[mannymazz]

Originally Posted by AvetNY

Just received my JB+ !!! The post office mess up on a scanning of the package !

Here is more pictures of installation:

Coupe 430i xdrive (B48) automatic transmission

Basically you don't need even to touch the plastic covers.


but here is closer look without covers




So I did a 30 min driving on sport mode (93 octane Shell V-Power). Do I like it ? I f***g love it
Totally another pull ! (with default 3.5psi !!!). The torque is much more "longer" and not in mid range but from the "begging to the end" you feel that strong pull very well !!!!
Now I walking around the car with a screw driver like a maniac to convince myself try max 4.5


JB+ is the best $199 I spend it on my car.

That's an easy install did you disconnect the battery?

[f30m]

When is this supposed to be available to everyone?

[340MSport]

Originally Posted by f30m

When is this supposed to be available to everyone?

You should be able to order now!

https://www.n54tuning.com/b48/b58-jb...all-tuner.html

[340MSport]

With a newborn baby, any type of "project" is pretty much impossible. This JB+ was exactly what I was looking for as free time is pretty much non existent. This was so quick and easy to install, I was able to get this done while "taking tha garbage out". .

With pictures and all, this took about 15mins. Note this is also my 1st time really getting a good look under the hood. Again, newborn baby...

Unfortunately 15mins was all I had tonight, so I didn't get to go for a drive. Will go for a diaper run tomorrow and let you all know about the performance. Attached some pics in the meantime. Hope this helps.

With the 2016 B58, I had to take the cover off (just pops right up) and the TMAP sensor is the left (wider) sensor in the pic. Hope this helps.

[Mike@N54Tuning.com]

Thanks for the pics..

Mike

[GoodGuyAvi]

Originally Posted by mannymazz

That's an easy install did you disconnect the battery?

No.
Open hood lock the car. Wait 10 min. Move the key far from the car (to avoid waking her up). Plug it...

[Mike@N54Tuning.com]

Originally Posted by AvetNY

No.
Open hood lock the car. Wait 10 min. Move the key far from the car (to avoid waking her up). Plug it...

The above should work well to put car to sleep, but if ever in doubt just unplug battery.

Mike

[GoodGuyAvi]

Originally Posted by Mike@N54Tuning.com

The above should work well to put car to sleep, but if ever in doubt just unplug battery.

Mike

Yes unplugged battery is much more professional.

[mannymazz]

When adjusting boost does the tune need to be removed or I can simple adjust it while on the car?

[Thisisdudewhoru]

Originally Posted by mannymazz

When adjusting boost does the tune need to be removed or I can simple adjust it while on the car?

I did mine on car but I'd recommend taking it off to not drop in any screws or pieces in the engine bay. Ask me how I know

[GoodGuyAvi]

Originally Posted by mannymazz

When adjusting boost does the tune need to be removed or I can simple adjust it while on the car?

Adjust on a car. Just make sure u didn't drop some screws lmao

[Mike@N54Tuning.com]

Originally Posted by mannymazz

When adjusting boost does the tune need to be removed or I can simple adjust it while on the car?

You can do either, but it might be easier with it removed.

Mike

[2016340iMSport]

Received my unit today, very nice power addition for $200

[340MSport]

Originally Posted by 2016340iMSport

Received my unit today, very nice power addition for $200

Once you hit that 3k rpm range, it's awesome. I feel like there's a lot more power in the day to day range. Well worth the money and time for this product.

[Mike@N54Tuning.com]

Originally Posted by 2016340iMSport

Received my unit today, very nice power addition for $200

There is no better HP / $ product out there..

Glad you're enjoying it!

Mike

[Gugo07]

I'm interested in ordering the JB+.

I'm assuming the unit's firmware will always be upgradeable as updates are released - will the hardware change at all when it comes out of beta?

[Mike@N54Tuning.com]

Originally Posted by Gugo07

I'm interested in ordering the JB+.

I'm assuming the unit's firmware will always be upgradeable as updates are released - will the hardware change at all when it comes out of beta?

There are no plans for firmware updates, and there is no end user way to flash new firmware onto the chip. There is no USB/BT hookup on the JB+ the way there is on the JB4 systems. This is a super simple PNP unit.

Mike

[kentgbr]

Originally Posted by Mike@N54Tuning.com

There are no plans for firmware updates, and there is no end user way to flash new firmware onto the chip. There is no USB/BT hookup on the JB+ the way there is on the JB4 systems. This is a super simple PNP unit.

Mike

Mike, are these units shipping yet?

[Thisisdudewhoru]

Originally Posted by kentgbr

Mike, are these units shipping yet?

They are from -BMS website. I would assume he has them too.

I'm getting ready to upgrade to jb4 cause I'm looking to run meth soon. I'll probably sell mine

[Mike@N54Tuning.com]

Originally Posted by kentgbr

Mike, are these units shipping yet?

Yup.. Shipped a hole bunch out this week and last week

Mike

[riskmaker76]

Has this been tested with mppsk?

[mannymazz]

Originally Posted by riskmaker76

Has this been tested with mppsk?

Need to find out too, doesn't seem like it yet and I really don't want to be the first lol