10-01-2021, 06:45 PM | #1 |
Captain
373
Rep 898
Posts
Drives: F32 428i Xdrive
Join Date: Aug 2020
Location: Texas
|
Suspension Alignment questions
Hey y'all
was creating a service and purchase history book for my car and was taking a look at my previous alignment sheet from back in June. I had gotten an alignment since I hadn't had one since getting the car, as well as I had replaced my lower control arms, swapped wheels and added spacers, so thought it might have been time for one On the service receipt, it said "Further parts replacement required to correct camber issue" Having a look at the alignment values post-fix, it seems just the driver side front is just View post on imgur.com . It's not something I am actually worried about since driving the car the past few months there hasn't been a reason for me to be concerned.So onto the actual question, What needs to be replaced or what can I do to sort of fix this myself? Is this something I should be concerned about? Thanks in advance y'all! |
10-02-2021, 09:01 AM | #2 |
Major
568
Rep 1,291
Posts |
0'30'' degrees is not a big issue, but tbh it's the passenger one that should be fixed to have (at least) -0'30'', these cars are not fun to drive with zero camber :-/
__________________
2017 M550i | Sophistograu
Previous cars: 2014 F30 ActiveHybrid 3 | 2012 f20 M135i |
Appreciate
1
djacinto373.00 |
10-02-2021, 09:17 AM | #3 |
New Member
8
Rep 25
Posts |
It sounds like you might benefit from K-Mac's front adjustable camber bushing.
https://www.vividracing.com/kmac-fro...152459126.html |
Appreciate
1
djacinto373.00 |
10-02-2021, 09:34 AM | #4 | |
Captain
373
Rep 898
Posts
Drives: F32 428i Xdrive
Join Date: Aug 2020
Location: Texas
|
Quote:
The car has been much better to drive since replacing the leaking lca's but I know it could be better, like you said, with just a tad more camber!!
__________________
|
|
Appreciate
0
|
10-08-2021, 10:37 AM | #5 | |
Captain
373
Rep 898
Posts
Drives: F32 428i Xdrive
Join Date: Aug 2020
Location: Texas
|
Blank
Quote:
__________________
|
|
Appreciate
0
|
10-16-2021, 09:17 AM | #6 |
New Member
8
Rep 25
Posts |
Not sure about xdrive as I have rwd. Try to contact them and see. Sorry I couldn't be any help.
If the control arms have the same part number I would assume so. Another way to know is if the mounting part has the same dimensions. |
Appreciate
1
djacinto373.00 |
10-16-2021, 09:56 AM | #7 | |
Captain
373
Rep 898
Posts
Drives: F32 428i Xdrive
Join Date: Aug 2020
Location: Texas
|
Quote:
__________________
|
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|