Is it possible to clear check engine codes with Esys / an ENET cable?

shawnsheridan · 01-21-2018, 11:56 AM

Quote:

Originally Posted by vfx19

Hi Shawn,
Could send me the last tool32? I would like to clear the passenger restraint fault. Tried esys transmitter but fault still there. Thanks

PM sent.

flopyro · 01-22-2018, 02:07 AM

Hello, I am a complete newby to BMW / BMW coding
Thank you for support in this forum.
Yesterday i have retrofitted Cruise Control on my F20, an also coded it.
Of course the first time i had forgot to turn on the engine, and my car went to sleep mode durring the flash process so i flashed my ECU with corupt data, but saved afterwards with this trick : http://f30.bimmerpost.com/forums/sho....php?t=1090133
and then i was able to add the SA: 544 and code the FEM, ICM and KOMBI in order to have Cruise Control.
But durring the coding process i have received a lot of DTC's that where shown in the Instrument Cluster and in the Radio Professional. (which dissapeared after an ignition change)
Now i would like to see what DTC's are on my car and delete them.
well actually....just delete them --> will it work with E-SYS (without any risks)?
(like described in post #50?
Click "External Applications" in the left menu.
Click "External Application"
Double-click "Transmitter"
Scroll to the bottom and double-click "... Clear all DTCs ...")

Or do i need the "EDIABAS/tool32" ?
and if I need it .... could you please also send me a PM ?

even if you don't have time to send it to me, i would like to Thank you for you work on this forum !

shawnsheridan · 01-22-2018, 06:54 AM

Quote:

Originally Posted by flopyro

Hello, I am a complete newby to BMW / BMW coding
Thank you for support in this forum.
Yesterday i have retrofitted Cruise Control on my F20, an also coded it.
Of course the first time i had forgot to turn on the engine, and my car went to sleep mode durring the flash process so i flashed my ECU with corupt data, but saved afterwards with this trick : http://f30.bimmerpost.com/forums/sho....php?t=1090133
and then i was able to add the SA: 544 and code the FEM, ICM and KOMBI in order to have Cruise Control.
But durring the coding process i have received a lot of DTC's that where shown in the Instrument Cluster and in the Radio Professional. (which dissapeared after an ignition change)
Now i would like to see what DTC's are on my car and delete them.
well actually....just delete them --> will it work with E-SYS (without any risks)?
(like described in post #50?
Click "External Applications" in the left menu.
Click "External Application"
Double-click "Transmitter"
Scroll to the bottom and double-click "... Clear all DTCs ...")

Or do i need the "EDIABAS/tool32" ?
and if I need it .... could you please also send me a PM ?

even if you don't have time to send it to me, i would like to Thank you for you work on this forum !

You can clear with E-Sys.

d_a_m · 02-05-2018, 11:13 AM

Hey shawnsheridan ,

I'm also trying to clear the airbag error and Low Beam malfunctions for LED headlights that were installed on my buddy's F30. Can this be done on e-sys or, as the previous comments, I'd like to request the latest tool32.

p.s. - I'm working on e-sys via a VM as specified on the ******* site. Not sure if there are different instructions needed for this.

Thanks in advance!

David

shawnsheridan · 02-05-2018, 11:26 AM

Quote:

Originally Posted by d_a_m

Hey shawnsheridan ,

I'm also trying to clear the airbag error and Low Beam malfunctions for LED headlights that were installed on my buddy's F30. Can this be done on e-sys or, as the previous comments, I'd like to request the latest tool32.

p.s. - I'm working on e-sys via a VM as specified on the ******* site. Not sure if there are different instructions needed for this.

Thanks in advance!

David

I can only advise to try with E-Sys, and if it does not work, then try Tool32. PM sent.

PhantomF30 · 02-06-2018, 02:25 PM

Quote:

Originally Posted by shawnsheridan

I can only advise to try with E-Sys, and if it does not work, then try Tool32. PM sent.

Shawn, I’ve tried to reset my brake warning with e-say with no luck. Can you please pm me a copy of tool32? Thanks in advance.

shawnsheridan · 02-06-2018, 04:00 PM

Quote:

Originally Posted by PhantomF30

Shawn, I’ve tried to reset my brake warning with e-say with no luck. Can you please pm me a copy of tool32? Thanks in advance.

PM sent.

Johnny250 · 02-14-2018, 12:12 AM

Can anyone in here send me a link to download tool32?

shawnsheridan · 02-14-2018, 09:07 AM

Quote:

Originally Posted by Johnny250

Can anyone in here send me a link to download tool32?

I replied to your same PM.

madmunky · 02-20-2018, 07:44 AM

Hi Shawn,

Any chance in getting EDIABAS I need to try clear some codes

shawnsheridan · 02-20-2018, 07:47 AM

Quote:

Originally Posted by madmunky

Hi Shawn,

Any chance in getting EDIABAS I need to try clear some codes

PM sent.

madmunky · 02-20-2018, 10:05 AM

Thanks Shawn

Got it and managed to clear my codes. I've never used my ENET cable before are there any guides on using Tool32?

shawnsheridan · 02-20-2018, 10:19 AM

Quote:

Originally Posted by madmunky

Thanks Shawn

Got it and managed to clear my codes. I've never used my ENET cable before are there any guides on using Tool32?

None I have ever seen.

madmunky · 02-20-2018, 11:01 AM

Quote:

Originally Posted by shawnsheridan

None I have ever seen.

How do you know what any of the menus mean or what each of the files do?
(sorry newbie)

shawnsheridan · 02-20-2018, 11:06 AM

Quote:

Originally Posted by madmunky

How do you know what any of the menus mean or what each of the files do?
(sorry newbie)

Trial and Error, Google, Phone a Friend, etc.

madmunky · 02-20-2018, 11:35 AM

Quote:

Originally Posted by shawnsheridan

Trial and Error, Google, Phone a Friend, etc.

Can anything in there brick the ECU by just querying them?

shawnsheridan · 02-20-2018, 01:27 PM

Quote:

Originally Posted by madmunky

Can anything in there brick the ECU by just querying them?

Tool32 is powerful. I'd be careful. If you are just doing read (Lessen) functions, you should be fine.

Thyrus · 03-14-2018, 07:47 AM

shawnsheridan Same for me please I could use the link for Tool32 to clear errors pls.

shawnsheridan · 03-14-2018, 08:32 AM

Quote:

Originally Posted by Thyrus

shawnsheridan Same for me please I could use the link for Tool32 to clear errors pls.

PM sent.

GuMiMoRo · 03-22-2018, 06:53 AM

Hello could you send me the last tool32?

I would like to try to wake up BMW apps and live
thanks

shawnsheridan · 03-22-2018, 06:55 AM

Quote:

Originally Posted by GuMiMoRo

Hello could you send me the last tool32?

I would like to try to wake up BMW apps and live
thanks

PM sent.

GuMiMoRo · 03-22-2018, 06:58 AM

I try run lesen_provisioning_data but:

apiJob("NBT","lesen_provisioning_data","","")

Satz : 0
OBJECT = nbt
SAETZE = 1
JOBNAME = lesen_provisioning_data
VARIANTE = NBT
JOBSTATUS =
UBATTCURRENT = -1
UBATTHISTORY = -1
IGNITIONCURRENT = -1
IGNITIONHISTORY = -1
Satz : 1
RET_STATUS = 255 FF ÿ
JOB_STATUS = ERROR_ARG_TYPE

any suggestion how to solve this?

01-22-2018, 02:07 AM	#420
flopyro Registered 0 Rep 1 Posts Drives: F20 Join Date: Jan 2018 Location: Germany iTrader: (0)	Hello, I am a complete newby to BMW / BMW coding Thank you for support in this forum. Yesterday i have retrofitted Cruise Control on my F20, an also coded it. Of course the first time i had forgot to turn on the engine, and my car went to sleep mode durring the flash process so i flashed my ECU with corupt data, but saved afterwards with this trick : http://f30.bimmerpost.com/forums/sho....php?t=1090133 and then i was able to add the SA: 544 and code the FEM, ICM and KOMBI in order to have Cruise Control. But durring the coding process i have received a lot of DTC's that where shown in the Instrument Cluster and in the Radio Professional. (which dissapeared after an ignition change) Now i would like to see what DTC's are on my car and delete them. well actually....just delete them --> will it work with E-SYS (without any risks)? (like described in post #50? Click "External Applications" in the left menu. Click "External Application" Double-click "Transmitter" Scroll to the bottom and double-click "... Clear all DTCs ...") Or do i need the "EDIABAS/tool32" ? and if I need it .... could you please also send me a PM ? even if you don't have time to send it to me, i would like to Thank you for you work on this forum !
	Appreciate 0 Quote

02-05-2018, 11:13 AM	#422
d_a_m Private First Class 93 Rep 177 Posts Drives: 2013 BMW 328i Join Date: May 2017 Location: Houston, TX iTrader: (0)	Hey shawnsheridan , I'm also trying to clear the airbag error and Low Beam malfunctions for LED headlights that were installed on my buddy's F30. Can this be done on e-sys or, as the previous comments, I'd like to request the latest tool32. p.s. - I'm working on e-sys via a VM as specified on the ******* site. Not sure if there are different instructions needed for this. Thanks in advance! David __________________ ///437m wheels///Depo Headlights ///3M 1080 Carbon Fiber Interior Wrap///M-Sport Bumper Conversion///Dinan Suspension///M-Style Kidney Grilles "If we knew what it was we were doing, it would not be called research, would it?"
	Appreciate 0 Quote

02-14-2018, 12:12 AM	#426
Johnny250 Colonel 1043 Rep 2,152 Posts Drives: 328d Wagon Join Date: Apr 2012 Location: Los Angeles iTrader: (38)	Can anyone in here send me a link to download tool32?
	Appreciate 0 Quote

02-20-2018, 07:44 AM	#428
madmunky Private 15 Rep 87 Posts Drives: F31 335d Join Date: Nov 2017 Location: UK iTrader: (0)	Hi Shawn, Any chance in getting EDIABAS I need to try clear some codes
	Appreciate 0 Quote

02-20-2018, 10:05 AM	#430
madmunky Private 15 Rep 87 Posts Drives: F31 335d Join Date: Nov 2017 Location: UK iTrader: (0)	Thanks Shawn Got it and managed to clear my codes. I've never used my ENET cable before are there any guides on using Tool32?
	Appreciate 0 Quote

03-14-2018, 07:47 AM	#436
Thyrus Enlisted Member 15 Rep 35 Posts Drives: F36 430xi Moonstone Join Date: Sep 2006 Location: VIENNA iTrader: (0)	shawnsheridan Same for me please I could use the link for Tool32 to clear errors pls. __________________ F36 430xi Gran Coupe Moonstone/Individual interior
	Appreciate 0 Quote

03-22-2018, 06:53 AM	#438
GuMiMoRo Private 4 Rep 77 Posts Drives: F31 Join Date: Feb 2015 Location: Portugal iTrader: (0)	Hello could you send me the last tool32? I would like to try to wake up BMW apps and live thanks
	Appreciate 0 Quote

03-22-2018, 06:58 AM	#440
GuMiMoRo Private 4 Rep 77 Posts Drives: F31 Join Date: Feb 2015 Location: Portugal iTrader: (0)	I try run lesen_provisioning_data but: apiJob("NBT","lesen_provisioning_data","","") Satz : 0 OBJECT = nbt SAETZE = 1 JOBNAME = lesen_provisioning_data VARIANTE = NBT JOBSTATUS = UBATTCURRENT = -1 UBATTHISTORY = -1 IGNITIONCURRENT = -1 IGNITIONHISTORY = -1 Satz : 1 RET_STATUS = 255 FF ÿ JOB_STATUS = ERROR_ARG_TYPE any suggestion how to solve this?
	Appreciate 0 Quote