08-04-2019, 09:37 AM | #1 |
New Member
1
Rep 10
Posts |
Delete Cruise Control
Hi,
I've got a 330d with cruise control, however it's just started playing up lately I tend to get a random cruise control failure which is very intermittent. I just wanted to ask if there was a way to code out the cruise control. I have the E-Net Cable and all the relevant software etc From what I've managed to read is that I should be able to just delete 544 from the coding which should trick the car into thinking it doesn't have cruise control and stop the random ping and cruise control failure warnings. Any help would be appreciated |
08-04-2019, 09:41 AM | #2 | |
First Lieutenant
112
Rep 332
Posts |
Quote:
|
|
Appreciate
0
|
08-04-2019, 09:57 AM | #3 | |
New Member
1
Rep 10
Posts |
Quote:
Dynamic stability control - Diagnose Fault D35A53 ICM/EPS interface (measured steering angle, front axle, 57.1.2): invalid signal Dynamic stability control - Diagnose Fault D35A62 Interface ICM/EPS (cross-acceleration gravity point 0x19A) invalid signal Just seems quicker and easier to delete cruise control functionality for now and when I manage to get a new shape steering wheel i'll install later down the line. |
|
Appreciate
0
|
08-04-2019, 09:59 AM | #4 | ||
First Lieutenant
112
Rep 332
Posts |
Quote:
I think the steering angle sensor needs resetting. It can be done through ISTA. It is in the steering écu (can't remember the name now), read the écu data and you will find it. what does ISTA suggest to do to fix this? |
||
Appreciate
0
|
08-04-2019, 10:06 AM | #5 | |
New Member
1
Rep 10
Posts |
Quote:
Could i use the E-Net cable for it? |
|
Appreciate
0
|
08-04-2019, 10:09 AM | #6 | ||
First Lieutenant
112
Rep 332
Posts |
Quote:
https://www.bimmergeeks.net/downloads After you instal it go to the settings of ista and change the communication to enet. Worked like a charm for me. I thought you had all the bmw software. Ista is also called Rheingold. |
||
Appreciate
0
|
08-04-2019, 10:14 AM | #7 | |
New Member
1
Rep 10
Posts |
Quote:
|
|
Appreciate
0
|
08-04-2019, 10:20 AM | #8 | ||
First Lieutenant
112
Rep 332
Posts |
Quote:
|
||
Appreciate
0
|
08-04-2019, 01:31 PM | #9 |
New BMW owner
139
Rep 621
Posts
Drives: BMW 316d, BMW F40 116d
Join Date: Jan 2012
Location: Belgium
|
Usually it’s the multifunctional steering wheel buttons that’s what causing the trouble.
|
Appreciate
0
|
08-04-2019, 08:01 PM | #10 |
New Member
1
Rep 10
Posts |
|
Appreciate
0
|
08-05-2019, 03:18 AM | #11 | |
First Lieutenant
112
Rep 332
Posts |
Quote:
Does anyone know how he can disable the cruise control? |
|
Appreciate
0
|
08-05-2019, 06:42 AM | #13 |
First Lieutenant
112
Rep 332
Posts |
|
Appreciate
0
|
08-05-2019, 12:04 PM | #14 | |
New Member
1
Rep 10
Posts |
Quote:
Quick update I tried ISTA and it suggested the faults were with the steering wheel so resetting the angle sensor wouldn't really have worked. I may try to delete the cruise control as option a but really need to get to grips with ESYS |
|
Appreciate
0
|
08-05-2019, 12:22 PM | #15 | ||
First Lieutenant
112
Rep 332
Posts |
Quote:
|
||
Appreciate
0
|
08-05-2019, 12:38 PM | #16 |
New Member
1
Rep 10
Posts |
|
Appreciate
0
|
08-05-2019, 02:01 PM | #18 | |
New Member
1
Rep 10
Posts |
Quote:
I've deleted the VO 544 from the list and thought i'd just have to refresh the a. FEM b. ICM c. KOMBI But doesn't seem to work or I don't know what values to change Last edited by tariq_moh; 08-05-2019 at 02:23 PM.. |
|
Appreciate
0
|
08-05-2019, 02:47 PM | #19 | |
Colonel
588
Rep 2,302
Posts |
Quote:
Then load the edited VO, activate the VO and Mark the ecus FEM, ICM and Kombi and Hit the button „Code“. |
|
Appreciate
1
tariq_moh1.00 |
08-05-2019, 03:17 PM | #20 |
New Member
1
Rep 10
Posts |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|