[straightdraw84]

Since everyone has a lot of free time right now, I thought I'd get this done.

Used the following products:

https://www.amazon.com/Bondo-280-Bum...5610142&sr=8-2

https://www.amazon.com/Bondo-Glazing..._=sb_s_sparkle

https://www.amazon.com/Meguiars-G192...5610273&sr=8-4

https://www.amazon.com/Meguiars-G172...5610296&sr=8-9

and of course rubbing alcohol, sand papers (80-5000 grit), primer/475 black sapphire paint/clear coat

Taped up the parts on the headlights that might get scratched during removal, also got some foam pads just in case:





Damaged areas cleaned, sanded, puttied, then sanded again (very high grit), cleaned with rubbing alcohol:



Primer:



Paint layers, clear coat, compound then polish:



Final: