10-18-2019, 02:19 AM | #1 |
E36fiend
285
Rep 637
Posts
Drives: 2014 435i xDrive
Join Date: May 2019
Location: Sammamish, WA
|
TAL lines set to status NotExecutable during TAL calculation?
I wanted to flash my FEM_BODY module and encountered this error while doing the TAL calculation.
When I went to actually flash the FEM_BODY the flash did not finish but I don't know how to interpret the log. I'm guessing it was because I did not select the dependencies? My intention is to update the i-step level to F020-16-11-503 but I'm concerned about what this error/warning message is during TAL calculation. |
10-18-2019, 03:01 PM | #2 |
E36fiend
285
Rep 637
Posts
Drives: 2014 435i xDrive
Join Date: May 2019
Location: Sammamish, WA
|
Any coding experts know what the deal is with this error? I can attach the TAL file or anything else that might be useful. In the file there are 6 entries that are "NotExecutable" but I don't know why.
|
Appreciate
0
|
10-18-2019, 08:19 PM | #3 |
Private First Class
27
Rep 102
Posts |
|
Appreciate
0
|
10-19-2019, 08:45 PM | #4 |
E36fiend
285
Rep 637
Posts
Drives: 2014 435i xDrive
Join Date: May 2019
Location: Sammamish, WA
|
I don't think so, the HWEL numbers in the _ist and _soll appear to be the same. I've attached the relevant files if you want to look.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|