer-tech, bmweasycoding, DVDInMotion, ebay, etc) Do you, or anyone else, have one laying around I can look at? I know it won't work with my car as those files are locked to the VIN but I wanted to take a quick look at one. Thanks
	Appreciate 0 Quote

03-12-2020, 12:17 AM	#15210
sliding Registered 0 Rep 3 Posts Drives: bmw x5 Join Date: Mar 2020 Location: sydney iTrader: (0)	i have the cable and laptop. Can somebody please send me the link to the files that I will need for Windows 10 OS. Thanks so much.
	Appreciate 0 Quote

03-13-2020, 12:08 AM	#15212
Teecue New Member 0 Rep 7 Posts Drives: F30 Join Date: Feb 2020 Location: MO iTrader: (0)	Hello Shawn, What would be the simplest way to code a HU with 6.5" display to work with a 8.8" display? I have read that there are only two lines of code that need to be changed. I have not bought any cable or OBD connector. After reading many posts in different forums , I have some idea about the different software options but need some direction from the experienced folks like you. Here are the details: Looking to install an MMI in 328xi (F30) Car production date: 5/27/2015 Current HU: Entry Nav Screen: 6.5"(NO Navigation) Used screen bought: 8.8" Laptop: windows 10, only USB port available or MacBook Thanks
	Appreciate 0 Quote

03-14-2020, 08:22 PM	#15218
///F30 Registered 0 Rep 1 Posts Drives: F30 Join Date: Mar 2020 Location: Sweden iTrader: (0)	Esys Hey Shawn may I please get the Esys download links
	Appreciate 0 Quote

03-15-2020, 10:54 AM	#15223
chris9208 New Member 0 Rep 6 Posts Drives: 435d xDrive M-Sport Join Date: Nov 2016 Location: UK iTrader: (0)	Hi, would appreciate the latest E-Sys and data too. Thanks in advance
	Appreciate 0 Quote

03-15-2020, 11:22 AM	#15224
janea1207 Private First Class 29 Rep 135 Posts Drives: BMW 340i Join Date: Jun 2019 Location: France iTrader: (0)	bmw 340i Hi guys! My 340i shows on dashboard (black panel) maximum speed 263km/h. Car goes to 300km/h but on dashboard stay 263. Who knows what exactly need to code for remove this limit? Thanks!
	Appreciate 0 Quote