04-12-2018, 09:26 PM | #1 |
Enlisted Member
0
Rep 30
Posts |
Will these work???
Hello,
I just found an awesome deal on some forged wheels with Toyo tires and I want to buy the setup! I am just not if they are too wide and I am not sure of the offset. I have a 2014 328i. And I want to put on these wheels and tires.. Front: 19 X 9 +22 225/35/19 Back: 19 X 10 +24 275/35/19 Thank you guys so much |
04-13-2018, 09:10 AM | #2 |
Colonel
850
Rep 2,771
Posts |
Depends on how low you are and how much negative camber you feel comfortable running. The rears are a bit aggressive for that tire size. These will not be a bolt on fit at all.
I run 9.5 et25 rears with a 255/35/19 tire. I'm fairly low and run -2.4 camber. I could fit a 275/35 but I'd need full -3 camber to do it. Those wheels are also about 15-20mm more aggressive than mine are. Drop down to 245/35 and they may work at -3.5 maxing out the camber arms. Best of luck. |
Appreciate
0
|
04-13-2018, 05:54 PM | #3 |
Lieutenant
377
Rep 421
Posts
Drives: 2017 F31 328dx
Join Date: Mar 2017
Location: Upstate NY
|
I don't think those 19x10's will work in the rear with a 24 offset. I just ordered 19x10 and they're doing +38 offset on 265/30/19. According to wheel calculators it'll be about 1/16 of an inch inside the fender compared to around 5/16th of inch with OEM. With that +24 you're looking at just a little past 1/2".
|
Appreciate
0
|
04-14-2018, 12:18 AM | #5 |
Brigadier General
3078
Rep 4,329
Posts |
this set up is too aggressive for someone that is uninformed about slammed/stanced setups. please review this thread.
http://f30.bimmerpost.com/forums/sho...d.php?t=909786 my opinion for you in, NOT to get these. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|