OFFICIAL Slammed/Stanced (F30/F32) Thread

KendrickOak · 06-09-2018, 03:12 AM

Quote:

Originally Posted by Kevin_Trxn

Quote:

Originally Posted by KendrickOak

Quote:

Originally Posted by Kevin_Trxn

Im going bags, but I have a question.

Is the natural camber a good amount?

Should you measure for wheel fitment when slammed or at ride height?

Just wondering if measured when slammed then ride height will have a bunch of poke or if measure at ride height then slammed will have too much tuck

I would definitely measure aired out. It tends to work itself out once you air up to ride height. My fitment is tight and perfect at ride height. This is assuming you're going for the poke look

You have any pics at ride height?
Tyty

I'll take one later on today, it looks just as good

KendrickOak · 06-09-2018, 03:13 AM

Current stance aired down, new wheels and side skirt extension on the way!

_.loso._ · 06-12-2018, 08:36 PM

GMR GS-5 Brush clear centers with polished lips

F: 18x9.5 +21 225/40/18

R: 18x10.5 +21 235/40/18

Bc coilovers

Megan Racing rear camber kit (still needs to be adjusted)

Only rubs on huge dips on highway, other than that no rubbing at all.

KendrickOak · 06-15-2018, 11:39 PM

Bagged on super deep concave 20" forgestar f14s all around.

Thank you for all that contributed in helping me with my anxiety and those who said it wasn't possible lol

Car is very dirty by the way.

20x9.5 +18. 20x10.5 +22.
Camber: -1.7 front, -2.9 rear
Fenders: rolled flat
Tires: 225/30/20 front. 245/35/20 rear.

KendrickOak · 06-16-2018, 08:53 PM

Washed.

harvs43 · 06-17-2018, 12:51 PM

No slammed but lowered on ACS springs......

Wheels are 20 inch Ispiri FFR8s, fronts are 235/35/20 Et35 on a 9.5 inch and rears are 275/30/20 Et45 on a 10 inch.

N0Chill 335i · 06-17-2018, 03:55 PM

Quote:

Originally Posted by KendrickOak

Washed.

Do you have 4 piston rear calipers?

kern417 · 06-18-2018, 06:44 AM

New wheels made it to chicago, then memphis....then somehow got held up in customs

not sure how that happens after they're already in the US, but hopefully this is one of my last pics on the 400Ms.

kern417 · 06-18-2018, 06:44 AM

Quote:

Originally Posted by _.loso._

GMR GS-5 Brush clear centers with polished lips

F: 18x9.5 +21 225/40/18

R: 18x10.5 +21 235/40/18

Bc coilovers

Megan Racing rear camber kit (still needs to be adjusted)

Only rubs on huge dips on highway, other than that no rubbing at all.

Maybe it's just the angle but that looks like it needs A LOT of work.

vgore · 06-18-2018, 07:29 AM

Quote:

Originally Posted by mark_tdot

20x8.5 front 35+ and 20x10 rear 40+ lowered on Eibach pro-kit (RWD version)

Your car looks crazy good. The wheels looks so good on your car. Great color combo. can you pm me details on the rims please?

wdeerfield · 06-18-2018, 11:05 AM

Quote:

Originally Posted by kern417

Maybe it's just the angle but that looks like it needs A LOT of work.

not to mention the stretch on that rear wheel to make it "fit"

definitely not for me but he's trying to stance it so it appears.

KendrickOak · 06-19-2018, 07:40 AM

Quote:

Originally Posted by N0Chill 335i

Quote:

Originally Posted by KendrickOak

Washed.

Do you have 4 piston rear calipers?

They're custom made caliper covers

I'll be getting a big brake kit soon though

bispaq · 06-20-2018, 03:18 AM

Quote:

Originally Posted by KendrickOak

Washed.

Well Done Sir....

kern417 · 06-20-2018, 07:00 AM

I bought these used from a YahooJapan Auction because I got tired of waiting for decent sizing to pop up on the classifieds. Pretty happy with what I received. The finish looks insane up close.

Hopefully I'll get these mounted and fitted soon. I'm little worried about fitting the 245 tire up front but we'll see.

Volk ZE40
18x8.5 et30
18x9.5 et40

Continental Extremecontact Sport
245/40/18
275/35/18

N0Chill 335i · 06-20-2018, 12:13 PM

Quote:

Originally Posted by KendrickOak

They're custom made caliper covers

I'll be getting a big brake kit soon though

I'm selling my M Sport rears and full rotors if you're interested.

RH06 · 06-20-2018, 06:40 PM

Hi Everyone,

I recently got a 2014 335i xDrive M sport. I'm looking to do some cheap mods. I'm currently on 18" OEM RFT wheels.

I wanted to do install spacers and springs.... Looking to buy new 19" wheels next year.

Can anyone recommend the spacer sizes and springs which will work without any rubbing issue and still give a smooth ride.

Will do red calipers and ceramic coating soon.

Car is Apline White on Red interior

Thanks
Robin

F30_SixSpeed · 06-21-2018, 10:28 PM

Haven't posted here in a while.

Johnny250 · 06-22-2018, 01:29 PM

Quote:

Originally Posted by kern417

I bought these used from a YahooJapan Auction because I got tired of waiting for decent sizing to pop up on the classifieds. Pretty happy with what I received. The finish looks insane up close.

Hopefully I'll get these mounted and fitted soon. I'm little worried about fitting the 245 tire up front but we'll see.

Volk ZE40
18x8.5 et30
18x9.5 et40

Continental Extremecontact Sport
245/40/18
275/35/18

You're gonna be fine, how did you do shipping from japan by the way?

N0Chill 335i · 06-22-2018, 02:30 PM

Quote:

Originally Posted by F30_SixSpeed

Haven't posted here in a while.

It's LIT!

kern417 · 06-23-2018, 08:23 AM

Quote:

Originally Posted by Johnny250

You're gonna be fine, how did you do shipping from japan by the way?

Went through ZenMarket. $35 to ship local in japan, $10 to repackage with additional reinforcement, then $400 to ship to the US. Pretty easy process overall.

ipypk · 06-24-2018, 01:52 AM

im planning to get enkei rpf1 on f30
front 19x8.5 et35 with 235/35
rear 19x10 et25 with 255/35
will it fit or the rear will stick out to much?

N0Chill 335i · 06-24-2018, 08:10 AM

Quote:

Originally Posted by ipypk

im planning to get enkei rpf1 on f30
front 19x8.5 et35 with 235/35
rear 19x10 et25 with 255/35
will it fit or the rear will stick out to much?

The rears will be a challenge at that width and offset. You'll need like -3 degrees or more to make that work. The fronts will be fine for the most part.

06-09-2018, 03:13 AM	#992
KendrickOak KendrickOak 359 Rep 201 Posts Drives: 17' F32 M Sport Join Date: Nov 2017 Location: Texas iTrader: (0)	Current stance aired down, new wheels and side skirt extension on the way! Attached Images
	Appreciate 2 daryl rsv452.50 PF49er0.00 Quote

06-12-2018, 08:36 PM	#993
_.loso._ New Member 0 Rep 21 Posts Drives: 2014 BMW F30 320i Join Date: Feb 2018 Location: California iTrader: (0)	GMR GS-5 Brush clear centers with polished lips F: 18x9.5 +21 225/40/18 R: 18x10.5 +21 235/40/18 Bc coilovers Megan Racing rear camber kit (still needs to be adjusted) Only rubs on huge dips on highway, other than that no rubbing at all. Attached Images
	Appreciate 0 Quote

06-15-2018, 11:39 PM	#994
KendrickOak KendrickOak 359 Rep 201 Posts Drives: 17' F32 M Sport Join Date: Nov 2017 Location: Texas iTrader: (0)	Bagged on super deep concave 20" forgestar f14s all around. Thank you for all that contributed in helping me with my anxiety and those who said it wasn't possible lol Car is very dirty by the way. 20x9.5 +18. 20x10.5 +22. Camber: -1.7 front, -2.9 rear Fenders: rolled flat Tires: 225/30/20 front. 245/35/20 rear. Attached Images
	Appreciate 5 BennyJones23.50 Kevin_Trxn603.50 kern4174445.00 F30_SixSpeed1170.50 bispaq33.50 Quote

06-16-2018, 08:53 PM	#995
KendrickOak KendrickOak 359 Rep 201 Posts Drives: 17' F32 M Sport Join Date: Nov 2017 Location: Texas iTrader: (0)	Washed. Attached Images
	Appreciate 6 kern4174445.00 bispaq33.50 foey79.50 DaFish155.50 daryl rsv452.50 jaximointhecut73.50 Quote

06-17-2018, 12:51 PM	#996
harvs43 Second Lieutenant 113 Rep 231 Posts Drives: F31 335d X Drive Join Date: Jan 2018 Location: Wiltshire iTrader: (0)	No slammed but lowered on ACS springs...... Wheels are 20 inch Ispiri FFR8s, fronts are 235/35/20 Et35 on a 9.5 inch and rears are 275/30/20 Et45 on a 10 inch. Attached Images
	Appreciate 0 Quote

06-20-2018, 06:40 PM	#1006
RH06 New Member 0 Rep 7 Posts Drives: 2014 BMW 335i M Sport Join Date: Jun 2018 Location: Toronto, Canada iTrader: (0) Garage List 2014 335i [0.00]	Hi Everyone, I recently got a 2014 335i xDrive M sport. I'm looking to do some cheap mods. I'm currently on 18" OEM RFT wheels. I wanted to do install spacers and springs.... Looking to buy new 19" wheels next year. Can anyone recommend the spacer sizes and springs which will work without any rubbing issue and still give a smooth ride. Will do red calipers and ceramic coating soon. Car is Apline White on Red interior Thanks Robin
	Appreciate 0 Quote

06-21-2018, 10:28 PM	#1007
F30_SixSpeed Captain 1171 Rep 969 Posts Drives: 335i M Sport Join Date: Mar 2016 Location: New Jersey iTrader: (1)	Haven't posted here in a while. __________________ 335i M Sport 6MT \|\| PS2 Turbo, FBO, XDI-35 HPFP, BM3, KW, MP BBK, OEM+ INSTAGRAM \|\| BUILD THREAD
	Appreciate 7 BennyJones23.50 SoCal_NSX2398.00 kern4174445.00 cdwalls701.00 wdeerfield2745.00 j2nicee55.00 Quote

06-24-2018, 01:52 AM	#1011
ipypk Registered 0 Rep 1 Posts Drives: F30 Join Date: Jun 2018 Location: Indonesia iTrader: (0)	im planning to get enkei rpf1 on f30 front 19x8.5 et35 with 235/35 rear 19x10 et25 with 255/35 will it fit or the rear will stick out to much?
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search