[mbanks21]

Originally Posted by jcordier

Is this one magnetic? I might get my gf it considering it's very simple if it is so.

Yes, you put a little magnetic plate on your phone/phone case

[roxxor]

I'd been looking for a solution for a while as well, just ordered the Koomus mount, seemed to have pretty good reviews so I will give it a shot.

[badbread]

Check out Kuda's mounts, they integrate like OEM.

[IMG]http://i2.wp.com/*************/wp-content/uploads/2016/08/IMAG0094.jpg?resize=225%2C300[/IMG]

You can see it my pic above next to the wingstop cup.

I used a cheap magnetic stick on mount in conjunction with the KUDA mount. Works awesome!

They are expensive but well worth the OEM look IMO.
http://www.kudausa.com/bmw-3-f30-sin...ack-a1702.html

[roxxor]

For those who have the Koomus cd slot mount, how do you get it to stay in place? I've tried positioning it on either side and dead in the center, and even with it pushed all the way in, whenever I go to take the phone off of it, the whole mount comes out of the cd slot.

[mbanks21]

Originally Posted by roxxor

For those who have the Koomus cd slot mount, how do you get it to stay in place? I've tried positioning it on either side and dead in the center, and even with it pushed all the way in, whenever I go to take the phone off of it, the whole mount comes out of the cd slot.

Are you pulling the phone straight off the mount? I kind of pull it to the side but I've never had an issue with the mount coming out of the cd slot.

[tsbrown]

Originally Posted by jcordier

What phone mounts does everybody use for their 3 series? I've bought a couple, and either they break, or don't stay in place.

I use a Kenu Airframe (without the vent clip) attached to a Panavise bracket in my E90 M3. Works very well and I like it because it's low profile so I want to do something similar in my F30 when it arrives in 2 weeks. I might give the WizGear magnetic mount a try in a similar setup if a bracket is available because I don't like blocking the vents.

[dfeng]

+1 for Proclip. Has held solidly in place ever since I got it a month or two ago. I used to have a koomus and it was good at first until it slowly slid out and made my CD slot loose

[aps]

Scosche magic mount in the middle of my the iDrive controller panel. I'll take pics tomorrow morning. Perfect location for me.

[wilbur_the_goose]

Originally Posted by Erkan_340i

Below is what I'm using and highly recommend it.

https://www.amazon.com/gp/product/B0...0?ie=UTF8&th=1

I loved mine so much I took it to the UK with me for a week-long work trip. Left it in the rental car. I ordered another the morning after I got home.

I love this thing!

[RedKloud]

Originally Posted by roundel335

I keep mine in my jeans pocket. Works great!

+1

[Rhyzen]

Just ordered the Kenu Airframe+ Leather Edition | Car Mount for Smartphones and Phablets | Black. I'll post pics when it arrives.

https://www.amazon.com/gp/aw/d/B0149...qiL&ref=plSrch

[murrays]

Originally Posted by Hack14

ProClip is definitely a great choice. However, in the past few years I've been using Ram Mounts in all my vehicles.

Right now I'm using a Ram Mount cupholder mount with a small arm and Xgrip cradle, but they have a plethora of mounting options available for every vehicle. All of which are customizable for different locations and with differents sized arms, balls and cradles.

You should definitely give them a shot, they're incredible.

http://www.rammount.com

FYI, there's an additional 12v plug under the glove box that you could use to plug in:

[evdok]

This is my mount i use.

[applehusky]

Might look into some of these. last suction cup mount melted to the windshield x.x

[Ecks]

How does that proclip A pillar mount work if the airbag were to go off?

[etinifni]

Originally Posted by Ecks

How does that proclip A pillar mount work if the airbag were to go off?

I read your post and immediately thought to myself "probably just like takata" lol.

[Paul]

I've been using Flexpods on my MINIs for years, too bad something like it isn't available/possible for the F30.

http://www.cravenspeed.com/flexpod/

[Jadar]

I use a Logitech vent magnet I love it.

https://www.amazon.com/Logitech-Trip.../dp/B00KNU98XC

[R32DBP]

I use the bimmian dash mount with a pro clip magnetic ball mount. It sits to the right of the radio and attaches behind the radio. Very easy to install and is clean with the magnetic mount.

[Arthurrs]

Originally Posted by Ecks

How does that proclip A pillar mount work if the airbag were to go off?

Unless BMW has significantly changed their safety system (highly doubtful mid production cycle), on the driver's side you only have the airbag in the steering wheel and the knee bag in front of the driver. The Proclip A Pillar mount sits behind both of these devices. I would hope that the airbag goes off before the A pillar gets displaced enough to be a problem with either airbag. I doubt the A pillar mount will have any influence on the airbag built into the side of the driver's seat.

BTW, I have the ProClip A pillar mount, and love it! It's not in the way of the center dash, and it's within the periphery vision to the immediate left of my steering wheel so that I can run Waze on my iPhone while driving. I also installed their "move clip" accessory, so that my wife and I and the kids can change different cars/different sized phones very easily. Three different phone sizes: iPhone 6S plus, iPhone 6, iPhone SE, with three different sized holders, going into two different car mounts! Very slick system!

[etinifni]

Wife got me the the ProClip dash mount with the iOauto Pro Magnetic Mount for Christmas.


[IMG]http://d.pr/i/nD2l+[/IMG]

I've been using the magnetic mount mentioned above but it likes to spin if my iPhone 7+ isn't set on magnetic plate just right.


[IMG]http://d.pr/i/Jp72+[/IMG]


This new setup seems like it will fix that issue.


[IMG]http://d.pr/i/SUpH+[/IMG]
[IMG]http://d.pr/i/ldwA+[/IMG]

[Rhyzen]

A couple of pictures of the Kenu Airframe+ Leather Edition | Car Mount in my F30. I highly recommend it. It can be rotated to be either in portrait or landscape mode.