02-25-2016, 01:11 PM | #1 |
New Member
7
Rep 28
Posts
Drives: 428iX M- SPORT
Join Date: Feb 2016
Location: Detroit
|
F32 not connecting to e sys
Im using an OBD 2 connected to a usb ethernet adapter and this is happening..... I tried many times "Connection via VIN" remains grayed out, close E-Sys and shut car completely off for 30 minutes, and try connection again beginning with Step
19. |
02-26-2016, 09:59 AM | #2 |
2JZ-GTE
3032
Rep 3,992
Posts |
Do u wait for yellow marker in nic? Is cable good ? Did you reboot everything ?
|
Appreciate
0
|
02-26-2016, 10:00 AM | #3 |
New Member
7
Rep 28
Posts
Drives: 428iX M- SPORT
Join Date: Feb 2016
Location: Detroit
|
The yellow does not come up. Whats nic
|
Appreciate
0
|
02-27-2016, 08:58 AM | #4 |
Lieutenant
122
Rep 436
Posts
Drives: 2016 435i xDrive Gran Coupé
Join Date: Apr 2015
Location: Canada
|
Your cable may be bad or check here: http://www.bimmerfest.com/forums/sho...d.php?t=871594
Rsnic posted the attachment below which may also be of some help. Also, I assume you are selecting F20. |
Appreciate
0
|
02-27-2016, 09:12 AM | #5 |
New Member
7
Rep 28
Posts
Drives: 428iX M- SPORT
Join Date: Feb 2016
Location: Detroit
|
I use f032 in e sys launcher then select f020 when trying to connect
|
Appreciate
0
|
02-27-2016, 10:09 AM | #6 |
Lieutenant
122
Rep 436
Posts
Drives: 2016 435i xDrive Gran Coupé
Join Date: Apr 2015
Location: Canada
|
Righto...then I would check as noted above. When I load E-sys on my computer with no cable connection, I get the response you describe: Connection via VIN is greyed out and "No ZGW available". That suggests a cable problem or a problem with the LAN connection.
|
Appreciate
0
|
02-27-2016, 10:11 AM | #7 |
New Member
7
Rep 28
Posts
Drives: 428iX M- SPORT
Join Date: Feb 2016
Location: Detroit
|
Im going to try on my mac. Can anyone send the installation for e sys and set ups for mac?
|
Appreciate
0
|
02-27-2016, 10:32 AM | #8 |
Lieutenant
122
Rep 436
Posts
Drives: 2016 435i xDrive Gran Coupé
Join Date: Apr 2015
Location: Canada
|
Attached and check here: http://www.bimmerfest.com/forums/sho...d.php?t=842976
|
Appreciate
0
|
02-29-2016, 12:48 PM | #9 |
Yr1OfD1
107
Rep 900
Posts |
first you have to check you laptop, it might be you LAN is disabled or make sure your OBD2 port is not loose. push all the way
then re-enable your e-sys program
__________________
2015 328i Gran Turismo M Sport
2013 328i XDrive Sedan M Sport 2011 X5 xDrive50i 2009 X5 xDrive 30i 2008 135i Coupe |
Appreciate
0
|
03-03-2016, 06:52 AM | #10 |
New Member
7
Rep 28
Posts
Drives: 428iX M- SPORT
Join Date: Feb 2016
Location: Detroit
|
I tried another computer without using the ethernet adapter and it worked great! thanks for everyones help!
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|