[Var]

I have a leased 2019 440i with M-Sport. I have 2 issues I want to solve at the same time.

- I don't want to wear out these factory run-flats and then have to buy a new set. So I figured I would take them off and save them for when it is time to return the car

- I don't like how the car handles with the staggered setup so I want to switch to square setup with Michelin PS4 245/40/19 all around. These tires will be 1/2 inch taller overall than factory.


I actually really like the look of the factory wheels, but I'm not sure what style designation they have. So the cheapest conceivable way to do this is if I could fit a factory rear wheel on the front.

So my first 2 questions are:

1- what wheel style and offset are these? They are 19s
2- if I buy an extra set of rears can I fit them in the front?


If that won't work because of offset reasons, then my second option is a set of Apex Arc-8s. Will the 19x9+30 fit the car? I want maximum poke without having to deal with rubbing issues. I'm willing to add some negative front camber if there is a factory adjustment for it.

Thanks!

[Gen13 F36]

704m wheels
19x8 +34
19x8.5 +47

[wdeerfield]

The rears will not fit the front without at least a 7mm spacer

[Var]

Originally Posted by wdeerfield

The rears will not fit the front without at least a 7mm spacer

I'm already running 20mm front and 25mm rear. So essentially I can keep the front 20mm spacer and will be good to go?

[k4sh_90]

You can use willtheyfit.com to see how far off the new set up (wheel and tire) will be from your current set up

[Var]

Jesus these wheels used are more expensive than aftermarket ones new..Maybe Apex it is then

[Gen13 F36]

Originally Posted by Var

Jesus these wheels used are more expensive than aftermarket ones new..Maybe Apex it is then