[peterparker]

Originally Posted by gling

Hi there,

Yes the brakes are still available but these are the stock M-Sport brakes (4 pot fronts and 1 pot rears) that come unpainted on the car. These are not the colored/painted M-Performance units if those are the ones you are looking for. Let me know if you are still interested.

Best regards,

Gerald.

This sounds like the factory 335i brakes. Unpainted calipers (4 pot) with the 340mm fronts. I think the factory optioned "M brake kit" ( or whatever they call it) is with the blue calipers front and rear, 370mm rotor up front.

GLWS!

[gling]

Bump. Can deliver anywhere along the Boston - Philadelphia route if needed.

[gling]

Bump!

[gling]

Bump with lowered price!

[gling]

Bump!

[disgruntledcow]

Originally Posted by peterparker

This sounds like the factory 335i brakes. Unpainted calipers (4 pot) with the 340mm fronts. I think the factory optioned "M brake kit" ( or whatever they call it) is with the blue calipers front and rear, 370mm rotor up front.

GLWS!

Correct, only Blue M sport brakes are 370mm.

[ProAktion]

You still holdin these? I am interested.

[gling]

Bump!

[gling]

Bump!

[AMSWagon]

Are these the ones stamp Brembo?

[hevykevy420]

Originally Posted by gling

Prefer to sell as a set at the moment.



Not sure but possibly. Maybe someone else on the forums can verify but I am not sure personally.

Rears will def not fit 328i models. Not sure if any xi owners have tried to confirm either....

http://f30.bimmerpost.com/forums/sho....php?t=1004809

[gling]

Originally Posted by AMSWagon

Are these the ones stamp Brembo?

No, these are the stock units. 4 pot calipers up front, and 1 pot in the back.

[1QuikWS6]

Originally Posted by gling

No, these are the stock units. 4 pot calipers up front, and 1 pot in the back.

The 4 piston fronts should be Brembo, rear 1 pistons are Bosch

[decre83]

how much just for front calipers?

[gling]

Bump!

[Tribalpinoy911]

Originally Posted by hevykevy420

Rears will def not fit 328i models. Not sure if any xi owners have tried to confirm either....

http://f30.bimmerpost.com/forums/sho....php?t=1004809

Wow thanks for the info, i was about to purchase these for my xdrive. Would of been disappointed if they wouldn't fit. I thought it was a simple bolt on.

[gling]

Originally Posted by hevykevy420

Rears will def not fit 328i models. Not sure if any xi owners have tried to confirm either....

http://f30.bimmerpost.com/forums/sho....php?t=1004809

Just went through the entire thread and post #36 and #44 state that the rear calipers will work with XDrive models since they use a larger diameter e-brake setup.

https://f30.bimmerpost.com/forums/sh...7&postcount=36

https://f30.bimmerpost.com/forums/sh...7&postcount=44

[hevykevy420]

Originally Posted by Tribalpinoy911

Wow thanks for the info, i was about to purchase these for my xdrive. Would of been disappointed if they wouldn't fit. I thought it was a simple bolt on.

My experience in the post I authored was strictly limited to RWD. When I researched all the part numbers back then it looked like xi models shared the rear hub/ebrake parts with the 335. As gling pointed out, it looks like a few xi folks confirmed my suspicion with actual parts, and the 4 cyl xi models can swap rear hub/ebrake parts with 335 at least according to the posts gling noted. If that is true, Tribalpinoy, you should have a direct bolt on with an xi model. Or xdrive, or whatever bmw is calling AWD these days!

and if you want the painted caliper look that the bmw option provides, take a look at the photos I provided, those calipers are simply the grey unpainted 335 calipers with high temp primer and paint out of a rattle can, bake in the oven and use some brembo vinyl labels. You can have them powdercoated if you want but the high temp paint if prepped properly holds up great as long as you prepped for paint properly and don't drizzle brake fluid all over the calipers...

[gling]

Originally Posted by hevykevy420

My experience in the post I authored was strictly limited to RWD. When I researched all the part numbers back then it looked like xi models shared the rear hub/ebrake parts with the 335. As gling pointed out, it looks like a few xi folks confirmed my suspicion with actual parts, and the 4 cyl xi models can swap rear hub/ebrake parts with 335 at least according to the posts gling noted. If that is true, Tribalpinoy, you should have a direct bolt on with an xi model. Or xdrive, or whatever bmw is calling AWD these days!

and if you want the painted caliper look that the bmw option provides, take a look at the photos I provided, those calipers are simply the grey unpainted 335 calipers with high temp primer and paint out of a rattle can, bake in the oven and use some brembo vinyl labels. You can have them powdercoated if you want but the high temp paint if prepped properly holds up great as long as you prepped for paint properly and don't drizzle brake fluid all over the calipers...

For what it's worth, thanks for all your research and comments on this topic from your other post; it is people like you that make it so much easier for folks to tinker with their cars.

Gerald.

[Overshotgolem]

What’s the price ?

[gling]

Originally Posted by Overshotgolem

What’s the price ?

$650 and bump!

[whoismorggan]

Interested in the front set only. Let me know!