[speed4tw]

I'm new to bimmercode and wasn't able to find on how to make the fog light to turn on when the low beam or high beam is on. It gets annoying to press the button all the time when its dark out.

[Billfitz]

You'd find that option, if it exists, in the E-Sys cheat sheets, which you'd have to code using expert mode.

[speed4tw]

I tried with the cheat sheet and it didn't work, could it be because I have the lci fog lights?

[speed4tw]

The code below didnt work for me

FEM_BODY 3073 C_CLC_ENA F030enable F030disable Enables cornering light
FEM_BODY 3073 C_BLC_ENA aktiv nicht_aktiv Enables cornering lights
FEM_BODY 3066 KL_ENABLE_LI KL_Ein KL_Aus Enables cornering lights
FEM_BODY 3073 KL_ENABLE_RE KL_Ein KL_Aus Enables cornering lights
FEM_BODY 3062 MAPPING_abbiegel_L_output nsw_l Off Enables cornering lights
FEM_BODY 3062 MAPPING_abbiegel_R_output nsw_r Off Enables cornering lights
FEM_BODY 3060 LCE_MASTER NSW_EIN_AUF_LDS_STL output aktiv

[paimon.soror]

https://www.normalexception.net/BMW-F36-DIY/f36-coding/

I've got it documented here

[dizzy619]

Fog lights are for when it's foggy...

[paimon.soror]

Head lights are for when it's headdy

[speed4tw]

Got it done. What I did was the following

FEM_BODY 3063 MAPPING_NEBELSCHW_L_FUNCTION Value 03 Default 08
FEM_BODY 3063 MAPPING_NEBELSCHW_R_FUNCTION Value 03 Default 08