[J306TD]

How do I find out with UPD version I'm using?

[ooshnoo]

Originally Posted by IAmATeaf

I didn’t lose any coding but it does reset the nav, media and telephone system so you lose any changes like equaliser settings which is a tad annoying as I had not written them down.

I didn't lose any of those settings. Nothing was reset for me.

[JDTX]

Originally Posted by J306TD

How do I find out with UPD version I'm using?

I don't think there's an easy way... If you download the latest update PDF for your VIN (from BMW.COM) the release notes will tell you the version of firmware that is included.

Check that against the version on your HU, and you will know if you have the latest version. However, I don't know that anyone has created a table that shows the UPD versions and what firmware is included (historically).

[J306TD]

This is what mine is currently

[IAmATeaf]

That’s what mine was on before I updated.

[XxThe_RemedyXx]

Originally Posted by IAmATeaf

That’s what mine was on before I updated.

Same here...

[IAmATeaf]

After the update mine ended up with

MN 003.003.001
TN 003.255.080
HN 003.255.080

[JDTX]

If you guys download the PDF file, it should echo the version(s) you ended up with...

[IAmATeaf]

What’s strange is that with the new updates site when I put in my full vin it shows nothing for me now?

[ThereGoesForNothing]

2014 here and got the update on site with full VIN. Update took 2 mins.

[Eschmacher]

The update appeared for me on the website, and now it doesn't. They changed the design too. Anyone got the update file they can host for me so I can download it?

Or maybe it already updated OTA?

[XxThe_RemedyXx]

Originally Posted by Eschmacher

The update appeared for me on the website, and now it doesn't. They changed the design too. Anyone got the update file they can host for me so I can download it?

Or maybe it already updated OTA?

https://mega.nz/#!LzhlDCIQ!MOBQshGdZ...nLznsLzOTmpStI

[N26Ghost]

Originally Posted by craeg

A few problems.
1) Cant read my text messages on idrive anymore
2) Issues with streaming over USB - will work then randomly stop working and wont reconnect even though its charging fine. Frequently displays "you can only use one device at a time" - or something similar on the phone
3) Wont connect over bluetooth to stream music randomly even though the phone is connected fine.

And unfortunately, all three issues persist even after the update. Its possible that the update was in anticipation of a new IOS release..

Let me ask a few questions...

When your phone is connected via USB...is your phone in your arm rest?

If not, is the cable coming out of the arm rest compartment through the lid?

If so, have you noticed that the tolerance of the arm rest lid and the bottom piece is very tight and pinches the cable?

If so, please note that this arm rest will destroy any USB cable over time and through the vibrations from driving. As this starts to happen, you'll notice that your charging will be temporarily interrupted and then resume. iDrive wants to stay connected to your device, so it will revert to Bluetooth when the USB connection is interrupted, if the connection is restored too many times, iDrive gives up and stops pairing via either method.

I spent a grip on cables until I put this together an ultimately used a Dremel to create a channel in the lip of the arm rest lower half to provide relief for the cable. Haven't had any of the above issues since. Used to have them all.

[Eschmacher]

Originally Posted by XxThe_RemedyXx

https://mega.nz/#!LzhlDCIQ!MOBQshGdZ...nLznsLzOTmpStI

Thanks!!

[petro]

The update didn't show for me when entering my Vin for my '14, it said I was already up to date. I was on 003.003.001. I can confirm that I was able to load the software update provided above which updated the TN to 003.255.080 and added HN as well. So far Spotify via Bluetooth on my Pixel 2XL works better when skipping tracks and is better at updating track info, but it is early days.

[KTE]

010.012.001 Both media and telephone


The update available on BMW UK is MV 110.005.011 & TV 110.005.030.


Formatted 3 flash drives, each on Fat32 and downloaded the .bin file. Sometimes the iDrive would say please wait, then resulting in "incompatible". Otherwise would show with nothing on the flash drive or incompatible..

Only tried with ignition on, must the engine be running?

[XxThe_RemedyXx]

Originally Posted by KTE

010.012.001 Both media and telephone


The update available on BMW UK is MV 110.005.011 & TV 110.005.030.


Formatted 3 flash drives, each on Fat32 and downloaded the .bin file. Sometimes the iDrive would say please wait, then resulting in "incompatible". Otherwise would show with nothing on the flash drive or incompatible..

Only tried with ignition on, must the engine be running?

I usually do the updates with ignition ON.

[MarkoSK]

If you don't push the break pedal while pressing START, you'll turn on the electronics without turning the engine on. You can then update software, code the car, etc.

[IAmATeaf]

Originally Posted by MarkoSK

If you don't push the break pedal while pressing START, you'll turn on the electronics without turning the engine on. You can then update software, code the car, etc.

For a small update like this you’d could do the above but for any coding I’d always switch the engine on, last thing you want is for the electronics to switch off midway through coding as you’ve taken a bit longer before hitting the code button!

[ptzbmw]

Just updated mine, took 2 mins, no noticeable changes but we'll see.