F30POST
F30POST
2012-2015 BMW 3-Series and 4-Series Forum
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read
BMW 3-Series and 4-Series Forum (F30 / F32) | F30POST > Technical Forums > N55 Turbo Engine / Drivetrain / Exhaust Modifications > Anyone with the Active Auto Flash tune dyno there car yet?
European Auto Source (EAS)
Post Reply
 
Thread Tools Search this Thread
      04-11-2018, 10:57 AM   #221
JaredG_F30
Lieutenant Colonel
JaredG_F30's Avatar
991
Rep
1,516
Posts

Drives: 2014 335i, M-Sport, Manual
Join Date: Dec 2016
Location: Raleigh, NC

iTrader: (0)

Logging from your mobile device with BM3 without the OBD agent is a bit of a bear. You either have to tether your mobile device to your laptop via WiFi or log from your laptop, which is what I've been doing for logging. I am building my own OBD Agent from an RPi 3 B+, about a $50 investment, but it will be awesome to log/flash wirelessly from my iPhone.

I think MHD wins in this case as it doesn't require an interstitial device, even though they don't offer wireless logging that I know of.

Quote:
Originally Posted by BMW DIY Guy View Post
I am looking into MHD right now, if they can just be used for logging, and also have an email conversation going with BM3.
__________________

2014 F30 335i, M-Sport, 6MT, V804s, custom exhaust, CTS Turbo Intake & IC, FTP CP, VRSF DP, TMS Strut Brace, BM3 Stg 2, AEM WMI, H&R Sport Springs (381 whp, 429 wtq on Cali 91oct before WMI).
SPI Films Blog/DIY Vids
Appreciate 1
      04-11-2018, 02:46 PM   #222
BMW DIY Guy
Lieutenant Colonel
875
Rep
1,614
Posts

Drives: 2014 435i
Join Date: Jan 2017
Location: Maple Valley WA

iTrader: (1)

Garage List
2014 BMW 435i  [0.00]
No wireless that I can see and about $150 in for both cable and app.
__________________
Check out my BMW DIY Channel on YouTube! F32, F80, E39, E46, E53, and E83 projects from Active Autowerke, TuningTechFS, Kies Motorsports, AvinUSA, Karbonius Composites and more!
** YouTube BMW DIY Guy ** ** Facebook BMW DIY Guy **
'Furiosa' F32 Build Thread
Appreciate 0
      04-11-2018, 02:52 PM   #223
JaredG_F30
Lieutenant Colonel
JaredG_F30's Avatar
991
Rep
1,516
Posts

Drives: 2014 335i, M-Sport, Manual
Join Date: Dec 2016
Location: Raleigh, NC

iTrader: (0)

Quote:
Originally Posted by BMW DIY Guy View Post
No wireless that I can see and about $150 in for both cable and app.
OUCH!!
__________________

2014 F30 335i, M-Sport, 6MT, V804s, custom exhaust, CTS Turbo Intake & IC, FTP CP, VRSF DP, TMS Strut Brace, BM3 Stg 2, AEM WMI, H&R Sport Springs (381 whp, 429 wtq on Cali 91oct before WMI).
SPI Films Blog/DIY Vids
Appreciate 0
      04-12-2018, 07:15 AM   #224
ceedawg
Major
ceedawg's Avatar
436
Rep
1,350
Posts

Drives: 2k15 335i xdrive MSport 6spd
Join Date: Dec 2017
Location: Big City

iTrader: (0)

Quote:
Originally Posted by GPM View Post
Just because I could, I checked the EGT this morning. The temp spiked on lift off after full boost at 1585. Boost hit 15.2 and A/F was 11-12.
I meant to ask you GPM is this stage 1?
__________________
2k15 335i Msport xdrive 6spd
Wagner Comp2 FMIC,FTP CP,stock exhaust. Fabspeed Sport catted DP, ACS springs. FBO BM3 Stg 2
Appreciate 0
      04-12-2018, 07:19 AM   #225
ceedawg
Major
ceedawg's Avatar
436
Rep
1,350
Posts

Drives: 2k15 335i xdrive MSport 6spd
Join Date: Dec 2017
Location: Big City

iTrader: (0)

Quote:
Originally Posted by BMW DIY Guy View Post
I am looking into MHD right now, if they can just be used for logging, and also have an email conversation going with BM3.
Steph any updates as far as the new tune is concerned or are we good? Will you perhaps dyno the car again any time soon?
__________________
2k15 335i Msport xdrive 6spd
Wagner Comp2 FMIC,FTP CP,stock exhaust. Fabspeed Sport catted DP, ACS springs. FBO BM3 Stg 2
Appreciate 0
      04-12-2018, 09:13 AM   #226
BMW DIY Guy
Lieutenant Colonel
875
Rep
1,614
Posts

Drives: 2014 435i
Join Date: Jan 2017
Location: Maple Valley WA

iTrader: (1)

Garage List
2014 BMW 435i  [0.00]
Quote:
Originally Posted by ceedawg View Post
Steph any updates as far as the new tune is concerned or are we good? Will you perhaps dyno the car again any time soon?
So the new build I have right now is bloody amazing.. (not sure I want to look at my MPG lately *laugh*) Nic has it dialed in really well, and my concerns about blowing my CATs I think was premature.

I need to pull more logs for AA again soon, especially if I work out my logging situation. I dont see another dyno before either 1) new DP and cat, or 2) local club dyno day on June 9th.
__________________
Check out my BMW DIY Channel on YouTube! F32, F80, E39, E46, E53, and E83 projects from Active Autowerke, TuningTechFS, Kies Motorsports, AvinUSA, Karbonius Composites and more!
** YouTube BMW DIY Guy ** ** Facebook BMW DIY Guy **
'Furiosa' F32 Build Thread
Appreciate 0
      04-12-2018, 09:41 AM   #227
GPM
Second Lieutenant
170
Rep
205
Posts

Drives: 2015 335i
Join Date: Mar 2016
Location: Arizona

iTrader: (0)

Quote:
Originally Posted by ceedawg View Post
I meant to ask you GPM is this stage 1?
Nic called it a Stage 1+ due to the other supporting mods. He said it was close to a Stage 2 but with the stock cats in mind.
__________________
Mineral Gray - Active Autowerke Stage 2 - MPerformance Suspension - VRSF CP - CTS Turbo IC - Catted Fabspeed - Akrapovic - HRE FF15
Appreciate 0
      04-12-2018, 09:52 AM   #228
ceedawg
Major
ceedawg's Avatar
436
Rep
1,350
Posts

Drives: 2k15 335i xdrive MSport 6spd
Join Date: Dec 2017
Location: Big City

iTrader: (0)

Quote:
Originally Posted by GPM View Post
Nic called it a Stage 1+ due to the other supporting mods. He said it was close to a Stage 2 but with the stock cats in mind.
So your tune maybe similar to BMW DIY guy's tune
__________________
2k15 335i Msport xdrive 6spd
Wagner Comp2 FMIC,FTP CP,stock exhaust. Fabspeed Sport catted DP, ACS springs. FBO BM3 Stg 2
Appreciate 0
      04-12-2018, 09:56 AM   #229
BMW DIY Guy
Lieutenant Colonel
875
Rep
1,614
Posts

Drives: 2014 435i
Join Date: Jan 2017
Location: Maple Valley WA

iTrader: (1)

Garage List
2014 BMW 435i  [0.00]
Quote:
Originally Posted by ceedawg View Post
So your tune maybe similar to BMW DIY guy's tune
I am guessing but very likely.. looking at what is called a stg 1.5 tune at this point, with all of the addons, but still the stock DP at this point. Still looking at doing more logging asap though.
__________________
Check out my BMW DIY Channel on YouTube! F32, F80, E39, E46, E53, and E83 projects from Active Autowerke, TuningTechFS, Kies Motorsports, AvinUSA, Karbonius Composites and more!
** YouTube BMW DIY Guy ** ** Facebook BMW DIY Guy **
'Furiosa' F32 Build Thread
Appreciate 0
      04-12-2018, 11:26 AM   #230
GPM
Second Lieutenant
170
Rep
205
Posts

Drives: 2015 335i
Join Date: Mar 2016
Location: Arizona

iTrader: (0)

Quote:
Originally Posted by ceedawg View Post
So your tune maybe similar to BMW DIY guy's tune
Yeah, it looks like our cars are similarly equipped so maybe. I'm thinking that after he gets his logging issues resolved and gets what he figures is a final tune from AA I might hit them up for an update.

I do need to keep in mind that its a lot hotter here and I'm limited to 91 octane gas.
__________________
Mineral Gray - Active Autowerke Stage 2 - MPerformance Suspension - VRSF CP - CTS Turbo IC - Catted Fabspeed - Akrapovic - HRE FF15
Appreciate 0
      04-12-2018, 01:28 PM   #231
oceanview
Lieutenant
oceanview's Avatar
Switzerland
185
Rep
572
Posts

Drives: 335i F31 RWD Autom.
Join Date: May 2013
Location: Switzerland

iTrader: (0)

Quote:
Originally Posted by BMW DIY Guy View Post
So the new build I have right now is bloody amazing.. (not sure I want to look at my MPG lately *laugh*)
Yeah, yeah, words, words.
But can you beat my 0-60 mph in 4.65 sec?

If so I need a 1.5 patch from Nic too
__________________
335i F31 RWD in SB | Active Autowerke Flash Tune | 18" M-Perf Brake orange | 20" 405M | Quaife LSD | Cyba 3.5" Carbon tips | Rear M-Diffusor | Wiechers Strut Bar | Finally done: AA Charge Pipe, AA FMIC, GFB DV+
Appreciate 0
      04-12-2018, 04:00 PM   #232
ceedawg
Major
ceedawg's Avatar
436
Rep
1,350
Posts

Drives: 2k15 335i xdrive MSport 6spd
Join Date: Dec 2017
Location: Big City

iTrader: (0)

Lol I only wish there was a bigger body of work concerning this tune! Guess have to be patient.

BMW DIY Guy mentions 17.8 psi,thats some power right there folks for sure!!
__________________
2k15 335i Msport xdrive 6spd
Wagner Comp2 FMIC,FTP CP,stock exhaust. Fabspeed Sport catted DP, ACS springs. FBO BM3 Stg 2
Appreciate 0
      04-12-2018, 04:44 PM   #233
BMW DIY Guy
Lieutenant Colonel
875
Rep
1,614
Posts

Drives: 2014 435i
Join Date: Jan 2017
Location: Maple Valley WA

iTrader: (1)

Garage List
2014 BMW 435i  [0.00]
Quote:
Originally Posted by oceanview View Post
Yeah, yeah, words, words.
But can you beat my 0-60 mph in 4.65 sec?

If so I need a 1.5 patch from Nic too
Great question on the 0-60.. I am going to try to make some of the track days this summer with a buddy. That said, SO MUCH of that timing will be me on the clutch at 6MT.. one bad shift and I will end up with a result that looks bad.

Yes, I pushed 17.8lbs PSI on one of my most recently logged road tests, with the latest build.
__________________
Check out my BMW DIY Channel on YouTube! F32, F80, E39, E46, E53, and E83 projects from Active Autowerke, TuningTechFS, Kies Motorsports, AvinUSA, Karbonius Composites and more!
** YouTube BMW DIY Guy ** ** Facebook BMW DIY Guy **
'Furiosa' F32 Build Thread
Appreciate 0
      04-12-2018, 06:55 PM   #234
ceedawg
Major
ceedawg's Avatar
436
Rep
1,350
Posts

Drives: 2k15 335i xdrive MSport 6spd
Join Date: Dec 2017
Location: Big City

iTrader: (0)

Quote:
Originally Posted by BMW DIY Guy View Post
Great question on the 0-60.. I am going to try to make some of the track days this summer with a buddy. That said, SO MUCH of that timing will be me on the clutch at 6MT.. one bad shift and I will end up with a result that looks bad.

Yes, I pushed 17.8lbs PSI on one of my most recently logged road tests, with the latest build.
Do you have a draggy Stephan to test your 0 to 60?
And the run where you logged 17.8 psi ,does it show the rev range and psi at the same time or is it a short burst of 17.8 psi and then tapers down rapidly?
__________________
2k15 335i Msport xdrive 6spd
Wagner Comp2 FMIC,FTP CP,stock exhaust. Fabspeed Sport catted DP, ACS springs. FBO BM3 Stg 2

Last edited by ceedawg; 04-12-2018 at 07:05 PM..
Appreciate 0
      04-12-2018, 08:07 PM   #235
matty088
Major
265
Rep
1,066
Posts

Drives: 335i
Join Date: Jan 2012
Location: Ct

iTrader: (1)

Quote:
Originally Posted by BMW DIY Guy View Post
Great question on the 0-60.. I am going to try to make some of the track days this summer with a buddy. That said, SO MUCH of that timing will be me on the clutch at 6MT.. one bad shift and I will end up with a result that looks bad.

Yes, I pushed 17.8lbs PSI on one of my most recently logged road tests, with the latest build.
What gear and what rpm?

Lots of people are getting boost spikes on tip in on tunes
Appreciate 0
      04-12-2018, 11:42 PM   #236
BMW DIY Guy
Lieutenant Colonel
875
Rep
1,614
Posts

Drives: 2014 435i
Join Date: Jan 2017
Location: Maple Valley WA

iTrader: (1)

Garage List
2014 BMW 435i  [0.00]
Shoot me a PM with your email and I will send ya'll the logs from that run. 4th gear, don't remember the RPM atm, and had to back off quickly due to conditions.
__________________
Check out my BMW DIY Channel on YouTube! F32, F80, E39, E46, E53, and E83 projects from Active Autowerke, TuningTechFS, Kies Motorsports, AvinUSA, Karbonius Composites and more!
** YouTube BMW DIY Guy ** ** Facebook BMW DIY Guy **
'Furiosa' F32 Build Thread
Appreciate 0
      04-13-2018, 08:36 AM   #237
jh_f30
Lieutenant Colonel
jh_f30's Avatar
1084
Rep
1,569
Posts

Drives: 2013 335i Sportline Auto RWD
Join Date: Aug 2017
Location: Bay Area, CA

iTrader: (2)

Did a quick pull after work yesterday to try to get some logs out to Nic on my current map (stage 2, E30). Using the performance meter in OBD Fusion (don't have a Dragy, and I'm on iOS so no Torque Pro), I pulled 0-60 in 4.66.

Probably would've been a couple tenths quicker, but I didn't get a great hook up and had a decent amount of wheel spin through the first couple gears (despite using LC).

Last fill up was 4.6 gals of E85 and the rest 91AKI and I had just over half a tank and probably about 75 lbs of random tools and junk in my car.

And for whatever this is worth (which may not be much), on a separate wot pull, it logged peak calculated engine hp/tq at 387/503. Obviously not figures at the wheels, and who knows how these "calculated PIDs" are actually calculated. So I take it with a grain of salt, but it's something.

Still trying to find time to get on a dyno and to hit up Wednesday Night Drags at Sonoma Raceway for actual ETs, but for now, this is what I've got. I'll be sending logs over to Nic to see if there's any tweaking needed.
__________________
2013 F30 335i RWD ZF Melbourne Red
~Remus Sport Axleback~VRSF Chargepipe~VRSF Catless Downpipe~HR Sport Springs~CF Rear Lip Spoiler~Active Autowerke OBD Flash Tune Stage 2~
Appreciate 0
      04-13-2018, 09:13 AM   #238
ceedawg
Major
ceedawg's Avatar
436
Rep
1,350
Posts

Drives: 2k15 335i xdrive MSport 6spd
Join Date: Dec 2017
Location: Big City

iTrader: (0)

Quote:
Originally Posted by jh_f30 View Post
Did a quick pull after work yesterday to try to get some logs out to Nic on my current map (stage 2, E30). Using the performance meter in OBD Fusion (don't have a Dragy, and I'm on iOS so no Torque Pro), I pulled 0-60 in 4.66.

Probably would've been a couple tenths quicker, but I didn't get a great hook up and had a decent amount of wheel spin through the first couple gears (despite using LC).

Last fill up was 4.6 gals of E85 and the rest 91AKI and I had just over half a tank and probably about 75 lbs of random tools and junk in my car.

And for whatever this is worth (which may not be much), on a separate wot pull, it logged peak calculated engine hp/tq at 387/503. Obviously not figures at the wheels, and who knows how these "calculated PIDs" are actually calculated. So I take it with a grain of salt, but it's something.

Still trying to find time to get on a dyno and to hit up Wednesday Night Drags at Sonoma Raceway for actual ETs, but for now, this is what I've got. I'll be sending logs over to Nic to see if there's any tweaking needed.
Still good 0 to 60 times. If it were an x drive I can say low 4s for sure!
__________________
2k15 335i Msport xdrive 6spd
Wagner Comp2 FMIC,FTP CP,stock exhaust. Fabspeed Sport catted DP, ACS springs. FBO BM3 Stg 2
Appreciate 0
      04-13-2018, 02:54 PM   #239
Andrew@ActiveAutowerke
BimmerPost Supporting Vendor
Andrew@ActiveAutowerke's Avatar
1059
Rep
5,284
Posts


Drives: 17 F80 M3 YASSS
Join Date: Dec 2011
Location: Miami Fl

iTrader: (5)

Quote:
Originally Posted by jh_f30 View Post
Did a quick pull after work yesterday to try to get some logs out to Nic on my current map (stage 2, E30). Using the performance meter in OBD Fusion (don't have a Dragy, and I'm on iOS so no Torque Pro), I pulled 0-60 in 4.66.

Probably would've been a couple tenths quicker, but I didn't get a great hook up and had a decent amount of wheel spin through the first couple gears (despite using LC).

Last fill up was 4.6 gals of E85 and the rest 91AKI and I had just over half a tank and probably about 75 lbs of random tools and junk in my car.

And for whatever this is worth (which may not be much), on a separate wot pull, it logged peak calculated engine hp/tq at 387/503. Obviously not figures at the wheels, and who knows how these "calculated PIDs" are actually calculated. So I take it with a grain of salt, but it's something.

Still trying to find time to get on a dyno and to hit up Wednesday Night Drags at Sonoma Raceway for actual ETs, but for now, this is what I've got. I'll be sending logs over to Nic to see if there's any tweaking needed.

Very good numbers. 0-60 is all about traction.
Appreciate 1
      04-13-2018, 05:55 PM   #240
BMW DIY Guy
Lieutenant Colonel
875
Rep
1,614
Posts

Drives: 2014 435i
Join Date: Jan 2017
Location: Maple Valley WA

iTrader: (1)

Garage List
2014 BMW 435i  [0.00]
Got a new build from Nic today! Wooohooo... still cant provide all of the logging values he would like (yet), but working on it!
__________________
Check out my BMW DIY Channel on YouTube! F32, F80, E39, E46, E53, and E83 projects from Active Autowerke, TuningTechFS, Kies Motorsports, AvinUSA, Karbonius Composites and more!
** YouTube BMW DIY Guy ** ** Facebook BMW DIY Guy **
'Furiosa' F32 Build Thread
Appreciate 1
ceedawg435.50

      04-13-2018, 09:03 PM   #241
BMW DIY Guy
Lieutenant Colonel
875
Rep
1,614
Posts

Drives: 2014 435i
Join Date: Jan 2017
Location: Maple Valley WA

iTrader: (1)

Garage List
2014 BMW 435i  [0.00]
I was able to get 4 logged runs this evening, including a long 4th run before I ran out of time and road. Incredibly responsive, DSC light in 2nd and 3rd, and even tail end wiggle in 4th gear.

Just amazing.. new turbo PSI record of 18.7lbs peak! My cat temp peak was 1601, so not climbing any higher which is good.
__________________
Check out my BMW DIY Channel on YouTube! F32, F80, E39, E46, E53, and E83 projects from Active Autowerke, TuningTechFS, Kies Motorsports, AvinUSA, Karbonius Composites and more!
** YouTube BMW DIY Guy ** ** Facebook BMW DIY Guy **
'Furiosa' F32 Build Thread
Appreciate 2
jh_f301084.00
ceedawg435.50

      04-14-2018, 12:50 AM   #242
ceedawg
Major
ceedawg's Avatar
436
Rep
1,350
Posts

Drives: 2k15 335i xdrive MSport 6spd
Join Date: Dec 2017
Location: Big City

iTrader: (0)

Quote:
Originally Posted by BMW DIY Guy View Post
I was able to get 4 logged runs this evening, including a long 4th run before I ran out of time and road. Incredibly responsive, DSC light in 2nd and 3rd, and even tail end wiggle in 4th gear.

Just amazing.. new turbo PSI record of 18.7lbs peak! My cat temp peak was 1601, so not climbing any higher which is good.
18.7 wow! Can that be achieved with the stock map sensor and DV? NICE!!!
__________________
2k15 335i Msport xdrive 6spd
Wagner Comp2 FMIC,FTP CP,stock exhaust. Fabspeed Sport catted DP, ACS springs. FBO BM3 Stg 2

Last edited by ceedawg; 04-14-2018 at 05:38 AM..
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 07:30 PM.




f30post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST